| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170928092949.GB30097@localhost>
Date: Thu, 28 Sep 2017 14:59:49 +0530
From: Vinod Koul <vinod.koul@...el.com>
To: Dmitry Osipenko <digetx@...il.com>
Cc: Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Laxman Dewangan <ldewangan@...dia.com>,
Peter De Schrijver <pdeschrijver@...dia.com>,
Prashant Gaikwad <pgaikwad@...dia.com>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>, linux-tegra@...r.kernel.org,
devicetree@...r.kernel.org, dmaengine@...r.kernel.org,
linux-clk@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v1 4/5] dmaengine: Add driver for NVIDIA Tegra AHB DMA
controller
On Tue, Sep 26, 2017 at 02:22:05AM +0300, Dmitry Osipenko wrote:
> +config TEGRA20_AHB_DMA
> + tristate "NVIDIA Tegra20 AHB DMA support"
> + depends on ARCH_TEGRA
Can we add COMPILE_TEST, helps me compile drivers
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of_device.h>
> +#include <linux/of_dma.h>
> +#include <linux/platform_device.h>
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +#include <linux/spinlock.h>
no vchan.h, so i presume we are not using that here, any reason why?
> +
> +#include "dmaengine.h"
> +
> +#define TEGRA_AHBDMA_CMD 0x0
> +#define TEGRA_AHBDMA_CMD_ENABLE BIT(31)
> +
> +#define TEGRA_AHBDMA_IRQ_ENB_MASK 0x20
> +#define TEGRA_AHBDMA_IRQ_ENB_CH(ch) BIT(ch)
> +
> +#define TEGRA_AHBDMA_CHANNEL_BASE(ch) (0x1000 + (ch) * 0x20)
> +
> +#define TEGRA_AHBDMA_CHANNEL_CSR 0x0
> +#define TEGRA_AHBDMA_CHANNEL_ADDR_WRAP BIT(18)
> +#define TEGRA_AHBDMA_CHANNEL_FLOW BIT(24)
> +#define TEGRA_AHBDMA_CHANNEL_ONCE BIT(26)
> +#define TEGRA_AHBDMA_CHANNEL_DIR_TO_XMB BIT(27)
> +#define TEGRA_AHBDMA_CHANNEL_IE_EOC BIT(30)
> +#define TEGRA_AHBDMA_CHANNEL_ENABLE BIT(31)
> +#define TEGRA_AHBDMA_CHANNEL_REQ_SEL_SHIFT 16
> +#define TEGRA_AHBDMA_CHANNEL_WCOUNT_MASK 0xFFFC
GENMASK() ?
> +static void tegra_ahbdma_tasklet(unsigned long data)
> +{
> + struct tegra_ahbdma_tx_desc *tx = (struct tegra_ahbdma_tx_desc *)data;
> + struct dma_async_tx_descriptor *desc = &tx->desc;
> +
> + dmaengine_desc_get_callback_invoke(desc, NULL);
> +
> + if (!tx->cyclic && !dmaengine_desc_test_reuse(desc))
> + kfree(tx);
lot of code here can be reduced if we use vchan
> +static struct dma_async_tx_descriptor *tegra_ahbdma_prep_dma_cyclic(
> + struct dma_chan *chan,
> + dma_addr_t buf_addr,
> + size_t buf_len,
> + size_t period_len,
> + enum dma_transfer_direction dir,
> + unsigned long flags)
> +{
> + struct tegra_ahbdma_tx_desc *tx;
> +
> + /* unimplemented */
> + if (buf_len != period_len || buf_len > SZ_64K)
> + return NULL;
> +
> + tx = kzalloc(sizeof(*tx), GFP_KERNEL);
> + if (!tx)
> + return NULL;
> +
> + dma_async_tx_descriptor_init(&tx->desc, chan);
> +
> + tx->desc.tx_submit = tegra_ahbdma_tx_submit;
> + tx->mem_paddr = buf_addr;
> + tx->size = buf_len;
> + tx->flags = flags;
> + tx->cyclic = true;
> + tx->dir = dir;
> +
> + tasklet_init(&tx->tasklet, tegra_ahbdma_tasklet, (unsigned long)tx);
why not precalulcate the register settings here. While submitting you are in
hot path keeping dmaengine idle so faster you can submit, better the perf
> +static void tegra_ahbdma_issue_pending(struct dma_chan *chan)
> +{
> + struct tegra_ahbdma_chan *ahbdma_chan = to_ahbdma_chan(chan);
> + struct tegra_ahbdma_tx_desc *tx;
> + struct list_head *entry, *tmp;
> + unsigned long flags;
> +
> + spin_lock_irqsave(&ahbdma_chan->lock, flags);
> +
> + list_for_each_safe(entry, tmp, &ahbdma_chan->pending_list)
> + list_move_tail(entry, &ahbdma_chan->active_list);
> +
> + if (completion_done(&ahbdma_chan->idling)) {
> + tx = list_first_entry_or_null(&ahbdma_chan->active_list,
> + struct tegra_ahbdma_tx_desc,
> + node);
> + if (tx) {
> + tegra_ahbdma_submit_tx(ahbdma_chan, tx);
what is chan is already running?
> + reinit_completion(&ahbdma_chan->idling);
> + }
> + }
> +
> + spin_unlock_irqrestore(&ahbdma_chan->lock, flags);
> +}
> +
> +static enum dma_status tegra_ahbdma_tx_status(struct dma_chan *chan,
> + dma_cookie_t cookie,
> + struct dma_tx_state *state)
> +{
> + struct tegra_ahbdma_chan *ahbdma_chan = to_ahbdma_chan(chan);
> + struct tegra_ahbdma_tx_desc *tx;
> + enum dma_status cookie_status;
> + unsigned long flags;
> + size_t residual;
> + u32 status;
> +
> + spin_lock_irqsave(&ahbdma_chan->lock, flags);
> +
> + cookie_status = dma_cookie_status(chan, cookie, state);
> + if (cookie_status != DMA_COMPLETE) {
residue can be NULL so check it before proceeding ahead
> +static int tegra_ahbdma_config(struct dma_chan *chan,
> + struct dma_slave_config *sconfig)
> +{
> + struct tegra_ahbdma_chan *ahbdma_chan = to_ahbdma_chan(chan);
> + enum dma_transfer_direction dir = sconfig->direction;
> + u32 burst, ahb_seq, ahb_addr;
> +
> + if (sconfig->src_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES ||
> + sconfig->dst_addr_width != DMA_SLAVE_BUSWIDTH_4_BYTES)
> + return -EINVAL;
> +
> + if (dir == DMA_DEV_TO_MEM) {
> + burst = sconfig->src_maxburst;
> + ahb_addr = sconfig->src_addr;
> + } else {
> + burst = sconfig->dst_maxburst;
> + ahb_addr = sconfig->dst_addr;
> + }
> +
> + switch (burst) {
> + case 1: burst = TEGRA_AHBDMA_CHANNEL_AHB_BURST_1; break;
> + case 4: burst = TEGRA_AHBDMA_CHANNEL_AHB_BURST_4; break;
> + case 8: burst = TEGRA_AHBDMA_CHANNEL_AHB_BURST_8; break;
pls make this statement and break on subsequent lines, readablity matters
> + default:
> + return -EINVAL;
> + }
> +
> + ahb_seq = burst << TEGRA_AHBDMA_CHANNEL_AHB_BURST_SHIFT;
> + ahb_seq |= TEGRA_AHBDMA_CHANNEL_ADDR_WRAP;
> + ahb_seq |= TEGRA_AHBDMA_CHANNEL_INTR_ENB;
> +
> + writel_relaxed(ahb_seq,
> + ahbdma_chan->regs + TEGRA_AHBDMA_CHANNEL_AHB_SEQ);
> +
> + writel_relaxed(ahb_addr,
> + ahbdma_chan->regs + TEGRA_AHBDMA_CHANNEL_AHB_PTR);
oh no, you don't write to HW here. This can be called anytime when you have
txn running! You should save these and use them in prep_ calls.
> +static int tegra_ahbdma_remove(struct platform_device *pdev)
> +{
> + struct tegra_ahbdma *tdma = platform_get_drvdata(pdev);
> +
> + of_dma_controller_free(pdev->dev.of_node);
> + dma_async_device_unregister(&tdma->dma_dev);
> + clk_disable_unprepare(tdma->clk);
not ensuring tasklets are killed and irq is freed so no more tasklets can
run? I think that needs to be done...
> +MODULE_DESCRIPTION("NVIDIA Tegra AHB DMA Controller driver");
> +MODULE_AUTHOR("Dmitry Osipenko <digetx@...il.com>");
> +MODULE_LICENSE("GPL");
MODULE_ALIAS?
--
~Vinod
Powered by blists - more mailing lists