| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <3105781.uZB2mYxEDh@amdc3058>
Date: Tue, 03 Oct 2017 13:59:07 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: "David S. Miller" <davem@...emloft.net>
Cc: Guenter Roeck <linux@...ck-us.net>,
Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Richard Henderson <rth@...ddle.net>,
Ivan Kokshaysky <ink@...assic.park.msu.ru>,
Matt Turner <mattst88@...il.com>, linux-ide@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] ide: pci: free PCI BARs on initialization failure
Recent pci_assign_irq() changes uncovered a problem with missing
freeing of PCI BARs on PCI IDE host initialization failure:
ide0: disabled, no IRQ
ide0: failed to initialize IDE interface
ide0: disabling port
cmd64x 0000:00:02.0: IDE controller (0x1095:0x0646 rev 0x07)
CMD64x_IDE 0000:00:02.0: BAR 0: can't reserve [io 0x8050-0x8057]
cmd64x 0000:00:02.0: can't reserve resources
CMD64x_IDE: probe of 0000:00:02.0 failed with error -16
Fix the problem by adding missing freeing of PCI BARs to
ide_setup_pci_controller() and ide_pci_init_two().
Link: http://lkml.kernel.org/r/32ec730f-c1b0-5584-cd35-f8a809122b96@roeck-us.net
Reported-by: Guenter Roeck <linux@...ck-us.net>
Cc: Bjorn Helgaas <bhelgaas@...gle.com>
Cc: Richard Henderson <rth@...ddle.net>
Cc: Ivan Kokshaysky <ink@...assic.park.msu.ru>
Cc: Guenter Roeck <linux@...ck-us.net>
Cc: Matt Turner <mattst88@...il.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
This should fix problem with reserving PCI resources on a secondary
PCI device probe attempt (please test when pci_assign_irq() fix is
not present and "[PATCH] ide: add missing hwif->portdev freeing on
hwif_init() failure" is applied).
drivers/ide/setup-pci.c | 61 +++++++++++++++++++++++++++++-------------------
1 file changed, 38 insertions(+), 23 deletions(-)
Index: b/drivers/ide/setup-pci.c
===================================================================
--- a/drivers/ide/setup-pci.c 2017-10-03 13:43:29.567778114 +0200
+++ b/drivers/ide/setup-pci.c 2017-10-03 13:43:54.131778138 +0200
@@ -179,6 +179,7 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
/**
* ide_pci_enable - do PCI enables
* @dev: PCI device
+ * @bars: PCI BARs mask
* @d: IDE port info
*
* Enable the IDE PCI device. We attempt to enable the device in full
@@ -189,9 +190,10 @@ EXPORT_SYMBOL_GPL(ide_setup_pci_noise);
* Returns zero on success or an error code
*/
-static int ide_pci_enable(struct pci_dev *dev, const struct ide_port_info *d)
+static int ide_pci_enable(struct pci_dev *dev, int bars,
+ const struct ide_port_info *d)
{
- int ret, bars;
+ int ret;
if (pci_enable_device(dev)) {
ret = pci_enable_device_io(dev);
@@ -216,18 +218,6 @@ static int ide_pci_enable(struct pci_dev
goto out;
}
- if (d->host_flags & IDE_HFLAG_SINGLE)
- bars = (1 << 2) - 1;
- else
- bars = (1 << 4) - 1;
-
- if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
- if (d->host_flags & IDE_HFLAG_CS5520)
- bars |= (1 << 2);
- else
- bars |= (1 << 4);
- }
-
ret = pci_request_selected_regions(dev, bars, d->name);
if (ret < 0)
printk(KERN_ERR "%s %s: can't reserve resources\n",
@@ -403,6 +393,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif,
/**
* ide_setup_pci_controller - set up IDE PCI
* @dev: PCI device
+ * @bars: PCI BARs mask
* @d: IDE port info
* @noisy: verbose flag
*
@@ -411,7 +402,7 @@ int ide_hwif_setup_dma(ide_hwif_t *hwif,
* and enables it if need be
*/
-static int ide_setup_pci_controller(struct pci_dev *dev,
+static int ide_setup_pci_controller(struct pci_dev *dev, int bars,
const struct ide_port_info *d, int noisy)
{
int ret;
@@ -420,7 +411,7 @@ static int ide_setup_pci_controller(stru
if (noisy)
ide_setup_pci_noise(dev, d);
- ret = ide_pci_enable(dev, d);
+ ret = ide_pci_enable(dev, bars, d);
if (ret < 0)
goto out;
@@ -428,16 +419,18 @@ static int ide_setup_pci_controller(stru
if (ret < 0) {
printk(KERN_ERR "%s %s: error accessing PCI regs\n",
d->name, pci_name(dev));
- goto out;
+ goto out_free_bars;
}
if (!(pcicmd & PCI_COMMAND_IO)) { /* is device disabled? */
ret = ide_pci_configure(dev, d);
if (ret < 0)
- goto out;
+ goto out_free_bars;
printk(KERN_INFO "%s %s: device enabled (Linux)\n",
d->name, pci_name(dev));
}
+out_free_bars:
+ pci_release_selected_regions(dev, bars);
out:
return ret;
}
@@ -540,13 +533,28 @@ int ide_pci_init_two(struct pci_dev *dev
{
struct pci_dev *pdev[] = { dev1, dev2 };
struct ide_host *host;
- int ret, i, n_ports = dev2 ? 4 : 2;
+ int ret, i, n_ports = dev2 ? 4 : 2, bars;
struct ide_hw hw[4], *hws[] = { NULL, NULL, NULL, NULL };
+ if (d->host_flags & IDE_HFLAG_SINGLE)
+ bars = (1 << 2) - 1;
+ else
+ bars = (1 << 4) - 1;
+
+ if ((d->host_flags & IDE_HFLAG_NO_DMA) == 0) {
+ if (d->host_flags & IDE_HFLAG_CS5520)
+ bars |= (1 << 2);
+ else
+ bars |= (1 << 4);
+ }
+
for (i = 0; i < n_ports / 2; i++) {
- ret = ide_setup_pci_controller(pdev[i], d, !i);
- if (ret < 0)
+ ret = ide_setup_pci_controller(pdev[i], bars, d, !i);
+ if (ret < 0) {
+ if (i == 1)
+ pci_release_selected_regions(pdev[0], bars);
goto out;
+ }
ide_pci_setup_ports(pdev[i], d, &hw[i*2], &hws[i*2]);
}
@@ -554,7 +562,7 @@ int ide_pci_init_two(struct pci_dev *dev
host = ide_host_alloc(d, hws, n_ports);
if (host == NULL) {
ret = -ENOMEM;
- goto out;
+ goto out_free_bars;
}
host->dev[0] = &dev1->dev;
@@ -576,7 +584,7 @@ int ide_pci_init_two(struct pci_dev *dev
* do_ide_setup_pci_device() on the first device!
*/
if (ret < 0)
- goto out;
+ goto out_free_bars;
/* fixup IRQ */
if (ide_pci_is_in_compatibility_mode(pdev[i])) {
@@ -589,6 +597,13 @@ int ide_pci_init_two(struct pci_dev *dev
ret = ide_host_register(host, d, hws);
if (ret)
ide_host_free(host);
+ else
+ goto out;
+
+out_free_bars:
+ i = n_ports / 2;
+ while (i--)
+ pci_release_selected_regions(pdev[i], bars);
out:
return ret;
}
Powered by blists - more mailing lists