| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <c194e5c4-2042-bf94-a2d8-7aa13756e257@infradead.org>
Date: Mon, 2 Oct 2017 10:48:23 -0700
From: Randy Dunlap <rdunlap@...radead.org>
To: LKML <linux-kernel@...r.kernel.org>,
Linus Torvalds <torvalds@...ux-foundation.org>,
Andrew Morton <akpm@...ux-foundation.org>
Cc: Kees Cook <keescook@...omium.org>,
Luis Rodriguez <mcgrof@...nel.org>,
Dave Hansen <dave.hansen@...el.com>
Subject: [PATCH] Kernel hacking menu: Runtime testing: keep tests together
From: Randy Dunlap <rdunlap@...radead.org>
Expand the "Runtime testing" menu by including more entries inside
it instead of after it. This is just Kconfig symbol movement.
This causes the (arch-independent) Runtime tests to be presented
(listed) all in one place instead of in multiple places.
Signed-off-by: Randy Dunlap <rdunlap@...radead.org>
Cc: Kees Cook <keescook@...omium.org>
Cc: Dave Hansen <dave.hansen@...el.com>
Cc: "Luis R. Rodriguez" <mcgrof@...nel.org>
---
lib/Kconfig.debug | 143 +++++++++++++++++++++-----------------------
1 file changed, 71 insertions(+), 72 deletions(-)
--- lnx-414-rc3.orig/lib/Kconfig.debug
+++ lnx-414-rc3/lib/Kconfig.debug
@@ -1590,6 +1590,54 @@ config LATENCYTOP
source kernel/trace/Kconfig
+config PROVIDE_OHCI1394_DMA_INIT
+ bool "Remote debugging over FireWire early on boot"
+ depends on PCI && X86
+ help
+ If you want to debug problems which hang or crash the kernel early
+ on boot and the crashing machine has a FireWire port, you can use
+ this feature to remotely access the memory of the crashed machine
+ over FireWire. This employs remote DMA as part of the OHCI1394
+ specification which is now the standard for FireWire controllers.
+
+ With remote DMA, you can monitor the printk buffer remotely using
+ firescope and access all memory below 4GB using fireproxy from gdb.
+ Even controlling a kernel debugger is possible using remote DMA.
+
+ Usage:
+
+ If ohci1394_dma=early is used as boot parameter, it will initialize
+ all OHCI1394 controllers which are found in the PCI config space.
+
+ As all changes to the FireWire bus such as enabling and disabling
+ devices cause a bus reset and thereby disable remote DMA for all
+ devices, be sure to have the cable plugged and FireWire enabled on
+ the debugging host before booting the debug target for debugging.
+
+ This code (~1k) is freed after boot. By then, the firewire stack
+ in charge of the OHCI-1394 controllers should be used instead.
+
+ See Documentation/debugging-via-ohci1394.txt for more information.
+
+config DMA_API_DEBUG
+ bool "Enable debugging of DMA-API usage"
+ depends on HAVE_DMA_API_DEBUG
+ help
+ Enable this option to debug the use of the DMA API by device drivers.
+ With this option you will be able to detect common bugs in device
+ drivers like double-freeing of DMA mappings or freeing mappings that
+ were never allocated.
+
+ This also attempts to catch cases where a page owned by DMA is
+ accessed by the cpu in a way that could cause data corruption. For
+ example, this enables cow_user_page() to check that the source page is
+ not undergoing DMA.
+
+ This option causes a performance degradation. Use only if you want to
+ debug device drivers and dma interactions.
+
+ If unsure, say N.
+
menu "Runtime Testing"
config LKDTM
@@ -1749,56 +1797,6 @@ config TEST_PARMAN
If unsure, say N.
-endmenu # runtime tests
-
-config PROVIDE_OHCI1394_DMA_INIT
- bool "Remote debugging over FireWire early on boot"
- depends on PCI && X86
- help
- If you want to debug problems which hang or crash the kernel early
- on boot and the crashing machine has a FireWire port, you can use
- this feature to remotely access the memory of the crashed machine
- over FireWire. This employs remote DMA as part of the OHCI1394
- specification which is now the standard for FireWire controllers.
-
- With remote DMA, you can monitor the printk buffer remotely using
- firescope and access all memory below 4GB using fireproxy from gdb.
- Even controlling a kernel debugger is possible using remote DMA.
-
- Usage:
-
- If ohci1394_dma=early is used as boot parameter, it will initialize
- all OHCI1394 controllers which are found in the PCI config space.
-
- As all changes to the FireWire bus such as enabling and disabling
- devices cause a bus reset and thereby disable remote DMA for all
- devices, be sure to have the cable plugged and FireWire enabled on
- the debugging host before booting the debug target for debugging.
-
- This code (~1k) is freed after boot. By then, the firewire stack
- in charge of the OHCI-1394 controllers should be used instead.
-
- See Documentation/debugging-via-ohci1394.txt for more information.
-
-config DMA_API_DEBUG
- bool "Enable debugging of DMA-API usage"
- depends on HAVE_DMA_API_DEBUG
- help
- Enable this option to debug the use of the DMA API by device drivers.
- With this option you will be able to detect common bugs in device
- drivers like double-freeing of DMA mappings or freeing mappings that
- were never allocated.
-
- This also attempts to catch cases where a page owned by DMA is
- accessed by the cpu in a way that could cause data corruption. For
- example, this enables cow_user_page() to check that the source page is
- not undergoing DMA.
-
- This option causes a performance degradation. Use only if you want to
- debug device drivers and dma interactions.
-
- If unsure, say N.
-
config TEST_LKM
tristate "Test module loading with 'hello world' module"
default n
@@ -1873,18 +1871,6 @@ config TEST_UDELAY
If unsure, say N.
-config MEMTEST
- bool "Memtest"
- depends on HAVE_MEMBLOCK
- ---help---
- This option adds a kernel parameter 'memtest', which allows memtest
- to be set.
- memtest=0, mean disabled; -- default
- memtest=1, mean do 1 test pattern;
- ...
- memtest=17, mean do 17 test patterns.
- If you are unsure how to answer this question, answer N.
-
config TEST_STATIC_KEYS
tristate "Test static keys"
default n
@@ -1894,16 +1880,6 @@ config TEST_STATIC_KEYS
If unsure, say N.
-config BUG_ON_DATA_CORRUPTION
- bool "Trigger a BUG when data corruption is detected"
- select DEBUG_LIST
- help
- Select this option if the kernel should BUG when it encounters
- data corruption in kernel memory structures when they get checked
- for validity.
-
- If unsure, say N.
-
config TEST_KMOD
tristate "kmod stress tester"
default n
@@ -1941,6 +1917,29 @@ config TEST_DEBUG_VIRTUAL
If unsure, say N.
+endmenu # runtime tests
+
+config MEMTEST
+ bool "Memtest"
+ depends on HAVE_MEMBLOCK
+ ---help---
+ This option adds a kernel parameter 'memtest', which allows memtest
+ to be set.
+ memtest=0, mean disabled; -- default
+ memtest=1, mean do 1 test pattern;
+ ...
+ memtest=17, mean do 17 test patterns.
+ If you are unsure how to answer this question, answer N.
+
+config BUG_ON_DATA_CORRUPTION
+ bool "Trigger a BUG when data corruption is detected"
+ select DEBUG_LIST
+ help
+ Select this option if the kernel should BUG when it encounters
+ data corruption in kernel memory structures when they get checked
+ for validity.
+
+ If unsure, say N.
source "samples/Kconfig"
Powered by blists - more mailing lists