[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20170929082306.16193-12-wens@csie.org>
Date: Fri, 29 Sep 2017 16:23:03 +0800
From: Chen-Yu Tsai <wens@...e.org>
To: Mark Brown <broonie@...nel.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
David Airlie <airlied@...ux.ie>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...eaurora.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>
Cc: Chen-Yu Tsai <wens@...e.org>, dri-devel@...ts.freedesktop.org,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-sunxi@...glegroups.com
Subject: [PATCH v3 11/14] drm/sun4i: hdmi: Add A31 specific DDC register definitions
The DDC block for the HDMI controller is different on the A31.
This patch adds the register definitions.
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Acked-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
drivers/gpu/drm/sun4i/sun4i_hdmi.h | 31 +++++++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/drivers/gpu/drm/sun4i/sun4i_hdmi.h b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
index b1124a8f9f05..da4ea9efc6fa 100644
--- a/drivers/gpu/drm/sun4i/sun4i_hdmi.h
+++ b/drivers/gpu/drm/sun4i/sun4i_hdmi.h
@@ -153,6 +153,37 @@
#define SUN4I_HDMI_DDC_FIFO_SIZE 16
+/* A31 specific */
+#define SUN6I_HDMI_DDC_CTRL_REG 0x500
+#define SUN6I_HDMI_DDC_CTRL_RESET BIT(31)
+#define SUN6I_HDMI_DDC_CTRL_START_CMD BIT(27)
+#define SUN6I_HDMI_DDC_CTRL_SDA_ENABLE BIT(6)
+#define SUN6I_HDMI_DDC_CTRL_SCL_ENABLE BIT(4)
+#define SUN6I_HDMI_DDC_CTRL_ENABLE BIT(0)
+
+#define SUN6I_HDMI_DDC_CMD_REG 0x508
+#define SUN6I_HDMI_DDC_CMD_BYTE_COUNT(count) ((count) << 16)
+/* command types in lower 3 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_ADDR_REG 0x50c
+#define SUN6I_HDMI_DDC_ADDR_SEGMENT(seg) (((seg) & 0xff) << 24)
+#define SUN6I_HDMI_DDC_ADDR_EDDC(addr) (((addr) & 0xff) << 16)
+#define SUN6I_HDMI_DDC_ADDR_OFFSET(off) (((off) & 0xff) << 8)
+#define SUN6I_HDMI_DDC_ADDR_SLAVE(addr) (((addr) & 0xff) << 1)
+
+#define SUN6I_HDMI_DDC_INT_STATUS_REG 0x514
+#define SUN6I_HDMI_DDC_INT_STATUS_TIMEOUT BIT(8)
+/* lower 8 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_FIFO_CTRL_REG 0x518
+#define SUN6I_HDMI_DDC_FIFO_CTRL_CLEAR BIT(15)
+/* lower 9 bits are the same as sun4i */
+
+#define SUN6I_HDMI_DDC_CLK_REG 0x520
+/* DDC CLK bit fields are the same, but the formula is not */
+
+#define SUN6I_HDMI_DDC_FIFO_DATA_REG 0x580
+
enum sun4i_hdmi_pkt_type {
SUN4I_HDMI_PKT_AVI = 2,
SUN4I_HDMI_PKT_END = 15,
--
2.14.2
Powered by blists - more mailing lists