linux-kernel - [PATCH v3 0/4] additional TPM performance improvements

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20171004102924.12355-1-nayna@linux.vnet.ibm.com>
Date:   Wed,  4 Oct 2017 06:29:19 -0400
From:   Nayna Jain <nayna@...ux.vnet.ibm.com>
To:     linux-integrity@...r.kernel.org
Cc:     zohar@...ux.vnet.ibm.com, linux-security-module@...r.kernel.org,
        linux-kernel@...r.kernel.org, peterhuewe@....de,
        jarkko.sakkinen@...ux.intel.com, tpmdd@...horst.net,
        jgunthorpe@...idianresearch.com, patrickc@...ibm.com,
        Nayna Jain <nayna@...ux.vnet.ibm.com>
Subject: [PATCH v3 0/4] additional TPM performance improvements 

After further discussions with the TCG Device Driver working group (ddwg),
the following changes were made: 

* Check for burstcount at least once to confirm the TPM is ready to accept
the data. Similarly, query for the TPM Expect status as sanity check at
the end.

* Make the sleep for status check in the loop less than 5msec.

* Make the sleep in the loop while querying for burstcount less than
5msec.

Below is the list of patches along with the performance improvements
seen with a TPM 1.2 with an 8 byte burstcount for 1000 extends: 

Patch                                        |Improvement(time in sec)

tpm: ignore burstcount to improve tpm_tis    | ~41 - ~14
send() performance.

tpm: reduce polling delay in tpm_tis         | ~14 - ~10
wait_for_tpm_stat()

tpm: reduce tpm_msleep() time in             | ~10 - ~9
get_burstcount()

tpm: modify tpm_msleep() function to have    | ~9 - ~8
max range

Changelog v3:

* Include Jarkko's feedback to move wait_for_tpm_stat() from
tpm-interface.c to respective driver files tpm_tis_core.c and
xen-tpmfront.c.
* Remove use of module parameter ignore_burst_count and is
now alwaysed ignored in tpm tis send() operation.
* Reduce sleep() time during polling in wait_for_tpm_stat() from
5msec to 1msec for both recv() and send() operation. Version
2 of the patches  had it only for send() operation.

Changelog v2:

* Add module parameter to handle ignoring of burst count during
tpm tis send() operation.
* Add improvements over sleep time to reduce delays.

Nayna Jain (5):
  tpm: move wait_for_tpm_stat() to respective driver files
  tpm: ignore burstcount to improve tpm_tis send() performance
  tpm: reduce polling delay in tpm_tis wait_for_tpm_stat()
  tpm: reduce tpm_msleep() time in get_burstcount()
  tpm: use tpm_msleep() value as max delay

 drivers/char/tpm/tpm-interface.c |  60 ----------------------
 drivers/char/tpm/tpm.h           |   6 +--
 drivers/char/tpm/tpm_tis_core.c  | 106 +++++++++++++++++++++++++++++----------
 drivers/char/tpm/xen-tpmfront.c  |  60 ++++++++++++++++++++++
 4 files changed, 141 insertions(+), 91 deletions(-)

-- 
2.13.3