| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20170929044505.3410-1-ran.wang_1@nxp.com>
Date: Fri, 29 Sep 2017 12:45:05 +0800
From: Ran Wang <ran.wang_1@....com>
To: Felipe Balbi <balbi@...nel.org>,
"open list:USB SUBSYSTEM" <linux-usb@...r.kernel.org>
CC: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
Ran Wang <ran.wang_1@....com>
Subject: [PATCH] usb: dwc3: workaround: disable device-initiated U1/U2
Issue: When the USB controller is configured as a USB device
mode, the device initiates low power when an ACK is pending for a
data packet (DP). When operating in SuperSpeed mode and when the
internal condition for low power (u1/u2) is satisfied, the device
initiates u1/u2 even though it has just received a DPH of the DP
header (DPH). This causes the link to enter and exit low power before
the device sends an ACK for the DP. This behavior can cause a
transaction timeout on the host for the DP. Impact: Depending on the
host transaction timeout value, the host may timeout on the
transaction and the host retries the transfer. If the same issue
happens again, this could result in the host resetting the device and
re-enumerating.
Workaround: Disable USB_DCTL (InitU1Ena, InitU2Ena) bits. As a
result,the device does not initiate lowpower requests; however,
it can still accept low-power requests from the host/hub and enter
low power.
Signed-off-by: Ran Wang <ran.wang_1@....com>
---
Documentation/devicetree/bindings/usb/dwc3.txt | 2 ++
drivers/usb/dwc3/core.c | 2 ++
drivers/usb/dwc3/core.h | 2 ++
drivers/usb/dwc3/ep0.c | 4 ++--
drivers/usb/dwc3/gadget.c | 7 +++++++
5 files changed, 15 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt
index 7d4f90c16cd4..9afa8e95831e 100644
--- a/Documentation/devicetree/bindings/usb/dwc3.txt
+++ b/Documentation/devicetree/bindings/usb/dwc3.txt
@@ -47,6 +47,8 @@ Optional properties:
from P0 to P1/P2/P3 without delay.
- snps,dis-tx-ipgap-linecheck-quirk: when set, disable u2mac linestate check
during HS transmit.
+ - snps,disable_devinit_u1u2: when set, disable device-initiated U1/U2
+ LPM request in USB device mode.
- snps,is-utmi-l1-suspend: true when DWC3 asserts output signal
utmi_l1_suspend_n, false when asserts utmi_sleep_n
- snps,hird-threshold: HIRD threshold
diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
index f13096b0900e..63d599872a43 100644
--- a/drivers/usb/dwc3/core.c
+++ b/drivers/usb/dwc3/core.c
@@ -1143,6 +1143,8 @@ static void dwc3_get_properties(struct dwc3 *dwc)
dwc->tx_de_emphasis_quirk = device_property_read_bool(dev,
"snps,tx_de_emphasis_quirk");
+ dwc->disable_devinit_u1u2_quirk = device_property_read_bool(dev,
+ "snps,disable_devinit_u1u2");
device_property_read_u8(dev, "snps,tx_de_emphasis",
&tx_de_emphasis);
device_property_read_string(dev, "snps,hsphy_interface",
diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h
index 7c2f84dc218a..2be63c1a6ab6 100644
--- a/drivers/usb/dwc3/core.h
+++ b/drivers/usb/dwc3/core.h
@@ -896,6 +896,7 @@ struct dwc3_scratchpad_array {
* 1 - -3.5dB de-emphasis
* 2 - No de-emphasis
* 3 - Reserved
+ * @disable_devinit_u1u2_quirk: disable device-initiated U1/U2 request.
* @imod_interval: set the interrupt moderation interval in 250ns
* increments or 0 to disable.
*/
@@ -1057,6 +1058,7 @@ struct dwc3 {
unsigned tx_de_emphasis_quirk:1;
unsigned tx_de_emphasis:2;
+ unsigned disable_devinit_u1u2_quirk:1;
u16 imod_interval;
};
diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c
index 827e376bfa97..bbbf46f031e2 100644
--- a/drivers/usb/dwc3/ep0.c
+++ b/drivers/usb/dwc3/ep0.c
@@ -391,7 +391,7 @@ static int dwc3_ep0_handle_u1(struct dwc3 *dwc, enum usb_device_state state,
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (set)
+ if (set && !dwc->disable_devinit_u1u2_quirk)
reg |= DWC3_DCTL_INITU1ENA;
else
reg &= ~DWC3_DCTL_INITU1ENA;
@@ -413,7 +413,7 @@ static int dwc3_ep0_handle_u2(struct dwc3 *dwc, enum usb_device_state state,
return -EINVAL;
reg = dwc3_readl(dwc->regs, DWC3_DCTL);
- if (set)
+ if (set && !dwc->disable_devinit_u1u2_quirk)
reg |= DWC3_DCTL_INITU2ENA;
else
reg &= ~DWC3_DCTL_INITU2ENA;
diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c
index f064f1549333..61141c6350dc 100644
--- a/drivers/usb/dwc3/gadget.c
+++ b/drivers/usb/dwc3/gadget.c
@@ -3199,6 +3199,7 @@ int dwc3_gadget_init(struct dwc3 *dwc)
{
int ret;
int irq;
+ u32 reg;
irq = dwc3_gadget_get_irq(dwc);
if (irq < 0) {
@@ -3275,6 +3276,12 @@ int dwc3_gadget_init(struct dwc3 *dwc)
goto err4;
}
+ if (dwc->disable_devinit_u1u2_quirk) {
+ reg = dwc3_readl(dwc->regs, DWC3_DCTL);
+ reg &= ~(DWC3_DCTL_INITU1ENA | DWC3_DCTL_INITU2ENA);
+ dwc3_writel(dwc->regs, DWC3_DCTL, reg);
+ }
+
return 0;
err4:
--
2.14.1
Powered by blists - more mailing lists