[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1506956528.3410.3.camel@iis-extern.fraunhofer.de>
Date: Mon, 2 Oct 2017 15:02:09 +0000
From: "Stahl, Manuel" <manuel.stahl@...-extern.fraunhofer.de>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"devel@...verdev.osuosl.org" <devel@...verdev.osuosl.org>
Subject: [PATCH] Add new uio device for PCI with dynamic memory allocation
This device combines the uio_pci_generic driver and the uio_dmem_genirq
driver since PCI uses a slightly different API for interrupts.
A fixed number of DMA capable memory regions can be defined using the
module parameter "dmem_sizes". The memory is not allocated until the uio
device file is opened for the first time. When the device file is closed,
the allocated memory block is freed. Physical (DMA) addresses for the
dynamic regions are provided to the userspace via
/sys/class/uio/uioX/maps/mapY/addr in the same way as static addresses are
when the uio device file is open, when no processes are holding the device
file open, the address returned to userspace is DMA_ERROR_CODE.
Signed-off-by: Manuel Stahl <manuel.stahl@....fraunhofer.de>
---
MAINTAINERS | 6 +
drivers/uio/Kconfig | 9 +
drivers/uio/Makefile | 1 +
drivers/uio/uio_pci_dmem_genirq.c | 357 ++++++++++++++++++++++++++++++++++++++
4 files changed, 373 insertions(+)
create mode 100644 drivers/uio/uio_pci_dmem_genirq.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 65b0c88d5ee0..e135c171f88b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5801,6 +5801,12 @@ L: kvm@...r.kernel.org
S: Supported
F: drivers/uio/uio_pci_generic.c
+GENERIC UIO DRIVER FOR PCI DEVICES WITH DMA
+M: "Manuel Stahl" <manuel.stahl@....fraunhofer.de>
+L: kvm@...r.kernel.org
+S: Supported
+F: drivers/uio/uio_pci_dmem_genirq.c
+
GENWQE (IBM Generic Workqueue Card)
M: Frank Haverkamp <haver@...ux.vnet.ibm.com>
M: Guilherme G. Piccoli <gpiccoli@...ux.vnet.ibm.com>
diff --git a/drivers/uio/Kconfig b/drivers/uio/Kconfig
index 7e8dc78a9796..30ca4d405378 100644
--- a/drivers/uio/Kconfig
+++ b/drivers/uio/Kconfig
@@ -93,6 +93,15 @@ config UIO_PCI_GENERIC
primarily, for virtualization scenarios.
If you compile this as a module, it will be called uio_pci_generic.
+config UIO_PCI_DMEM_GENIRQ
+ tristate "Generic driver for PCI 2.3 and PCI Express cards with DMA"
+ depends on PCI
+ help
+ Generic driver that you can bind, dynamically, to any
+ PCI 2.3 compliant and PCI Express card. It is useful
+ for FPGAs with DMA capability connected via PCI.
+ If you compile this as a module, it will be called uio_pci_dmem_genirq.
+
config UIO_NETX
tristate "Hilscher NetX Card driver"
depends on PCI
diff --git a/drivers/uio/Makefile b/drivers/uio/Makefile
index e9663bb8a4c7..6c010c26695d 100644
--- a/drivers/uio/Makefile
+++ b/drivers/uio/Makefile
@@ -5,6 +5,7 @@ obj-$(CONFIG_UIO_DMEM_GENIRQ) += uio_dmem_genirq.o
obj-$(CONFIG_UIO_AEC) += uio_aec.o
obj-$(CONFIG_UIO_SERCOS3) += uio_sercos3.o
obj-$(CONFIG_UIO_PCI_GENERIC) += uio_pci_generic.o
+obj-$(CONFIG_UIO_PCI_DMEM_GENIRQ) += uio_pci_dmem_genirq.o
obj-$(CONFIG_UIO_NETX) += uio_netx.o
obj-$(CONFIG_UIO_PRUSS) += uio_pruss.o
obj-$(CONFIG_UIO_MF624) += uio_mf624.o
diff --git a/drivers/uio/uio_pci_dmem_genirq.c b/drivers/uio/uio_pci_dmem_genirq.c
new file mode 100644
index 000000000000..989807029137
--- /dev/null
+++ b/drivers/uio/uio_pci_dmem_genirq.c
@@ -0,0 +1,357 @@
+/* uio_pci_generic - generic UIO driver for PCI 2.3 devices with DMA memory
+ *
+ * Copyright (C) 2016 Fraunhofer IIS
+ * Author: Manuel Stahl <manuel.stahl@....fraunhofer.de>
+ *
+ * Based on uio_pci_generic.c by Michael S. Tsirkin
+ * and uio_dmem_genirq.c by Damian Hobson-Garcia.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.
+ *
+ * Since the driver does not declare any device ids, you must allocate
+ * id and bind the device to the driver yourself. For example:
+ *
+ * # echo "8086 10f5" > /sys/bus/pci/drivers/uio_pci_dmem_genirq/new_id
+ * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/e1000e/unbind
+ * # echo -n 0000:00:19.0 > /sys/bus/pci/drivers/uio_pci_dmem_genirq/bind
+ * # ls -l /sys/bus/pci/devices/0000:00:19.0/driver
+ * .../0000:00:19.0/driver -> ../../../bus/pci/drivers/uio_pci_dmem_genirq
+ *
+ * Or use a modprobe alias:
+ * # alias pci:v000010EEd00001000sv*sd*sc*i* uio_pci_dmem_genirq
+ *
+ * Driver won't bind to devices which do not support the Interrupt Disable Bit
+ * in the command register. All devices compliant to PCI 2.3 (circa 2002) and
+ * all compliant PCI Express devices should support this bit.
+ *
+ * The DMA mask bits and sizes of dynamic regions are derived from module
+ * parameters.
+ *
+ * The format for specifying dynamic region sizes in module parameters
+ * is as follows:
+ *
+ * uio_pci_dmem_genirq.dmem_sizes := <uio_dmem_sizes_def>[;<uio_dmem_sizes_def>]
+ * <uio_dmem_sizes_def> := <pci_id>:<size>[,<size>]
+ * <pci_id> := <vendor>:<device>
+ * <size> := standard linux memsize
+ *
+ * Examples:
+ *
+ * 1) UIO dmem device with 3 dynamic regions:
+ * uio_pci_dmem_genirq.dmem_sizes=8086:10f5:4K,16K,4M
+ *
+ * 2) Two UIO dmem devices with different number of dynamic regions:
+ * uio_pci_dmem_genirq.dmem_sizes=8086:10f5:4K,16K,4M;1234:0001:8K
+ */
+
+#include <linux/device.h>
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/slab.h>
+#include <linux/uio_driver.h>
+#include <linux/bitops.h>
+#include <linux/interrupt.h>
+#include <linux/stringify.h>
+#include <linux/dma-mapping.h>
+
+#define DRIVER_VERSION "0.01.0"
+#define DRIVER_AUTHOR "Manuel Stahl <manuel.stahl@....fraunhofer.de>"
+#define DRIVER_DESC "Generic UIO driver for PCI 2.3 devices with DMA memory"
+#define DRIVER_NAME "uio_pci_dmem_genirq"
+#define DMEM_MAP_ERROR (~0)
+
+struct uio_pci_dmem_dev {
+ struct uio_info info;
+ struct pci_dev *pdev;
+ void *dmem_region_vaddr[MAX_UIO_MAPS];
+ unsigned int refcnt;
+ struct mutex alloc_lock; /* mutex for dmem_region_vaddr and refcnt */
+};
+
+static inline struct uio_pci_dmem_dev *
+to_uio_pci_dmem_dev(struct uio_info *info)
+{
+ return container_of(info, struct uio_pci_dmem_dev, info);
+}
+
+static int open(struct uio_info *info, struct inode *inode)
+{
+ struct uio_pci_dmem_dev *priv = to_uio_pci_dmem_dev(info);
+ struct uio_mem *uiomem;
+ int ret = 0;
+ int dmem_region = 0;
+
+ uiomem = &priv->info.mem[dmem_region];
+
+ mutex_lock(&priv->alloc_lock);
+ while (!priv->refcnt && uiomem < &priv->info.mem[MAX_UIO_MAPS]) {
+ void *addr;
+
+ if (!uiomem->size)
+ break;
+
+ addr = dma_alloc_coherent(&priv->pdev->dev, uiomem->size,
+ (dma_addr_t *)&uiomem->addr,
+ GFP_KERNEL);
+ if (!addr)
+ uiomem->addr = DMEM_MAP_ERROR;
+
+ priv->dmem_region_vaddr[dmem_region++] = addr;
+ ++uiomem;
+ }
+ if (pci_check_and_mask_intx(priv->pdev))
+ dev_info(&priv->pdev->dev, "Found pending interrupt");
+
+ if (!priv->refcnt)
+ pci_set_master(priv->pdev);
+
+ priv->refcnt++;
+
+ mutex_unlock(&priv->alloc_lock);
+
+ return ret;
+}
+
+static int release(struct uio_info *info, struct inode *inode)
+{
+ struct uio_pci_dmem_dev *priv = to_uio_pci_dmem_dev(info);
+ struct uio_mem *uiomem;
+ int dmem_region = 0;
+
+ uiomem = &priv->info.mem[dmem_region];
+
+ mutex_lock(&priv->alloc_lock);
+
+ priv->refcnt--;
+ while (!priv->refcnt && uiomem < &priv->info.mem[MAX_UIO_MAPS]) {
+ if (!uiomem->size)
+ break;
+ if (priv->dmem_region_vaddr[dmem_region]) {
+ dma_free_coherent(&priv->pdev->dev, uiomem->size,
+ priv->dmem_region_vaddr[dmem_region],
+ uiomem->addr);
+ }
+ uiomem->addr = DMEM_MAP_ERROR;
+ ++dmem_region;
+ ++uiomem;
+ }
+ if (pci_check_and_mask_intx(priv->pdev))
+ dev_info(&priv->pdev->dev, "Found pending interrupt");
+
+ if (!priv->refcnt)
+ pci_clear_master(priv->pdev);
+
+ mutex_unlock(&priv->alloc_lock);
+ return 0;
+}
+
+static int dmem_mmap(struct uio_info *info, struct vm_area_struct *vma)
+{
+ struct uio_pci_dmem_dev *gdev = to_uio_pci_dmem_dev(info->priv);
+ struct uio_mem *uiomem;
+ int mi = vma->vm_pgoff;
+
+ if (mi >= MAX_UIO_MAPS)
+ return -EINVAL;
+
+ uiomem = &info->mem[mi];
+ if (uiomem->memtype != UIO_MEM_PHYS)
+ return -EINVAL;
+ if (!uiomem->size)
+ return -EINVAL;
+
+ /* DMA address */
+ vma->vm_pgoff = 0;
+ return dma_mmap_coherent(&gdev->pdev->dev, vma,
+ gdev->dmem_region_vaddr[mi],
+ uiomem->addr, uiomem->size);
+}
+
+/* Interrupt handler. Read/modify/write the command register to disable the
+ * interrupt.
+ */
+static irqreturn_t irqhandler(int irq, struct uio_info *info)
+{
+ struct uio_pci_dmem_dev *gdev = to_uio_pci_dmem_dev(info);
+
+ if (gdev->pdev->msi_enabled)
+ return IRQ_HANDLED;
+
+ if (pci_check_and_mask_intx(gdev->pdev))
+ return IRQ_HANDLED;
+
+ return IRQ_NONE;
+}
+
+static unsigned int uio_dmem_dma_bits = 32;
+static char uio_dmem_sizes[256];
+
+static int parse_dmem_entries(struct pci_dev *pdev,
+ const struct pci_device_id *id,
+ struct uio_pci_dmem_dev *gdev)
+{
+ int ret;
+ u32 regions = 0;
+ u32 vendor, device;
+ char *s, *tok, *sizes = NULL;
+ unsigned long long size;
+ struct uio_mem *uiomem;
+ char * const buf = kstrdup(uio_dmem_sizes, GFP_KERNEL);
+
+ if (!buf) {
+ ret = -ENOMEM;
+ return ret;
+ }
+
+ /* Find-out start and end of sizes list */
+ s = buf;
+ while (*s != '\0') {
+ sizes = NULL;
+ tok = strsep(&s, ":");
+ if (!tok)
+ break;
+ ret = kstrtou32(tok, 16, &vendor);
+ if (ret)
+ break;
+ tok = strsep(&s, ":");
+ if (!tok)
+ break;
+ ret = kstrtou32(tok, 16, &device);
+ if (ret)
+ break;
+ sizes = strsep(&s, ";");
+ if (vendor == id->vendor && device == id->device)
+ break;
+ }
+
+ memset(gdev->info.mem, 0, sizeof(gdev->info.mem));
+ if (sizes) {
+ dev_info(&pdev->dev, "Regions: %s\n", sizes);
+
+ /* Parse dynamic regions from sizes list */
+ regions = 0;
+ size = 0;
+ s = sizes;
+ while (s && (regions < MAX_UIO_MAPS)) {
+ tok = strsep(&s, ",");
+ if (!tok)
+ break;
+
+ size = memparse(tok, NULL);
+ if (size) {
+ uiomem = &gdev->info.mem[regions];
+ uiomem->memtype = UIO_MEM_PHYS;
+ /* Will be allocated in open() call */
+ uiomem->addr = DMEM_MAP_ERROR;
+ uiomem->size = size;
+ regions++;
+ }
+ }
+ if (s)
+ dev_warn(&pdev->dev, "device has more than "
+ __stringify(MAX_UIO_MAPS)
+ " dynamic memory regions.\n");
+ }
+ dev_info(&pdev->dev, "Found %d regions\n", regions);
+
+ kfree(buf);
+ return ret;
+}
+
+static int probe(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ struct uio_pci_dmem_dev *gdev;
+ int err;
+
+ dev_info(&pdev->dev, "Probe %s for %04x:%04x\n", DRIVER_NAME,
+ id->vendor, id->device);
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ dev_err(&pdev->dev, "%s: pci_enable_device failed: %d\n",
+ __func__, err);
+ return err;
+ }
+
+ dev_info(&pdev->dev, "Legacy IRQ: %i", pdev->irq);
+ /* Try to use MSI interrupts */
+ pci_enable_msi_range(pdev, 1, 1);
+ if (pdev->irq && !pci_intx_mask_supported(pdev)) {
+ err = -ENODEV;
+ goto err_disable_pci;
+ }
+
+ gdev = kzalloc(sizeof(*gdev), GFP_KERNEL);
+ if (!gdev) {
+ err = -ENOMEM;
+ goto err_disable_pci;
+ }
+
+ gdev->info.name = DRIVER_NAME;
+ gdev->info.version = DRIVER_VERSION;
+ gdev->info.irq = pdev->irq;
+ gdev->info.irq_flags = IRQF_SHARED;
+ gdev->info.handler = irqhandler;
+ gdev->info.open = open;
+ gdev->info.release = release;
+ gdev->info.mmap = dmem_mmap;
+ gdev->info.priv = gdev;
+ gdev->pdev = pdev;
+
+ /* Set DMA coherent mask */
+ if (uio_dmem_dma_bits > 64)
+ uio_dmem_dma_bits = 64;
+ err = dma_set_coherent_mask(&pdev->dev,
+ DMA_BIT_MASK(uio_dmem_dma_bits));
+ if (err) {
+ dev_err(&pdev->dev, "Unable to dma_set_coherent_mask\n");
+ goto err_free_gdev;
+ }
+
+ err = parse_dmem_entries(pdev, id, gdev);
+ if (err)
+ goto err_free_gdev;
+
+ mutex_init(&gdev->alloc_lock);
+
+ if (uio_register_device(&pdev->dev, &gdev->info))
+ goto err_free_gdev;
+ pci_set_drvdata(pdev, gdev);
+
+ return 0;
+err_free_gdev:
+ kfree(gdev);
+err_disable_pci:
+ pci_disable_msi(pdev);
+ pci_disable_device(pdev);
+ return err;
+}
+
+static void remove(struct pci_dev *pdev)
+{
+ struct uio_pci_dmem_dev *gdev = pci_get_drvdata(pdev);
+
+ uio_unregister_device(&gdev->info);
+ pci_disable_msi(pdev);
+ pci_disable_device(pdev);
+ kfree(gdev);
+}
+
+static struct pci_driver uio_pci_driver = {
+ .name = DRIVER_NAME,
+ .id_table = NULL, /* only dynamic id's */
+ .probe = probe,
+ .remove = remove,
+};
+
+module_pci_driver(uio_pci_driver);
+
+module_param_named(dmem_dma_bits, uio_dmem_dma_bits, uint, 0444);
+MODULE_PARM_DESC(dmem_dma_bits, "Number of bits in DMA mask");
+module_param_string(dmem_sizes, uio_dmem_sizes, 256, 0444);
+MODULE_PARM_DESC(dmem_sizes, "Comma separated dynamic region sizes; e.g. 8086:10f5:4K,16K,4M;1234:0001:8K");
+
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR(DRIVER_AUTHOR);
+MODULE_DESCRIPTION(DRIVER_DESC);
--
2.11.0
Powered by blists - more mailing lists