[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171004105018.oxwhialssxh62sv3@dell>
Date: Wed, 4 Oct 2017 11:50:18 +0100
From: Lee Jones <lee.jones@...aro.org>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Mark Brown <broonie@...nel.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
Quentin Schulz <quentin.schulz@...e-electrons.com>
Subject: Re: [PATCH 2/7] regulator: axp20x: Add support for AXP813 regulators
On Fri, 29 Sep 2017, Chen-Yu Tsai wrote:
> The AXP813 PMIC has 7 DC-DC buck regulators, 16 LDOs (including the
> fixed RTC LDO and 2 GPIO LDOs), and 1 switchable. The drive-vbus
> feature is also supported. All the hardware details are very similar
> to the AXP803, with the following exceptions:
>
> - Extra DCDC7 buck regulator, with the same range as DCDC6
>
> - SWitch now has a separate supply pin, instead of being chained
> internaly from DCDC1
>
> - RTC LDO output voltage is now 1.8V
>
> - FLDO3 is an LDO with switchable supplies, but unconfigurable output
> voltage. The voltage is always half that of its supply.
>
> Support for FLDO3 is currently unimplemented, as it requires runtime
> switching of its supplies, something the regulator subsystem does not
> support. It is not used in either the reference designs nor actually
> produced boards available.
>
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
> Tested-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
> ---
> drivers/regulator/axp20x-regulator.c | 102 +++++++++++++++++++++++++++++++++--
> include/linux/mfd/axp20x.h | 3 ++
Acked-by: Lee Jones <lee.jones@...aro.org>
> 2 files changed, 101 insertions(+), 4 deletions(-)
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
Powered by blists - more mailing lists