linux-kernel - i2c-omap.c vs. qemu: too much work in one irq (and broken boot)

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Date:   Sun, 1 Oct 2017 22:42:15 +0200
From:   Pavel Machek <pavel@....cz>
To:     pali.rohar@...il.com, sre@...nel.org,
        kernel list <linux-kernel@...r.kernel.org>,
        linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
        linux-omap@...r.kernel.org, tony@...mide.com, khilman@...nel.org,
        aaro.koskinen@....fi, ivo.g.dimitrov.75@...il.com,
        patrikbachan@...il.com, serge@...lyn.com, abcloriens@...il.com,
        clayton@...ftyguy.net, martijn@...xit.nl,
        sakari.ailus@...ux.intel.com, wsa@...-dreams.de,
        linux-i2c@...r.kernel.org, balbi@...com, jlu@...gutronix.de
Subject: i2c-omap.c vs. qemu: too much work in one irq (and broken boot)

Hi!

I'm trying to get qemu emulation of Nokia N900 to work, but
unfortunately i2c-omap.c breaks boot in the emulator (real hardware
works ok).

[    0.837524] omap2-onenand omap2-onenand: initializing on CS0, phys
base 0x01000000, virtual base d00c0000, freq 66 MHz
[    0.838958] Muxed OneNAND 256MB 1.8V 16-bit (0x40)
[    0.839752] OneNAND version = 0x0121
[    0.842102] Scanning device for bad blocks
[    1.012451] 6 ofpart partitions found on MTD device omap2-onenand
[    1.013153] Creating 6 MTD partitions on "omap2-onenand":
[    1.014007] 0x000000000000-0x000000020000 : "bootloader"
[    1.018066] 0x000000020000-0x000000080000 : "config"
[    1.020660] 0x000000080000-0x0000000c0000 : "log"
[    1.022827] 0x0000000c0000-0x0000002c0000 : "kernel"
[    1.025848] 0x0000002c0000-0x0000004c0000 : "initfs"
[    1.028106] 0x0000004c0000-0x000010000000 : "rootfs"
[    1.047668] omap_i2c 48070000.i2c: addr: 0x004b, len: 2, flags:
0x0, stop: 1
[    1.048828] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.049530] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050018] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050476] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.050872] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.051422] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052001] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052398] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.052825] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.053222] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.053619] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054016] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054412] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
[    1.054840] omap_i2c 48070000.i2c: IRQ (ISR = 0x0010)
...

After 100 messages I get "Too much work in one IRQ" message, and then
repeat. I tried just disabling omap_i2c in the dts, but 1) its not
easy 2) I'd lose quite fundamental functionality.

Ideas welcome.

Best regards,
								Pavel
								
PS: If anyone is interested, this is why working qemu would be useful:
https://wiki.postmarketos.org/wiki/Nokia_N900_(nokia-rx51) . There's a
lot of work to be done in the userspace, and swapping SD cards is kind
of slow.
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Download attachment "signature.asc" of type "application/pgp-signature" (182 bytes)