linux-kernel - Re: [PATCH v3] mmc: dt-bindings: Add reg/source

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <f5ef95bf-a085-194b-4412-c72a7813ac08@gmail.com>
Date:   Fri, 29 Sep 2017 13:11:49 +0200
From:   Matthias Brugger <matthias.bgg@...il.com>
To:     Chaotian Jing <chaotian.jing@...iatek.com>,
        Rob Herring <robh+dt@...nel.org>
Cc:     Ulf Hansson <ulf.hansson@...aro.org>,
        Mark Rutland <mark.rutland@....com>,
        Catalin Marinas <catalin.marinas@....com>,
        Will Deacon <will.deacon@....com>,
        yong mao <yong.mao@...iatek.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Javier Martinez Canillas <javier@....samsung.com>,
        Heiner Kallweit <hkallweit1@...il.com>,
        Phong LE <ple@...libre.com>, linux-mmc@...r.kernel.org,
        devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
        srv_heupstream@...iatek.com
Subject: Re: [PATCH v3] mmc: dt-bindings: Add reg/source_cg/latch-ck for
 Mediatek MMC bindings



On 09/22/2017 02:03 PM, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
> Note that source_cg and mediatek,latch-ck are optional for some projects,
> eg, MT2701 do not have source_cg, and MT2712 do not need
> mediatek,latch-ck
> 
> Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> ---
>   Documentation/devicetree/bindings/mmc/mtk-sd.txt | 13 ++++++++++---
>   1 file changed, 10 insertions(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..b934a29 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,15 @@ This file documents differences between the core properties in mmc.txt
>   and the properties used by the msdc driver.
>   
>   Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> +	"mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> +	"mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> +	"mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> +	"mediatek,mt2712-mmc": for mmc host ip compatible with mt2712

NAK, this has to be:
You have to add the fallback comatible ("mediatek,mt8135-mmc") to the binding 
description as otherwise the driver does not get probed.

Regards,
Matthias

> +- reg: physical base address of the controller and length
>   - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: MSDC source clock, HCLK, source_cg
> +- clock-names: "source", "hclk", "source_cg"
>   - pinctrl-names: should be "default", "state_uhs"
>   - pinctrl-0: should contain default/high speed pin ctrl
>   - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +35,8 @@ Optional properties:
>   - mediatek,hs400-cmd-resp-sel-rising:  HS400 command response sample selection
>   				       If present,HS400 command responses are sampled on rising edges.
>   				       If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
> +		     error caused by stop clock(fifo full)
>   
>   Examples:
>   mmc0: mmc@...30000 {
>