linux-kernel - [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20170928081828.20335-3-wenyou.yang@microchip.com>
Date:   Thu, 28 Sep 2017 16:18:25 +0800
From:   Wenyou Yang <wenyou.yang@...rochip.com>
To:     Mauro Carvalho Chehab <mchehab@...pensource.com>
CC:     <linux-kernel@...r.kernel.org>,
        Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Sakari Ailus <sakari.ailus@....fi>,
        "Jonathan Corbet" <corbet@....net>,
        Hans Verkuil <hverkuil@...all.nl>,
        <linux-arm-kernel@...ts.infradead.org>,
        Linux Media Mailing List <linux-media@...r.kernel.org>,
        Wenyou Yang <wenyou.yang@...rochip.com>
Subject: [PATCH v3 2/5] media: atmel-isc: Add prepare and unprepare ops

A software write operation to the ISC_CLKEN or ISC_CLKDIS register
requires double clock domain synchronization and is not permitted
when the ISC_SR.SIP is asserted. So add the .prepare and .unprepare
ops to make sure the ISC_CLKSR.SIP is unasserted before the write
operation to the ISC_CLKEN or ISC_CLKDIS register.

Signed-off-by: Wenyou Yang <wenyou.yang@...rochip.com>
---

Changes in v3: None
Changes in v2: None

 drivers/media/platform/atmel/atmel-isc-regs.h |  1 +
 drivers/media/platform/atmel/atmel-isc.c      | 30 +++++++++++++++++++++++++++
 2 files changed, 31 insertions(+)

diff --git a/drivers/media/platform/atmel/atmel-isc-regs.h b/drivers/media/platform/atmel/atmel-isc-regs.h
index 6936ac467609..93e58fcf1d5f 100644
--- a/drivers/media/platform/atmel/atmel-isc-regs.h
+++ b/drivers/media/platform/atmel/atmel-isc-regs.h
@@ -42,6 +42,7 @@
 
 /* ISC Clock Status Register */
 #define ISC_CLKSR               0x00000020
+#define ISC_CLKSR_SIP		BIT(31)
 
 #define ISC_CLK(n)		BIT(n)
 
diff --git a/drivers/media/platform/atmel/atmel-isc.c b/drivers/media/platform/atmel/atmel-isc.c
index 991f962b7023..0b15dc1a3a0b 100644
--- a/drivers/media/platform/atmel/atmel-isc.c
+++ b/drivers/media/platform/atmel/atmel-isc.c
@@ -308,6 +308,34 @@ module_param(sensor_preferred, uint, 0644);
 MODULE_PARM_DESC(sensor_preferred,
 		 "Sensor is preferred to output the specified format (1-on 0-off), default 1");
 
+static int isc_wait_clk_stable(struct clk_hw *hw)
+{
+	struct isc_clk *isc_clk = to_isc_clk(hw);
+	struct regmap *regmap = isc_clk->regmap;
+	unsigned long timeout = jiffies + usecs_to_jiffies(1000);
+	unsigned int status;
+
+	while (time_before(jiffies, timeout)) {
+		regmap_read(regmap, ISC_CLKSR, &status);
+		if (!(status & ISC_CLKSR_SIP))
+			return 0;
+
+		usleep_range(10, 250);
+	}
+
+	return -ETIMEDOUT;
+}
+
+static int isc_clk_prepare(struct clk_hw *hw)
+{
+	return isc_wait_clk_stable(hw);
+}
+
+static void isc_clk_unprepare(struct clk_hw *hw)
+{
+	isc_wait_clk_stable(hw);
+}
+
 static int isc_clk_enable(struct clk_hw *hw)
 {
 	struct isc_clk *isc_clk = to_isc_clk(hw);
@@ -459,6 +487,8 @@ static int isc_clk_set_rate(struct clk_hw *hw,
 }
 
 static const struct clk_ops isc_clk_ops = {
+	.prepare	= isc_clk_prepare,
+	.unprepare	= isc_clk_unprepare,
 	.enable		= isc_clk_enable,
 	.disable	= isc_clk_disable,
 	.is_enabled	= isc_clk_is_enabled,
-- 
2.13.0