| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20171002023030.3582-15-longli@exchange.microsoft.com>
Date: Sun, 1 Oct 2017 19:30:22 -0700
From: Long Li <longli@...hange.microsoft.com>
To: Steve French <sfrench@...ba.org>, linux-cifs@...r.kernel.org,
samba-technical@...ts.samba.org, linux-kernel@...r.kernel.org,
linux-rdma@...r.kernel.org, Christoph Hellwig <hch@...radead.org>,
Tom Talpey <ttalpey@...rosoft.com>,
Matthew Wilcox <mawilcox@...rosoft.com>
Cc: Long Li <longli@...rosoft.com>
Subject: [Patch v4 14/22] CIFS: SMBD: Implement function to send data via RDMA send
From: Long Li <longli@...rosoft.com>
The transport doesn't maintain send buffers or send queue for transferring
payload via RDMA send. There is no data copy in the transport on send.
Signed-off-by: Long Li <longli@...rosoft.com>
---
fs/cifs/smbdirect.c | 248 ++++++++++++++++++++++++++++++++++++++++++++++++++++
fs/cifs/smbdirect.h | 4 +
2 files changed, 252 insertions(+)
diff --git a/fs/cifs/smbdirect.c b/fs/cifs/smbdirect.c
index b9be9d6..90e2c94 100644
--- a/fs/cifs/smbdirect.c
+++ b/fs/cifs/smbdirect.c
@@ -42,6 +42,12 @@ static int smbd_post_recv(
struct smbd_response *response);
static int smbd_post_send_empty(struct smbd_connection *info);
+static int smbd_post_send_data(
+ struct smbd_connection *info,
+ struct kvec *iov, int n_vec, int remaining_data_length);
+static int smbd_post_send_page(struct smbd_connection *info,
+ struct page *page, unsigned long offset,
+ size_t size, int remaining_data_length);
/* SMBD version number */
#define SMBD_V1 0x0100
@@ -198,6 +204,10 @@ static void smbd_destroy_rdma_work(struct work_struct *work)
log_rdma_event(INFO, "cancelling send immediate work\n");
cancel_delayed_work_sync(&info->send_immediate_work);
+ log_rdma_event(INFO, "wait for all send to finish\n");
+ wait_event(info->wait_smbd_send_pending,
+ info->smbd_send_pending == 0);
+
log_rdma_event(INFO, "wait for all recv to finish\n");
wake_up_interruptible(&info->wait_reassembly_queue);
wait_event(info->wait_smbd_recv_pending,
@@ -1103,6 +1113,24 @@ static int smbd_post_send_sgl(struct smbd_connection *info,
}
/*
+ * Send a page
+ * page: the page to send
+ * offset: offset in the page to send
+ * size: length in the page to send
+ * remaining_data_length: remaining data to send in this payload
+ */
+static int smbd_post_send_page(struct smbd_connection *info, struct page *page,
+ unsigned long offset, size_t size, int remaining_data_length)
+{
+ struct scatterlist sgl;
+
+ sg_init_table(&sgl, 1);
+ sg_set_page(&sgl, page, size, offset);
+
+ return smbd_post_send_sgl(info, &sgl, size, remaining_data_length);
+}
+
+/*
* Send an empty message
* Empty message is used to extend credits to peer to for keep live
* while there is no upper layer payload to send at the time
@@ -1114,6 +1142,35 @@ static int smbd_post_send_empty(struct smbd_connection *info)
}
/*
+ * Send a data buffer
+ * iov: the iov array describing the data buffers
+ * n_vec: number of iov array
+ * remaining_data_length: remaining data to send following this packet
+ * in segmented SMBD packet
+ */
+static int smbd_post_send_data(
+ struct smbd_connection *info, struct kvec *iov, int n_vec,
+ int remaining_data_length)
+{
+ int i;
+ u32 data_length = 0;
+ struct scatterlist sgl[SMBDIRECT_MAX_SGE];
+
+ if (n_vec > SMBDIRECT_MAX_SGE) {
+ cifs_dbg(VFS, "Can't fit data to SGL, n_vec=%d\n", n_vec);
+ return -ENOMEM;
+ }
+
+ sg_init_table(sgl, n_vec);
+ for (i = 0; i < n_vec; i++) {
+ data_length += iov[i].iov_len;
+ sg_set_buf(&sgl[i], iov[i].iov_base, iov[i].iov_len);
+ }
+
+ return smbd_post_send_sgl(info, sgl, data_length, remaining_data_length);
+}
+
+/*
* Post a receive request to the transport
* The remote peer can only send data when a receive request is posted
* The interaction is controlled by send/receive credit system
@@ -1680,6 +1737,9 @@ struct smbd_connection *_smbd_get_connection(
queue_delayed_work(info->workqueue, &info->idle_timer_work,
info->keep_alive_interval*HZ);
+ init_waitqueue_head(&info->wait_smbd_send_pending);
+ info->smbd_send_pending = 0;
+
init_waitqueue_head(&info->wait_smbd_recv_pending);
info->smbd_recv_pending = 0;
@@ -1973,3 +2033,191 @@ int smbd_recv(struct smbd_connection *info, struct msghdr *msg)
msg->msg_iter.count = 0;
return rc;
}
+
+/*
+ * Send data to transport
+ * Each rqst is transported as a SMBDirect payload
+ * rqst: the data to write
+ * return value: 0 if successfully write, otherwise error code
+ */
+int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst)
+{
+ struct kvec vec;
+ int nvecs;
+ int size;
+ int buflen = 0, remaining_data_length;
+ int start, i, j;
+ int max_iov_size =
+ info->max_send_size - sizeof(struct smbd_data_transfer);
+ struct kvec iov[SMBDIRECT_MAX_SGE];
+ int rc;
+ unsigned long long t1 = rdtsc();
+
+ info->smbd_send_pending++;
+ if (info->transport_status != SMBD_CONNECTED) {
+ rc = -ENODEV;
+ goto done;
+ }
+
+ /*
+ * This usually means a configuration error
+ * We use RDMA read/write for packet size > rdma_readwrite_threshold
+ * as long as it's properly configured we should never get into this
+ * situation
+ */
+ if (rqst->rq_nvec + rqst->rq_npages > SMBDIRECT_MAX_SGE) {
+ log_write(ERR, "maximum send segment %x exceeding %x\n",
+ rqst->rq_nvec + rqst->rq_npages, SMBDIRECT_MAX_SGE);
+ rc = -EINVAL;
+ goto done;
+ }
+
+ /*
+ * Remove the RFC1002 length defined in MS-SMB2 section 2.1
+ * It is used only for TCP transport
+ * In future we may want to add a transport layer under protocol
+ * layer so this will only be issued to TCP transport
+ */
+ iov[0].iov_base = (char *)rqst->rq_iov[0].iov_base + 4;
+ iov[0].iov_len = rqst->rq_iov[0].iov_len - 4;
+ buflen += iov[0].iov_len;
+
+ /* total up iov array first */
+ for (i = 1; i < rqst->rq_nvec; i++) {
+ iov[i].iov_base = rqst->rq_iov[i].iov_base;
+ iov[i].iov_len = rqst->rq_iov[i].iov_len;
+ buflen += iov[i].iov_len;
+ }
+
+ /* add in the page array if there is one */
+ if (rqst->rq_npages) {
+ buflen += rqst->rq_pagesz * (rqst->rq_npages - 1);
+ buflen += rqst->rq_tailsz;
+ }
+
+ if (buflen + sizeof(struct smbd_data_transfer) >
+ info->max_fragmented_send_size) {
+ log_write(ERR, "payload size %d > max size %d\n",
+ buflen, info->max_fragmented_send_size);
+ rc = -EINVAL;
+ goto done;
+ }
+
+ remaining_data_length = buflen;
+
+ log_write(INFO, "rqst->rq_nvec=%d rqst->rq_npages=%d rq_pagesz=%d "
+ "rq_tailsz=%d buflen=%d\n",
+ rqst->rq_nvec, rqst->rq_npages, rqst->rq_pagesz,
+ rqst->rq_tailsz, buflen);
+
+ start = i = iov[0].iov_len ? 0 : 1;
+ buflen = 0;
+ while (true) {
+ buflen += iov[i].iov_len;
+ if (buflen > max_iov_size) {
+ if (i > start) {
+ remaining_data_length -=
+ (buflen-iov[i].iov_len);
+ log_write(INFO, "sending iov[] from start=%d "
+ "i=%d nvecs=%d "
+ "remaining_data_length=%d\n",
+ start, i, i-start,
+ remaining_data_length);
+ rc = smbd_post_send_data(
+ info, &iov[start], i-start,
+ remaining_data_length);
+ if (rc)
+ goto done;
+ } else {
+ /* iov[start] is too big, break it */
+ nvecs = (buflen+max_iov_size-1)/max_iov_size;
+ log_write(INFO, "iov[%d] iov_base=%p buflen=%d"
+ " break to %d vectors\n",
+ start, iov[start].iov_base,
+ buflen, nvecs);
+ for (j = 0; j < nvecs; j++) {
+ vec.iov_base =
+ (char *)iov[start].iov_base +
+ j*max_iov_size;
+ vec.iov_len = max_iov_size;
+ if (j == nvecs-1)
+ vec.iov_len =
+ buflen -
+ max_iov_size*(nvecs-1);
+ remaining_data_length -= vec.iov_len;
+ log_write(INFO,
+ "sending vec j=%d iov_base=%p"
+ " iov_len=%lu "
+ "remaining_data_length=%d\n",
+ j, vec.iov_base, vec.iov_len,
+ remaining_data_length);
+ rc = smbd_post_send_data(
+ info, &vec, 1,
+ remaining_data_length);
+ if (rc)
+ goto done;
+ }
+ i++;
+ }
+ start = i;
+ buflen = 0;
+ } else {
+ i++;
+ if (i == rqst->rq_nvec) {
+ /* send out all remaining vecs */
+ remaining_data_length -= buflen;
+ log_write(INFO,
+ "sending iov[] from start=%d i=%d "
+ "nvecs=%d remaining_data_length=%d\n",
+ start, i, i-start,
+ remaining_data_length);
+ rc = smbd_post_send_data(info, &iov[start],
+ i-start, remaining_data_length);
+ if (rc)
+ goto done;
+ break;
+ }
+ }
+ log_write(INFO, "looping i=%d buflen=%d\n", i, buflen);
+ }
+
+ /* now sending pages if there are any */
+ for (i = 0; i < rqst->rq_npages; i++) {
+ buflen = (i == rqst->rq_npages-1) ?
+ rqst->rq_tailsz : rqst->rq_pagesz;
+ nvecs = (buflen + max_iov_size - 1) / max_iov_size;
+ log_write(INFO, "sending pages buflen=%d nvecs=%d\n",
+ buflen, nvecs);
+ for (j = 0; j < nvecs; j++) {
+ size = max_iov_size;
+ if (j == nvecs-1)
+ size = buflen - j*max_iov_size;
+ remaining_data_length -= size;
+ log_write(INFO, "sending pages i=%d offset=%d size=%d"
+ " remaining_data_length=%d\n",
+ i, j*max_iov_size, size, remaining_data_length);
+ rc = smbd_post_send_page(
+ info, rqst->rq_pages[i], j*max_iov_size,
+ size, remaining_data_length);
+ if (rc)
+ goto done;
+ }
+ }
+
+done:
+ /*
+ * As an optimization, we don't wait for individual I/O to finish
+ * before sending the next one.
+ * Send them all and wait for pending send count to get to 0
+ * that means all the I/Os have been out and we are good to return
+ */
+
+ wait_event(info->wait_send_payload_pending,
+ atomic_read(&info->send_payload_pending) == 0);
+
+ info->smbd_send_pending--;
+ wake_up(&info->wait_smbd_send_pending);
+ profiling_add_histogram(rdtsc()-t1, info->smbd_write_cycles);
+
+ return rc;
+}
diff --git a/fs/cifs/smbdirect.h b/fs/cifs/smbdirect.h
index 26614fa..e9bd938 100644
--- a/fs/cifs/smbdirect.h
+++ b/fs/cifs/smbdirect.h
@@ -89,6 +89,9 @@ struct smbd_connection {
/* Activity accoutning */
/* Pending reqeusts issued from upper layer */
+ int smbd_send_pending;
+ wait_queue_head_t wait_smbd_send_pending;
+
int smbd_recv_pending;
wait_queue_head_t wait_smbd_recv_pending;
@@ -260,6 +263,7 @@ void smbd_destroy(struct smbd_connection *info);
/* Interface for carrying upper layer I/O through send/recv */
int smbd_recv(struct smbd_connection *info, struct msghdr *msg);
+int smbd_send(struct smbd_connection *info, struct smb_rqst *rqst);
void profiling_display_histogram(
struct seq_file *m, unsigned long long array[]);
--
2.7.4
Powered by blists - more mailing lists