linux-kernel - [PATCH 2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 1 Oct 2017 21:48:17 +0200
From:   Stefan Brüns <stefan.bruens@...h-aachen.de>
To:     <linux-iio@...r.kernel.org>
CC:     Peter Meerwald-Stadler <pmeerw@...erw.net>,
        Stefan Brüns <stefan.bruens@...h-aachen.de>,
        <linux-kernel@...r.kernel.org>, "Andrew F . Davis" <afd@...com>,
        "Javier Martinez Canillas" <javier@....samsung.com>,
        Lars-Peter Clausen <lars@...afoo.de>,
        Jonathan Cameron <jic23@...nel.org>,
        Hartmut Knaack <knaack.h@....de>
Subject: [PATCH 2/3] iio: adc: ina2xx: Adhere to documented ABI, use Ohm instead of uOhm

According to the ABI documentation, the shunt resistor value should be
specificied in Ohm. As this is also used/documented for the MAX9611,
use the same for the INA2xx driver.

This poses an ABI break for anyone actually altering the shunt value
through the sysfs interface, it does not alter the default value nor
a value set from the devicetree.

Minor change: Fix comment, 1mA is 10^-3A.

Signed-off-by: Stefan Brüns <stefan.bruens@...h-aachen.de>
---

 drivers/iio/adc/ina2xx-adc.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 361fb4e459d5..1930f853e8c5 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -127,7 +127,7 @@ struct ina2xx_chip_info {
 	struct task_struct *task;
 	const struct ina2xx_config *config;
 	struct mutex state_lock;
-	unsigned int shunt_resistor;
+	unsigned int shunt_resistor_uohm;
 	int avg;
 	int int_time_vbus; /* Bus voltage integration time uS */
 	int int_time_vshunt; /* Shunt voltage integration time uS */
@@ -444,7 +444,7 @@ static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
 /*
  * Set current LSB to 1mA, shunt is in uOhms
  * (equation 13 in datasheet). We hardcode a Current_LSB
- * of 1.0 x10-6. The only remaining parameter is RShunt.
+ * of 1.0 x10-3. The only remaining parameter is RShunt.
  * There is no need to expose the CALIBRATION register
  * to the user for now. But we need to reset this register
  * if the user updates RShunt after driver init, e.g upon
@@ -453,7 +453,7 @@ static ssize_t ina2xx_allow_async_readout_store(struct device *dev,
 static int ina2xx_set_calibration(struct ina2xx_chip_info *chip)
 {
 	u16 regval = DIV_ROUND_CLOSEST(chip->config->calibration_factor,
-				   chip->shunt_resistor);
+				   chip->shunt_resistor_uohm);
 
 	return regmap_write(chip->regmap, INA2XX_CALIBRATION, regval);
 }
@@ -463,7 +463,7 @@ static int set_shunt_resistor(struct ina2xx_chip_info *chip, unsigned int val)
 	if (val <= 0 || val > chip->config->calibration_factor)
 		return -EINVAL;
 
-	chip->shunt_resistor = val;
+	chip->shunt_resistor_uohm = val;
 
 	return 0;
 }
@@ -473,8 +473,9 @@ static ssize_t ina2xx_shunt_resistor_show(struct device *dev,
 					  char *buf)
 {
 	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
+	int vals[2] = { chip->shunt_resistor_uohm, 1000000 };
 
-	return sprintf(buf, "%d\n", chip->shunt_resistor);
+	return iio_format_value(buf, IIO_VAL_FRACTIONAL, 1, vals);
 }
 
 static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
@@ -482,14 +483,13 @@ static ssize_t ina2xx_shunt_resistor_store(struct device *dev,
 					   const char *buf, size_t len)
 {
 	struct ina2xx_chip_info *chip = iio_priv(dev_to_iio_dev(dev));
-	unsigned long val;
-	int ret;
+	int val, val_fract, ret;
 
-	ret = kstrtoul((const char *) buf, 10, &val);
+	ret = iio_str_to_fixpoint(buf, 100000, &val, &val_fract);
 	if (ret)
 		return ret;
 
-	ret = set_shunt_resistor(chip, val);
+	ret = set_shunt_resistor(chip, val * 1000000 + val_fract);
 	if (ret)
 		return ret;
 
-- 
2.14.1