| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Sun, 1 Oct 2017 07:26:05 -0700
From: Guenter Roeck <linux@...ck-us.net>
To: Sudeep Holla <Sudeep.Holla@....com>
Cc: ALKML <linux-arm-kernel@...ts.infradead.org>,
LKML <linux-kernel@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
Roy Franz <roy.franz@...ium.com>,
Harb Abdulhamid <harba@...eaurora.org>,
Nishanth Menon <nm@...com>, Arnd Bergmann <arnd@...db.de>,
Loc Ho <lho@....com>, Alexey Klimov <alexey.klimov@....com>,
Ryan Harkin <Ryan.Harkin@....com>,
Jassi Brar <jassisinghbrar@...il.com>,
linux-hwmon@...r.kernel.org
Subject: Re: [v3,20/22] hwmon: add support for sensors exported via ARM SCMI
On Thu, Sep 28, 2017 at 02:11:44PM +0100, Sudeep Holla wrote:
> Create a driver to add support for SoC sensors exported by the System
> Control Processor (SCP) via the System Control and Management Interface
> (SCMI). The supported sensor types is one of voltage, temperature,
> current, and power.
>
> The sensor labels and values provided by the SCP are exported via the
> hwmon sysfs interface.
>
> Cc: Guenter Roeck <linux@...ck-us.net>
> Cc: linux-hwmon@...r.kernel.org
> Signed-off-by: Sudeep Holla <sudeep.holla@....com>
Couple of minor comments. With those addressed,
Acked-by: Guenter Roeck <linux@...ck-us.net>
> ---
> drivers/hwmon/Kconfig | 12 +++
> drivers/hwmon/Makefile | 1 +
> drivers/hwmon/scmi-hwmon.c | 235 +++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 248 insertions(+)
> create mode 100644 drivers/hwmon/scmi-hwmon.c
>
> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
> index d65431417b17..0b75e9a89463 100644
> --- a/drivers/hwmon/Kconfig
> +++ b/drivers/hwmon/Kconfig
> @@ -321,6 +321,18 @@ config SENSORS_APPLESMC
> Say Y here if you have an applicable laptop and want to experience
> the awesome power of applesmc.
>
> +config SENSORS_ARM_SCMI
> + tristate "ARM SCMI Sensors"
> + depends on ARM_SCMI_PROTOCOL
> + depends on THERMAL || !THERMAL_OF
> + help
> + This driver provides support for temperature, voltage, current
> + and power sensors available on SCMI based platforms. The actual
> + number and type of sensors exported depend on the platform.
> +
> + This driver can also be built as a module. If so, the module
> + will be called scmi-hwmon.
> +
> config SENSORS_ARM_SCPI
> tristate "ARM SCPI Sensors"
> depends on ARM_SCPI_PROTOCOL
> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
> index c84d9784be98..a51c2dcef11c 100644
> --- a/drivers/hwmon/Makefile
> +++ b/drivers/hwmon/Makefile
> @@ -44,6 +44,7 @@ obj-$(CONFIG_SENSORS_ADT7462) += adt7462.o
> obj-$(CONFIG_SENSORS_ADT7470) += adt7470.o
> obj-$(CONFIG_SENSORS_ADT7475) += adt7475.o
> obj-$(CONFIG_SENSORS_APPLESMC) += applesmc.o
> +obj-$(CONFIG_SENSORS_ARM_SCMI) += scmi-hwmon.o
> obj-$(CONFIG_SENSORS_ARM_SCPI) += scpi-hwmon.o
> obj-$(CONFIG_SENSORS_ASC7621) += asc7621.o
> obj-$(CONFIG_SENSORS_ASPEED) += aspeed-pwm-tacho.o
> diff --git a/drivers/hwmon/scmi-hwmon.c b/drivers/hwmon/scmi-hwmon.c
> new file mode 100644
> index 000000000000..0a8c0e8dc5d1
> --- /dev/null
> +++ b/drivers/hwmon/scmi-hwmon.c
> @@ -0,0 +1,235 @@
> +/*
> + * System Control and Management Interface(SCMI) based hwmon sensor driver
> + *
> + * Copyright (C) 2017 ARM Ltd.
> + * Sudeep Holla <sudeep.holla@....com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + * This program is distributed "as is" WITHOUT ANY WARRANTY of any
> + * kind, whether express or implied; without even the implied warranty
> + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/hwmon.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/scmi_protocol.h>
> +#include <linux/slab.h>
> +#include <linux/sysfs.h>
> +#include <linux/thermal.h>
> +
> +struct scmi_sensors {
> + const struct scmi_handle *handle;
> + const struct scmi_sensor_info **info[hwmon_max];
> +};
> +
> +static int scmi_hwmon_read(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, long *val)
> +{
> + int ret;
> + u64 value;
> + const struct scmi_sensor_info *sensor;
> + struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
> + const struct scmi_handle *h = scmi_sensors->handle;
> +
> + sensor = *(scmi_sensors->info[type] + channel);
> + ret = h->sensor_ops->reading_get(h, sensor->id, false, &value);
> + if (!ret)
> + *val = value;
> +
> + return ret;
> +}
> +
> +static int
> +scmi_hwmon_read_string(struct device *dev, enum hwmon_sensor_types type,
> + u32 attr, int channel, const char **str)
> +{
> + const struct scmi_sensor_info *sensor;
> + struct scmi_sensors *scmi_sensors = dev_get_drvdata(dev);
> +
> + sensor = *(scmi_sensors->info[type] + channel);
> + *str = sensor->name;
> +
> + return 0;
> +}
> +
> +static umode_t
> +scmi_hwmon_is_visible(const void *drvdata, enum hwmon_sensor_types type,
> + u32 attr, int channel)
> +{
> + const struct scmi_sensor_info *sensor;
> + const struct scmi_sensors *scmi_sensors = drvdata;
> +
> + sensor = *(scmi_sensors->info[type] + channel);
> + if (sensor && sensor->name)
> + return S_IRUGO;
> +
> + return 0;
> +}
> +
> +static const struct hwmon_ops scmi_hwmon_ops = {
> + .is_visible = scmi_hwmon_is_visible,
> + .read = scmi_hwmon_read,
> + .read_string = scmi_hwmon_read_string,
> +};
> +
> +static struct hwmon_chip_info scmi_chip_info = {
> + .ops = &scmi_hwmon_ops,
> + .info = NULL,
> +};
> +
> +static int scmi_hwmon_add_chan_info(struct hwmon_channel_info *scmi_hwmon_chan,
> + struct device *dev, int num,
> + enum hwmon_sensor_types type, u32 config)
> +{
> + int i;
> + u32 *cfg = devm_kcalloc(dev, num + 1, sizeof(*cfg), GFP_KERNEL);
> +
> + if (!cfg)
> + return -ENOMEM;
> +
> + scmi_hwmon_chan->type = type;
> + scmi_hwmon_chan->config = cfg;
> + for (i = 0; i < num; i++, cfg++)
> + *cfg = config;
> +
> + return 0;
> +}
> +
> +static enum hwmon_sensor_types scmi_types[] = {
> + [TEMPERATURE_C] = hwmon_temp,
> + [VOLTAGE] = hwmon_in,
> + [CURRENT] = hwmon_curr,
> + [POWER] = hwmon_power,
> + [ENERGY] = hwmon_energy,
> +};
> +
> +static u32 hwmon_attributes[] = {
> + [hwmon_chip] = HWMON_C_REGISTER_TZ,
> + [hwmon_temp] = HWMON_T_INPUT | HWMON_T_LABEL,
> + [hwmon_in] = HWMON_I_INPUT | HWMON_I_LABEL,
> + [hwmon_curr] = HWMON_C_INPUT | HWMON_C_LABEL,
> + [hwmon_power] = HWMON_P_INPUT | HWMON_P_LABEL,
> + [hwmon_energy] = HWMON_E_INPUT | HWMON_E_LABEL,
> +};
> +
> +static int scmi_hwmon_probe(struct platform_device *pdev)
> +{
> + int i, idx;
> + u16 nr_sensors;
> + enum hwmon_sensor_types type;
> + struct scmi_sensors *scmi_sensors;
> + const struct scmi_sensor_info *sensor;
> + int nr_count[hwmon_max] = {0}, nr_types = 0;
> + const struct hwmon_chip_info *chip_info;
> + struct device *hwdev, *dev = &pdev->dev;
> + struct hwmon_channel_info *scmi_hwmon_chan;
> + const struct hwmon_channel_info **ptr_scmi_ci;
> + const struct scmi_handle *handle = devm_scmi_handle_get(dev);
> +
> + if (IS_ERR_OR_NULL(handle) || !handle->sensor_ops)
> + return -EPROBE_DEFER;
> +
> + nr_sensors = handle->sensor_ops->count_get(handle);
> + if (!nr_sensors)
> + return -EIO;
> +
> + scmi_sensors = devm_kzalloc(dev, sizeof(*scmi_sensors), GFP_KERNEL);
> + if (!scmi_sensors)
> + return -ENOMEM;
> +
> + scmi_sensors->handle = handle;
> +
> + for (i = 0; i < nr_sensors; i++) {
> + sensor = handle->sensor_ops->info_get(handle, i);
> + if (!sensor)
> + return PTR_ERR(sensor);
> +
> + switch (sensor->type) {
> + case TEMPERATURE_C:
> + case VOLTAGE:
> + case CURRENT:
> + case POWER:
> + case ENERGY:
> + type = scmi_types[sensor->type];
> + if (!nr_count[type])
> + nr_types++;
> + nr_count[type]++;
> + break;
> + }
> + }
> +
> + if (nr_count[hwmon_temp])
> + nr_count[hwmon_chip]++, nr_types++;
> +
> + scmi_hwmon_chan = devm_kcalloc(dev, nr_types, sizeof(*scmi_hwmon_chan),
> + GFP_KERNEL);
> + if (!scmi_hwmon_chan)
> + return -ENOMEM;
> +
> + ptr_scmi_ci = devm_kcalloc(dev, nr_types + 1, sizeof(*ptr_scmi_ci),
> + GFP_KERNEL);
> + if (!ptr_scmi_ci)
> + return -ENOMEM;
> +
> + scmi_chip_info.info = ptr_scmi_ci;
> + chip_info = &scmi_chip_info;
> +
> + for (type = 0; type < hwmon_max && nr_count[type]; type++) {
> + scmi_hwmon_add_chan_info(scmi_hwmon_chan, dev, nr_count[type],
> + type, hwmon_attributes[type]);
> + *ptr_scmi_ci++ = scmi_hwmon_chan++;
> +
> + scmi_sensors->info[type] =
> + devm_kcalloc(dev, nr_count[type],
> + sizeof(*scmi_sensors->info), GFP_KERNEL);
> + if (!scmi_sensors->info[type])
> + return -ENOMEM;
> + }
> +
> + *ptr_scmi_ci = NULL;
Unnecessary; devm_kcalloc() clears out the allocated memory.
> + platform_set_drvdata(pdev, scmi_sensors);
> +
> + for (i = nr_sensors - 1; i >= 0 ; i--) {
> + sensor = handle->sensor_ops->info_get(handle, i);
> + if (!sensor)
> + continue;
> +
> + switch (sensor->type) {
> + case TEMPERATURE_C:
> + case VOLTAGE:
> + case CURRENT:
> + case POWER:
> + case ENERGY:
> + type = scmi_types[sensor->type];
> + idx = --nr_count[type];
> + *(scmi_sensors->info[type] + idx) = sensor;
> + break;
> + }
> + }
> +
> + hwdev = devm_hwmon_device_register_with_info(dev, "scmi_sensors",
> + scmi_sensors, chip_info,
> + NULL);
> +
> + if (IS_ERR(hwdev))
> + return PTR_ERR(hwdev);
> +
> + return 0;
return PTR_ERR_OR_ZERO(hwdev);
> +}
> +
> +static struct platform_driver scmi_hwmon_platdrv = {
> + .driver = {
> + .name = "scmi-hwmon",
> + },
> + .probe = scmi_hwmon_probe,
> +};
> +module_platform_driver(scmi_hwmon_platdrv);
> +
> +MODULE_AUTHOR("Sudeep Holla <sudeep.holla@....com>");
> +MODULE_DESCRIPTION("ARM SCMI HWMON interface driver");
> +MODULE_LICENSE("GPL v2");
Powered by blists - more mailing lists