[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <699d043348fdb4053ed7f6f7dafb8512c7d73589.1507220144.git.vilhelm.gray@gmail.com>
Date: Thu, 5 Oct 2017 14:14:38 -0400
From: William Breathitt Gray <vilhelm.gray@...il.com>
To: jic23@...nel.org, benjamin.gaignard@...aro.org, knaack.h@....de,
lars@...afoo.de, pmeerw@...erw.net
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
William Breathitt Gray <vilhelm.gray@...il.com>
Subject: [PATCH v3 5/6] iio: Add dummy counter driver
This patch introduces the dummy counter driver. The dummy counter driver
serves as a reference implementation of a driver that utilizes the
Generic Counter interface.
Writing individual '1' and '0' characters to the Signal attributes
allows a user to simulate a typical Counter Signal input stream for
evaluation; the Counter will evaluate the Signal data based on the
respective trigger mode for the associated Signal, and trigger the
associated counter function specified by the respective function mode.
The current Value value may be read, and the Value value preset by a
write.
Signed-off-by: William Breathitt Gray <vilhelm.gray@...il.com>
---
drivers/iio/counter/Kconfig | 15 ++
drivers/iio/counter/Makefile | 1 +
drivers/iio/counter/dummy-counter.c | 293 ++++++++++++++++++++++++++++++++++++
3 files changed, 309 insertions(+)
create mode 100644 drivers/iio/counter/dummy-counter.c
diff --git a/drivers/iio/counter/Kconfig b/drivers/iio/counter/Kconfig
index c8becfe78e28..494aed40e9c9 100644
--- a/drivers/iio/counter/Kconfig
+++ b/drivers/iio/counter/Kconfig
@@ -22,6 +22,21 @@ config 104_QUAD_8
The base port addresses for the devices may be configured via the base
array module parameter.
+config DUMMY_COUNTER
+ tristate "Dummy counter driver"
+ help
+ Select this option to enable the dummy counter driver. The dummy
+ counter driver serves as a reference implementation of a driver that
+ utilizes the Generic Counter interface.
+
+ Writing individual '1' and '0' characters to the Signal attributes
+ allows a user to simulate a typical Counter Signal input stream for
+ evaluation; the Counter will evaluate the Signal data based on the
+ respective trigger mode for the associated Signal, and trigger the
+ associated counter function specified by the respective function mode.
+ The current Value value may be read, and the Value value preset by a
+ write.
+
config STM32_LPTIMER_CNT
tristate "STM32 LP Timer encoder counter driver"
depends on MFD_STM32_LPTIMER || COMPILE_TEST
diff --git a/drivers/iio/counter/Makefile b/drivers/iio/counter/Makefile
index 1b9a896eb488..8c2ef0115426 100644
--- a/drivers/iio/counter/Makefile
+++ b/drivers/iio/counter/Makefile
@@ -5,4 +5,5 @@
# When adding new entries keep the list in alphabetical order
obj-$(CONFIG_104_QUAD_8) += 104-quad-8.o
+obj-$(CONFIG_DUMMY_COUNTER) += dummy-counter.o
obj-$(CONFIG_STM32_LPTIMER_CNT) += stm32-lptimer-cnt.o
diff --git a/drivers/iio/counter/dummy-counter.c b/drivers/iio/counter/dummy-counter.c
new file mode 100644
index 000000000000..6ecc9854894f
--- /dev/null
+++ b/drivers/iio/counter/dummy-counter.c
@@ -0,0 +1,293 @@
+/*
+ * Dummy counter driver
+ * Copyright (C) 2017 William Breathitt Gray
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License, version 2, as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ */
+#include <linux/device.h>
+#include <linux/errno.h>
+#include <linux/iio/counter.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#define DUMCNT_NUM_COUNTERS 2
+/**
+ * struct dumcnt - private data structure
+ * @counter: instance of the iio_counter
+ * @counts: array of accumulation values
+ * @states: array of input line states
+ */
+struct dumcnt {
+ struct iio_counter counter;
+ unsigned int counts[DUMCNT_NUM_COUNTERS];
+ unsigned int states[DUMCNT_NUM_COUNTERS];
+};
+
+static int dumcnt_signal_read(struct iio_counter *counter,
+ struct iio_counter_signal *signal, int *val, int *val2)
+{
+ struct dumcnt *const priv = counter->driver_data;
+ *val = priv->states[signal->id];
+
+ return IIO_VAL_INT;
+}
+
+static int dumcnt_signal_write(struct iio_counter *counter,
+ struct iio_counter_signal *signal, int val, int val2)
+{
+ struct dumcnt *const priv = counter->driver_data;
+ const unsigned int id = signal->id;
+ const unsigned int prev_state = priv->states[id];
+ struct iio_counter_value *const value = counter->values + id;
+ const unsigned int function_mode = value->mode;
+ const unsigned int trigger_mode = value->triggers[0].mode;
+ unsigned int triggered = 0;
+
+ if (val && val != 1)
+ return -EINVAL;
+
+ /* If no state change then just exit */
+ if (prev_state == val)
+ return 0;
+
+ priv->states[id] = val;
+
+ switch (trigger_mode) {
+ /* "none" case */
+ case 0:
+ return 0;
+ /* "rising edge" case */
+ case 1:
+ if (!prev_state)
+ triggered = 1;
+ break;
+ /* "falling edge" case */
+ case 2:
+ if (prev_state)
+ triggered = 1;
+ break;
+ /* "both edges" case */
+ case 3:
+ triggered = 1;
+ break;
+ }
+
+ /* If counter function triggered */
+ if (triggered)
+ /* "increase" case */
+ if (function_mode)
+ priv->counts[id]++;
+ /* "decrease" case */
+ else
+ priv->counts[id]--;
+
+ return 0;
+}
+
+static int dumcnt_trigger_mode_set(struct iio_counter *counter,
+ struct iio_counter_value *value, struct iio_counter_trigger *trigger,
+ unsigned int mode)
+{
+ if (mode >= trigger->num_trigger_modes)
+ return -EINVAL;
+
+ trigger->mode = mode;
+
+ return 0;
+}
+
+static int dumcnt_trigger_mode_get(struct iio_counter *counter,
+ struct iio_counter_value *value, struct iio_counter_trigger *trigger)
+{
+ return trigger->mode;
+}
+
+static int dumcnt_value_read(struct iio_counter *counter,
+ struct iio_counter_value *value, int *val, int *val2)
+{
+ struct dumcnt *const priv = counter->driver_data;
+
+ *val = priv->counts[value->id];
+
+ return IIO_VAL_INT;
+}
+
+static int dumcnt_value_write(struct iio_counter *counter,
+ struct iio_counter_value *value, int val, int val2)
+{
+ struct dumcnt *const priv = counter->driver_data;
+
+ priv->counts[value->id] = val;
+
+ return 0;
+}
+
+static int dumcnt_value_function_set(struct iio_counter *counter,
+ struct iio_counter_value *value, unsigned int mode)
+{
+ if (mode >= value->num_function_modes)
+ return -EINVAL;
+
+ value->mode = mode;
+
+ return 0;
+}
+
+static int dumcnt_value_function_get(struct iio_counter *counter,
+ struct iio_counter_value *value)
+{
+ return value->mode;
+}
+
+static const struct iio_counter_ops dumcnt_ops = {
+ .signal_read = dumcnt_signal_read,
+ .signal_write = dumcnt_signal_write,
+ .trigger_mode_get = dumcnt_trigger_mode_get,
+ .trigger_mode_set = dumcnt_trigger_mode_set,
+ .value_read = dumcnt_value_read,
+ .value_write = dumcnt_value_write,
+ .value_function_set = dumcnt_value_function_set,
+ .value_function_get = dumcnt_value_function_get
+};
+
+static const char *const dumcnt_function_modes[] = {
+ "decrease",
+ "increase"
+};
+
+#define DUMCNT_SIGNAL(_id, _name) { \
+ .id = _id, \
+ .name = _name \
+}
+
+static const struct iio_counter_signal dumcnt_signals[] = {
+ DUMCNT_SIGNAL(0, "Signal A"), DUMCNT_SIGNAL(1, "Signal B")
+};
+
+#define DUMCNT_VALUE(_id, _name) { \
+ .id = _id, \
+ .name = _name, \
+ .mode = 0, \
+ .function_modes = dumcnt_function_modes, \
+ .num_function_modes = ARRAY_SIZE(dumcnt_function_modes) \
+}
+
+static const struct iio_counter_value dumcnt_values[] = {
+ DUMCNT_VALUE(0, "Count A"), DUMCNT_VALUE(1, "Count B")
+};
+
+static const char *const dumcnt_trigger_modes[] = {
+ "none",
+ "rising edge",
+ "falling edge",
+ "both edges"
+};
+
+static int dumcnt_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct iio_counter_signal *signals;
+ const size_t num_signals = ARRAY_SIZE(dumcnt_signals);
+ struct iio_counter_value *values;
+ const size_t num_values = ARRAY_SIZE(dumcnt_values);
+ struct iio_counter_trigger *triggers;
+ int i;
+ struct dumcnt *dumcnt;
+
+ signals = devm_kmalloc(dev, sizeof(dumcnt_signals), GFP_KERNEL);
+ if (!signals)
+ return -ENOMEM;
+
+ memcpy(signals, dumcnt_signals, sizeof(dumcnt_signals));
+
+ values = devm_kmalloc(dev, sizeof(dumcnt_values), GFP_KERNEL);
+ if (!values)
+ return -ENOMEM;
+
+ memcpy(values, dumcnt_values, sizeof(dumcnt_values));
+
+ /* Associate values with their respective signals */
+ for (i = 0; i < num_values; i++) {
+ triggers = devm_kmalloc(dev, sizeof(*triggers), GFP_KERNEL);
+ if (!triggers)
+ return -ENOMEM;
+
+ triggers->mode = 0;
+ triggers->trigger_modes = dumcnt_trigger_modes;
+ triggers->num_trigger_modes = ARRAY_SIZE(dumcnt_trigger_modes);
+ triggers->signal = &signals[i];
+
+ values[i].triggers = triggers;
+ values[i].num_triggers = 1;
+ }
+
+ dumcnt = devm_kzalloc(dev, sizeof(*dumcnt), GFP_KERNEL);
+ if (!dumcnt)
+ return -ENOMEM;
+
+ dumcnt->counter.name = dev_name(dev);
+ dumcnt->counter.dev = dev;
+ dumcnt->counter.ops = &dumcnt_ops;
+ dumcnt->counter.signals = signals;
+ dumcnt->counter.num_signals = num_signals;
+ dumcnt->counter.values = values;
+ dumcnt->counter.num_values = num_values;
+ dumcnt->counter.driver_data = dumcnt;
+
+ return devm_iio_counter_register(dev, &dumcnt->counter);
+}
+
+static struct platform_device *dumcnt_device;
+
+static struct platform_driver dumcnt_driver = {
+ .driver = {
+ .name = "104-quad-8"
+ }
+};
+
+static void __exit dumcnt_exit(void)
+{
+ platform_device_unregister(dumcnt_device);
+ platform_driver_unregister(&dumcnt_driver);
+}
+
+static int __init dumcnt_init(void)
+{
+ int err;
+
+ dumcnt_device = platform_device_alloc(dumcnt_driver.driver.name, -1);
+ if (!dumcnt_device)
+ return -ENOMEM;
+
+ err = platform_device_add(dumcnt_device);
+ if (err)
+ goto err_platform_device;
+
+ err = platform_driver_probe(&dumcnt_driver, dumcnt_probe);
+ if (err)
+ goto err_platform_driver;
+
+ return 0;
+
+err_platform_driver:
+ platform_device_del(dumcnt_device);
+err_platform_device:
+ platform_device_put(dumcnt_device);
+ return err;
+}
+
+module_init(dumcnt_init);
+module_exit(dumcnt_exit);
+
+MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@...il.com>");
+MODULE_DESCRIPTION("Dummy counter driver");
+MODULE_LICENSE("GPL v2");
--
2.14.1
Powered by blists - more mailing lists