[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <efb84cd6e7d9685042a1dbeb80a5e89ff123cd7e.1507198895.git-series.maxime.ripard@free-electrons.com>
Date: Thu, 5 Oct 2017 12:49:53 +0200
From: Maxime Ripard <maxime.ripard@...e-electrons.com>
To: Chen-Yu Tsai <wens@...e.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>
Cc: linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: [PATCH 18/20] ARM: dts: sun9i: cubieboard4: Remove card detect pull-up
The board has an external pull-up on the card-detect signal, so there's no
need to add another one.
This also removes a DTC warning.
Signed-off-by: Maxime Ripard <maxime.ripard@...e-electrons.com>
---
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 10 +---------
1 file changed, 1 insertion(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
index 15cc82350360..cb337e08adab 100644
--- a/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
+++ b/arch/arm/boot/dts/sun9i-a80-cubieboard4.dts
@@ -85,7 +85,7 @@
&mmc0 {
pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins>, <&mmc0_cd_pin_cubieboard4>;
+ pinctrl-0 = <&mmc0_pins>;
vmmc-supply = <®_dcdc1>;
bus-width = <4>;
cd-gpios = <&pio 7 18 GPIO_ACTIVE_HIGH>; /* PH18 */
@@ -128,14 +128,6 @@
clocks = <&ac100_rtc 0>;
};
-&pio {
- mmc0_cd_pin_cubieboard4: mmc0_cd_pin@0 {
- pins = "PH18";
- function = "gpio_in";
- bias-pull-up;
- };
-};
-
&r_ir {
status = "okay";
};
--
git-series 0.9.1
Powered by blists - more mailing lists