| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171005192248.640495-1-terrelln@fb.com>
Date: Thu, 5 Oct 2017 12:22:48 -0700
From: Nick Terrell <terrelln@...com>
To: René Rebe <rene@...ctcode.com>
CC: <linux-kernel@...r.kernel.org>, Nick Terrell <terrelln@...com>
Subject: [PREVIEW] Add x86 zstd kernel compression
On 10/5/17, 1:18 AM, "René Rebe" <rene@...ctcode.com> wrote:
>
> Hi Nick,
>
> On Oct 5, 2017, at 1:29, Nick Terrell <terrelln@...com> wrote:
>
>> On 10/4/17, 3:01 AM, "linux-kernel-owner@...r.kernel.org on behalf of René Rebe" <linux-kernel-owner@...r.kernel.org on behalf of rene@...ctcode.com> wrote:
>>> Hi,
>>>
>>> I noticed zstd compression was recently added for btrfs and squashfs.
>>> Are there actually already patches floating around for zstd kernel and intird compression?
>>> Looks like that would be a quite nice fit regarding speed and compression ratio, …
>>>
>>> Regards,
>>> René
>>
>> I started working on some patches yesterday, and just got zstd kernel,
>> initrd, and initramfs compression working today. I think I'll be ready to
>> send the patches out within a week.
>
> awesome, if you have something to test I could give it a try on my test bench, too.
Here is a preview of the patch, though its not quite ready.
I believe it works, but I still need to clean it up a bit, and split it
into the decompression function, the initrd piece, and the x86 specific
piece. I'll try to get the patch set out this week, and I'll CC you.
> Regards,
> René
Signed-off-by: Nick Terrell <terrelln@...com>
---
arch/x86/Kconfig | 1 +
arch/x86/boot/compressed/Makefile | 5 +-
arch/x86/boot/compressed/misc.c | 4 +
arch/x86/boot/header.S | 8 +-
arch/x86/include/asm/boot.h | 6 +-
include/linux/decompress/mm.h | 2 +
include/linux/decompress/unzstd.h | 24 +++
init/Kconfig | 11 +-
lib/Kconfig | 6 +-
lib/Makefile | 1 +
lib/decompress.c | 5 +
lib/decompress_unzstd.c | 328 ++++++++++++++++++++++++++++++++++++++
lib/xxhash.c | 21 +--
lib/zstd/decompress.c | 2 +
lib/zstd/fse_decompress.c | 9 +-
scripts/Makefile.lib | 16 ++
usr/Kconfig | 16 ++
17 files changed, 442 insertions(+), 23 deletions(-)
create mode 100644 include/linux/decompress/unzstd.h
create mode 100644 lib/decompress_unzstd.c
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 971feac..e34e3e5 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -150,6 +150,7 @@ config X86
select HAVE_KERNEL_LZMA
select HAVE_KERNEL_LZO
select HAVE_KERNEL_XZ
+ select HAVE_KERNEL_ZSTD
select HAVE_KPROBES
select HAVE_KPROBES_ON_FTRACE
select HAVE_KRETPROBES
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 8a95827..118a423 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -23,7 +23,7 @@ OBJECT_FILES_NON_STANDARD := y
KCOV_INSTRUMENT := n
targets := vmlinux vmlinux.bin vmlinux.bin.gz vmlinux.bin.bz2 vmlinux.bin.lzma \
- vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4
+ vmlinux.bin.xz vmlinux.bin.lzo vmlinux.bin.lz4 vmlinux.bin.zst
KBUILD_CFLAGS := -m$(BITS) -D__KERNEL__ -O2
KBUILD_CFLAGS += -fno-strict-aliasing $(call cc-option, -fPIE, -fPIC)
@@ -133,6 +133,8 @@ $(obj)/vmlinux.bin.lzo: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lzo)
$(obj)/vmlinux.bin.lz4: $(vmlinux.bin.all-y) FORCE
$(call if_changed,lz4)
+$(obj)/vmlinux.bin.zst: $(vmlinux.bin.all-y) FORCE
+ $(call if_changed,zstd)
suffix-$(CONFIG_KERNEL_GZIP) := gz
suffix-$(CONFIG_KERNEL_BZIP2) := bz2
@@ -140,6 +142,7 @@ suffix-$(CONFIG_KERNEL_LZMA) := lzma
suffix-$(CONFIG_KERNEL_XZ) := xz
suffix-$(CONFIG_KERNEL_LZO) := lzo
suffix-$(CONFIG_KERNEL_LZ4) := lz4
+suffix-$(CONFIG_KERNEL_ZSTD) := zst
quiet_cmd_mkpiggy = MKPIGGY $@
cmd_mkpiggy = $(obj)/mkpiggy $< > $@ || ( rm -f $@ ; false )
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index c14217c..8140895 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -74,6 +74,10 @@ static int lines, cols;
#ifdef CONFIG_KERNEL_LZ4
#include "../../../../lib/decompress_unlz4.c"
#endif
+
+#ifdef CONFIG_KERNEL_ZSTD
+#include "../../../../lib/decompress_unzstd.c"
+#endif
/*
* NOTE: When adding a new decompressor, please update the analysis in
* ../header.S.
diff --git a/arch/x86/boot/header.S b/arch/x86/boot/header.S
index 1bb08ec..11b70e1 100644
--- a/arch/x86/boot/header.S
+++ b/arch/x86/boot/header.S
@@ -526,8 +526,14 @@ pref_address: .quad LOAD_PHYSICAL_ADDR # preferred load addr
# the size-dependent part now grows so fast.
#
# extra_bytes = (uncompressed_size >> 8) + 65536
+#
+# ZSTD compressed data grows by at most 3 bytes per 128K, and only has a 22
+# byte fixed overhead but has a maximum block size of 128K, so it needs a
+# larger margin.
+#
+# extra_bytes = (uncompressed_size >> 8) + 131072
-#define ZO_z_extra_bytes ((ZO_z_output_len >> 8) + 65536)
+#define ZO_z_extra_bytes ((ZO_z_output_len >> 8) + 131072)
#if ZO_z_output_len > ZO_z_input_len
# define ZO_z_extract_offset (ZO_z_output_len + ZO_z_extra_bytes - \
ZO_z_input_len)
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index abd06b1..dcfdd4e 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -23,9 +23,11 @@
# error "Invalid value for CONFIG_PHYSICAL_ALIGN"
#endif
-#ifdef CONFIG_KERNEL_BZIP2
+#if defined(CONFIG_KERNEL_BZIP2)
# define BOOT_HEAP_SIZE 0x400000
-#else /* !CONFIG_KERNEL_BZIP2 */
+#elif defined(CONFIG_KERNEL_ZSTD)
+# define BOOT_HEAP_SIZE 0x30000
+#else
# define BOOT_HEAP_SIZE 0x10000
#endif
diff --git a/include/linux/decompress/mm.h b/include/linux/decompress/mm.h
index 7925bf0..e6ec175 100644
--- a/include/linux/decompress/mm.h
+++ b/include/linux/decompress/mm.h
@@ -53,6 +53,8 @@ static void *malloc(int size)
static void free(void *where)
{
+ if (!where)
+ return;
malloc_count--;
if (!malloc_count)
malloc_ptr = free_mem_ptr;
diff --git a/include/linux/decompress/unzstd.h b/include/linux/decompress/unzstd.h
new file mode 100644
index 0000000..645c367
--- /dev/null
+++ b/include/linux/decompress/unzstd.h
@@ -0,0 +1,24 @@
+/*
+ * Copyright (c) 2016-present, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under the BSD-style license found in the
+ * LICENSE file in the root directory of https://github.com/facebook/zstd.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation. This program is dual-licensed; you may select
+ * either version 2 of the GNU General Public License ("GPL") or BSD license
+ * ("BSD").
+ */
+
+#ifndef LINUX_DECOMPRESS_UNZSTD_H
+#define LINUX_DECOMPRESS_UNZSTD_H
+
+int unzstd(unsigned char *inbuf, long len,
+ long (*fill)(void*, unsigned long),
+ long (*flush)(void*, unsigned long),
+ unsigned char *output,
+ long *pos,
+ void(*error_fn)(char *x));
+#endif
diff --git a/init/Kconfig b/init/Kconfig
index 78cb246..5a2a70a 100644
--- a/init/Kconfig
+++ b/init/Kconfig
@@ -127,10 +127,13 @@ config HAVE_KERNEL_LZO
config HAVE_KERNEL_LZ4
bool
+config HAVE_KERNEL_ZSTD
+ bool
+
choice
prompt "Kernel compression mode"
default KERNEL_GZIP
- depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4
+ depends on HAVE_KERNEL_GZIP || HAVE_KERNEL_BZIP2 || HAVE_KERNEL_LZMA || HAVE_KERNEL_XZ || HAVE_KERNEL_LZO || HAVE_KERNEL_LZ4 || HAVE_KERNEL_ZSTD
help
The linux kernel is a kind of self-extracting executable.
Several compression algorithms are available, which differ
@@ -209,6 +212,12 @@ config KERNEL_LZ4
is about 8% bigger than LZO. But the decompression speed is
faster than LZO.
+config KERNEL_ZSTD
+ bool "ZSTD"
+ depends on HAVE_KERNEL_ZSTD
+ help
+ TODO
+
endchoice
config DEFAULT_HOSTNAME
diff --git a/lib/Kconfig b/lib/Kconfig
index b1445b2..02fdcac 100644
--- a/lib/Kconfig
+++ b/lib/Kconfig
@@ -285,6 +285,10 @@ config DECOMPRESS_LZ4
select LZ4_DECOMPRESS
tristate
+config DECOMPRESS_ZSTD
+ select ZSTD_DECOMPRESS
+ tristate
+
#
# Generic allocator support is selected if needed
#
@@ -296,7 +300,7 @@ config GENERIC_ALLOCATOR
#
config REED_SOLOMON
tristate
-
+
config REED_SOLOMON_ENC8
bool
diff --git a/lib/Makefile b/lib/Makefile
index dafa796..8afcdc3 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -128,6 +128,7 @@ lib-$(CONFIG_DECOMPRESS_LZMA) += decompress_unlzma.o
lib-$(CONFIG_DECOMPRESS_XZ) += decompress_unxz.o
lib-$(CONFIG_DECOMPRESS_LZO) += decompress_unlzo.o
lib-$(CONFIG_DECOMPRESS_LZ4) += decompress_unlz4.o
+lib-$(CONFIG_DECOMPRESS_ZSTD) += decompress_unzstd.o
obj-$(CONFIG_TEXTSEARCH) += textsearch.o
obj-$(CONFIG_TEXTSEARCH_KMP) += ts_kmp.o
diff --git a/lib/decompress.c b/lib/decompress.c
index 62696df..b17bb07 100644
--- a/lib/decompress.c
+++ b/lib/decompress.c
@@ -12,6 +12,7 @@
#include <linux/decompress/inflate.h>
#include <linux/decompress/unlzo.h>
#include <linux/decompress/unlz4.h>
+#include <linux/decompress/unzstd.h>
#include <linux/types.h>
#include <linux/string.h>
@@ -36,6 +37,9 @@
#ifndef CONFIG_DECOMPRESS_LZ4
# define unlz4 NULL
#endif
+#ifndef CONFIG_DECOMPRESS_ZSTD
+# define unzstd NULL
+#endif
struct compress_format {
unsigned char magic[2];
@@ -51,6 +55,7 @@ static const struct compress_format compressed_formats[] __initconst = {
{ {0xfd, 0x37}, "xz", unxz },
{ {0x89, 0x4c}, "lzo", unlzo },
{ {0x02, 0x21}, "lz4", unlz4 },
+ { {0x28, 0xb5}, "zstd", unzstd },
{ {0, 0}, NULL, NULL }
};
diff --git a/lib/decompress_unzstd.c b/lib/decompress_unzstd.c
new file mode 100644
index 0000000..44fb672
--- /dev/null
+++ b/lib/decompress_unzstd.c
@@ -0,0 +1,328 @@
+/*
+ * Copyright (c) 2016-present, Facebook, Inc.
+ * All rights reserved.
+ *
+ * This source code is licensed under the BSD-style license found in the
+ * LICENSE file in the root directory of https://github.com/facebook/zstd.
+ *
+ * This program is free software; you can redistribute it and/or modify it under
+ * the terms of the GNU General Public License version 2 as published by the
+ * Free Software Foundation. This program is dual-licensed; you may select
+ * either version 2 of the GNU General Public License ("GPL") or BSD license
+ * ("BSD").
+ */
+
+/*
+ * Important notes about in-place decompression
+ *
+ * At least on x86, the kernel is decompressed in place: the compressed data
+ * is placed to the end of the output buffer, and the decompressor overwrites
+ * most of the compressed data. There must be enough safety margin to
+ * guarantee that the write position is always behind the read position.
+ *
+ * The safety margin for ZSTD with a 128 KB block size is calculated below.
+ * Note that the margin with ZSTD is bigger than with GZIP or XZ!
+ *
+ * The worst case for in-place decompression is that the beginning of
+ * the file is compressed extremely well, and the rest of the file is
+ * uncompressible. Thus, we must look for worst-case expansion when the
+ * compressor is encoding uncompressible data.
+ *
+ * The structure of the .zst file in case of a compresed kernel is as follows.
+ * Maximum sizes (as bytes) of the fields are in parenthesis.
+ *
+ * Frame Header: (18)
+ * Blocks: (N)
+ * Checksum: (4)
+ *
+ * The frame header and checksum overhead is at most 22 bytes.
+ *
+ * ZSTD stores the data in blocks. Each block has a header whose size is
+ * a 3 bytes. After the block header, there is up to 128 KB of payload.
+ * The maximum uncompressed size of the payload is 128 KB. The minimum
+ * uncompressed size of the payload is never less than the payload size
+ * (excluding the block header).
+ *
+ * The assumption, that the uncompressed size of the payload is never
+ * smaller than the payload itself, is valid only when talking about
+ * the payload as a whole. It is possible that the payload has parts where
+ * the decompressor consumes more input than it produces output. Calculating
+ * the worst case for this would be tricky. Instead of trying to do that,
+ * let's simply make sure that the decompressor never overwrites any bytes
+ * of the payload which it is currently reading.
+ *
+ * Now we have enough information to calculate the safety margin. We need
+ * - 22 bytes for the .zst file format headers;
+ * - 3 bytes per every 128 KiB of uncompressed size (one block header per
+ * block); and
+ * - 128 KiB (biggest possible zstd block size) to make sure that the
+ * decompressor never overwrites anything from the block it is currently
+ * reading.
+ *
+ * We get the following formula:
+ *
+ * safety_margin = 22 + uncompressed_size * 3 / 131072 + 131072
+ * <= 22 + (uncompressed_size >> 15) + 131072
+ */
+
+#ifdef STATIC
+# define PREBOOT
+# include "xxhash.c"
+# include "zstd/entropy_common.c"
+# include "zstd/fse_decompress.c"
+# include "zstd/huf_decompress.c"
+# include "zstd/zstd_common.c"
+# include "zstd/decompress.c"
+#endif
+
+#include <linux/decompress/mm.h>
+#include <linux/zstd.h>
+
+/* 8 MB maximum window size */
+#define ZSTD_WINDOWSIZE_MAX (1 << 23)
+/* Size of the input and output buffers in multi-call mdoe */
+#define ZSTD_IOBUF_SIZE 4096
+
+static int INIT handle_zstd_error(size_t ret, void (*error)(char *x))
+{
+ const int err = ZSTD_getErrorCode(ret);
+
+ if (!ZSTD_isError(ret))
+ return 0;
+
+ switch (err) {
+ case ZSTD_error_memory_allocation:
+ error("ZSTD decompressor ran out of memory");
+ break;
+ case ZSTD_error_prefix_unknown:
+ error("Input is not in the ZSTD format (wrong magic bytes)");
+ break;
+ case ZSTD_error_dstSize_tooSmall:
+ case ZSTD_error_corruption_detected:
+ case ZSTD_error_checksum_wrong:
+ error("ZSTD-compressed data is corrupt");
+ break;
+ default:
+ error("ZSTD-compressed data is probably corrupt");
+ break;
+ }
+ return -1;
+}
+
+/*
+ * Handle the case where we have the entire input and output in one segment.
+ * We can allocate less memory (no circular buffer for the sliding window),
+ * and avoid some memcpy() calls.
+ */
+static int INIT decompress_single(const u8 *in_buf, long in_len, u8 *out_buf,
+ long out_len, long *pos,
+ void (*error)(char *x))
+{
+ const size_t wksp_size = ZSTD_DCtxWorkspaceBound();
+ void *wksp = large_malloc(wksp_size);
+ ZSTD_DCtx *dctx = ZSTD_initDCtx(wksp, wksp_size);
+ int err;
+ size_t ret;
+
+ if (!dctx) {
+ error("Out of memory while allocating ZSTD_DCtx");
+ err = -1;
+ goto out;
+ }
+ /* Find out how large the frame actually is, there may be junk at
+ * the end of the frame that ZSTD_decompressDCtx() can't handle.
+ */
+ ret = ZSTD_findFrameCompressedSize(in_buf, in_len);
+ if ((err = handle_zstd_error(ret, error)))
+ goto out;
+ in_len = (long)ret;
+
+ ret = ZSTD_decompressDCtx(dctx, out_buf, out_len, in_buf, in_len);
+ if ((err = handle_zstd_error(ret, error)))
+ goto out;
+
+ if (pos != NULL)
+ *pos = in_len;
+
+ err = 0;
+out:
+ if (wksp)
+ large_free(wksp);
+ return err;
+}
+
+static int INIT __unzstd(unsigned char *in_buf, long in_len,
+ long (*fill)(void*, unsigned long),
+ long (*flush)(void*, unsigned long),
+ unsigned char *out_buf, long out_len,
+ long *pos,
+ void (*error)(char *x))
+{
+ ZSTD_inBuffer in;
+ ZSTD_outBuffer out;
+ ZSTD_frameParams params;
+ void *in_allocated = NULL;
+ void *out_allocated = NULL;
+ void *wksp = NULL;
+ size_t wksp_size;
+ ZSTD_DStream *dstream;
+ int err = -1;
+ size_t ret;
+
+ if (!out_len)
+ out_len = ((size_t)~0) - (size_t)out_buf; /* no limit */
+
+ if (fill == NULL && flush == NULL)
+ /* We can decompress faster and with less memory when we have a
+ * single chunk.
+ */
+ return decompress_single(in_buf, in_len, out_buf, out_len, pos,
+ error);
+
+ /* If in_buf is not provided, we must be using fill(), so allocate
+ * a large enough buffer. If it is provided, it must be at least
+ * ZSTD_IOBUF_SIZE large.
+ */
+ if (!in_buf) {
+ in_allocated = malloc(ZSTD_IOBUF_SIZE);
+ if (!in_allocated) {
+ error("Out of memory while allocating input buffer");
+ err = -1;
+ goto out;
+ }
+ in_buf = in_allocated;
+ in_len = 0;
+ }
+ /* Read the first chunk, since we need to decode the frame header */
+ if (fill)
+ in_len = fill(in_buf, ZSTD_IOBUF_SIZE);
+ if (in_len < 0) {
+ error("ZSTD-compressed data is truncated");
+ err = -1;
+ goto out;
+ }
+ /* Set the first non-empty input buffer */
+ in.src = in_buf;
+ in.pos = 0;
+ in.size = in_len;
+ /* Allocate the output buffer if we are using flush(). */
+ if (flush) {
+ out_allocated = malloc(ZSTD_IOBUF_SIZE);
+ if (!out_allocated) {
+ error("Out of memory while allocating output buffer");
+ err = -1;
+ goto out;
+ }
+ out_buf = out_allocated;
+ out_len = ZSTD_IOBUF_SIZE;
+ }
+ /* Set the output buffer */
+ out.dst = out_buf;
+ out.pos = 0;
+ out.size = out_len;
+
+ /* We need to know the window size to allocate the ZSTD_DStream.
+ * Since we are streaming, we need to allocate a buffer for the sliding
+ * window. The window size varies from 1 KB to ZSTD_WINDOWSIZE_MAX
+ * (8 MB), so it is important to use the actual value so as not to
+ * waste memory when it is smaller.
+ */
+ ret = ZSTD_getFrameParams(¶ms, in.src, in.size);
+ if ((err = handle_zstd_error(ret, error)))
+ goto out;
+ if (ret != 0) {
+ error("ZSTD-compressed data has an incomplete frame header");
+ err = -1;
+ goto out;
+ }
+ if (params.windowSize > ZSTD_WINDOWSIZE_MAX) {
+ error("ZSTD-compressed data has too large a window size");
+ err = -1;
+ goto out;
+ }
+
+ /* Allocate the ZSTD_DStream now that we know how much memory is
+ * required.
+ */
+ wksp_size = ZSTD_DStreamWorkspaceBound(params.windowSize);
+ wksp = large_malloc(wksp_size);
+ dstream = ZSTD_initDStream(params.windowSize, wksp, wksp_size);
+ if (!dstream) {
+ error("Out of memory while allocating ZSTD_DStream");
+ err = -1;
+ goto out;
+ }
+ /* Decompression loop:
+ * Read more data if necessary (error if no more data can be read).
+ * Call the decompression function, which returns 0 when finished.
+ * Flush any data produced if using flush().
+ */
+ if (pos != NULL)
+ *pos = 0;
+ do {
+ /* If we need to reload data, either we have fill() and can
+ * try to get more data, or we don't have the input is
+ * truncated.
+ */
+ if (in.pos == in.size) {
+ if (pos != NULL)
+ *pos += in.pos;
+ in_len = fill ? fill(in_buf, ZSTD_IOBUF_SIZE) : -1;
+ if (in_len < 0) {
+ error("ZSTD-compressed data is truncated");
+ err = -1;
+ goto out;
+ }
+ in.pos = 0;
+ in.size = in_len;
+ }
+ /* Returns zero when the frame is complete */
+ ret = ZSTD_decompressStream(dstream, &out, &in);
+ if ((err = handle_zstd_error(ret, error)))
+ goto out;
+ /* Flush all of the data produced if using flush() */
+ if (flush && out.pos > 0) {
+ if (out.pos != flush(out.dst, out.pos)) {
+ error("Failed to flush()");
+ err = -1;
+ goto out;
+ }
+ out.pos = 0;
+ }
+ } while (ret != 0);
+
+ if (pos != NULL)
+ *pos += in.pos;
+
+ err = 0;
+out:
+ if (in_allocated)
+ free(in_allocated);
+ if (out_allocated)
+ free(out_allocated);
+ if (wksp)
+ large_free(wksp);
+ return err;
+}
+
+#ifndef PREBOOT
+STATIC int INIT unzstd(unsigned char *buf, long len,
+ long (*fill)(void*, unsigned long),
+ long (*flush)(void*, unsigned long),
+ unsigned char *out_buf,
+ long *pos,
+ void (*error)(char *x))
+{
+ return __unzstd(buf, len, fill, flush, out_buf, 0, pos, error);
+}
+#else
+STATIC int INIT __decompress(unsigned char *buf, long len,
+ long (*fill)(void*, unsigned long),
+ long (*flush)(void*, unsigned long),
+ unsigned char *out_buf, long out_len,
+ long *pos,
+ void (*error)(char *x))
+{
+ return __unzstd(buf, len, fill, flush, out_buf, out_len, pos, error);
+}
+#endif
diff --git a/lib/xxhash.c b/lib/xxhash.c
index aa61e2a..7f1d3cb 100644
--- a/lib/xxhash.c
+++ b/lib/xxhash.c
@@ -80,13 +80,11 @@ void xxh32_copy_state(struct xxh32_state *dst, const struct xxh32_state *src)
{
memcpy(dst, src, sizeof(*dst));
}
-EXPORT_SYMBOL(xxh32_copy_state);
void xxh64_copy_state(struct xxh64_state *dst, const struct xxh64_state *src)
{
memcpy(dst, src, sizeof(*dst));
}
-EXPORT_SYMBOL(xxh64_copy_state);
/*-***************************
* Simple Hash Functions
@@ -151,7 +149,6 @@ uint32_t xxh32(const void *input, const size_t len, const uint32_t seed)
return h32;
}
-EXPORT_SYMBOL(xxh32);
static uint64_t xxh64_round(uint64_t acc, const uint64_t input)
{
@@ -234,7 +231,6 @@ uint64_t xxh64(const void *input, const size_t len, const uint64_t seed)
return h64;
}
-EXPORT_SYMBOL(xxh64);
/*-**************************************************
* Advanced Hash Functions
@@ -251,7 +247,6 @@ void xxh32_reset(struct xxh32_state *statePtr, const uint32_t seed)
state.v4 = seed - PRIME32_1;
memcpy(statePtr, &state, sizeof(state));
}
-EXPORT_SYMBOL(xxh32_reset);
void xxh64_reset(struct xxh64_state *statePtr, const uint64_t seed)
{
@@ -265,7 +260,6 @@ void xxh64_reset(struct xxh64_state *statePtr, const uint64_t seed)
state.v4 = seed - PRIME64_1;
memcpy(statePtr, &state, sizeof(state));
}
-EXPORT_SYMBOL(xxh64_reset);
int xxh32_update(struct xxh32_state *state, const void *input, const size_t len)
{
@@ -334,7 +328,6 @@ int xxh32_update(struct xxh32_state *state, const void *input, const size_t len)
return 0;
}
-EXPORT_SYMBOL(xxh32_update);
uint32_t xxh32_digest(const struct xxh32_state *state)
{
@@ -372,7 +365,6 @@ uint32_t xxh32_digest(const struct xxh32_state *state)
return h32;
}
-EXPORT_SYMBOL(xxh32_digest);
int xxh64_update(struct xxh64_state *state, const void *input, const size_t len)
{
@@ -439,7 +431,6 @@ int xxh64_update(struct xxh64_state *state, const void *input, const size_t len)
return 0;
}
-EXPORT_SYMBOL(xxh64_update);
uint64_t xxh64_digest(const struct xxh64_state *state)
{
@@ -494,7 +485,19 @@ uint64_t xxh64_digest(const struct xxh64_state *state)
return h64;
}
+
+#ifndef PREBOOT
+EXPORT_SYMBOL(xxh32_copy_state);
+EXPORT_SYMBOL(xxh64_copy_state);
+EXPORT_SYMBOL(xxh32);
+EXPORT_SYMBOL(xxh64);
+EXPORT_SYMBOL(xxh32_reset);
+EXPORT_SYMBOL(xxh64_reset);
+EXPORT_SYMBOL(xxh32_update);
+EXPORT_SYMBOL(xxh32_digest);
+EXPORT_SYMBOL(xxh64_update);
EXPORT_SYMBOL(xxh64_digest);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("xxHash");
+#endif
diff --git a/lib/zstd/decompress.c b/lib/zstd/decompress.c
index b178467..b7b6599 100644
--- a/lib/zstd/decompress.c
+++ b/lib/zstd/decompress.c
@@ -2487,6 +2487,7 @@ size_t ZSTD_decompressStream(ZSTD_DStream *zds, ZSTD_outBuffer *output, ZSTD_inB
}
}
+#ifndef PREBOOT
EXPORT_SYMBOL(ZSTD_DCtxWorkspaceBound);
EXPORT_SYMBOL(ZSTD_initDCtx);
EXPORT_SYMBOL(ZSTD_decompressDCtx);
@@ -2526,3 +2527,4 @@ EXPORT_SYMBOL(ZSTD_insertBlock);
MODULE_LICENSE("Dual BSD/GPL");
MODULE_DESCRIPTION("Zstd Decompressor");
+#endif
diff --git a/lib/zstd/fse_decompress.c b/lib/zstd/fse_decompress.c
index a84300e..0b35353 100644
--- a/lib/zstd/fse_decompress.c
+++ b/lib/zstd/fse_decompress.c
@@ -47,6 +47,7 @@
****************************************************************/
#include "bitstream.h"
#include "fse.h"
+#include "zstd_internal.h"
#include <linux/compiler.h>
#include <linux/kernel.h>
#include <linux/string.h> /* memcpy, memset */
@@ -60,14 +61,6 @@
enum { FSE_static_assert = 1 / (int)(!!(c)) }; \
} /* use only *after* variable declarations */
-/* check and forward error code */
-#define CHECK_F(f) \
- { \
- size_t const e = f; \
- if (FSE_isError(e)) \
- return e; \
- }
-
/* **************************************************************
* Templates
****************************************************************/
diff --git a/scripts/Makefile.lib b/scripts/Makefile.lib
index 5e975fe..35df22e 100644
--- a/scripts/Makefile.lib
+++ b/scripts/Makefile.lib
@@ -360,6 +360,7 @@ cmd_lz4 = (cat $(filter-out FORCE,$^) | \
lz4c -l -c1 stdin stdout && $(call size_append, $(filter-out FORCE,$^))) > $@ || \
(rm -f $@ ; false)
+
# U-Boot mkimage
# ---------------------------------------------------------------------------
@@ -412,6 +413,21 @@ cmd_xzmisc = (cat $(filter-out FORCE,$^) | \
xz --check=crc32 --lzma2=dict=1MiB) > $@ || \
(rm -f $@ ; false)
+# ZSTD
+# ---------------------------------------------------------------------------
+# Appends the uncompressed size of the data using size_append. The .zst
+# format has the size information available at the beginning of the file too,
+# but it's in a more complex format and it's good to avoid changing the part
+# of the boot code that reads the uncompressed size.
+# Note that the bytes added by size_append will make the zstd tool think that
+# the file is corrupt. This is expected.
+
+quiet_cmd_zstd = ZSTD $@
+cmd_zstd = (cat $(filter-out FORCE,$^) | \
+ zstd -19 && \
+ $(call size_append, $(filter-out FORCE,$^))) > $@ || \
+ (rm -f $@ ; false)
+
# ASM offsets
# ---------------------------------------------------------------------------
diff --git a/usr/Kconfig b/usr/Kconfig
index d53112fd..b7c54de 100644
--- a/usr/Kconfig
+++ b/usr/Kconfig
@@ -105,6 +105,14 @@ config RD_LZ4
Support loading of a LZ4 encoded initial ramdisk or cpio buffer
If unsure, say N.
+config RD_ZSTD
+ bool "Support initial ramdisk/ramfs compressed using ZSTD"
+ default y
+ depends on BLK_DEV_INITRD
+ select DECOMPRESS_ZSTD
+ help
+ TODO
+
choice
prompt "Built-in initramfs compression mode"
depends on INITRAMFS_SOURCE!=""
@@ -213,6 +221,12 @@ config INITRAMFS_COMPRESSION_LZ4
If you choose this, keep in mind that most distros don't provide lz4
by default which could cause a build failure.
+config INITRAMFS_COMPRESSION_ZSTD
+ bool "LZ4"
+ depends on RD_ZSTD
+ help
+ TODO
+
endchoice
config INITRAMFS_COMPRESSION
@@ -225,10 +239,12 @@ config INITRAMFS_COMPRESSION
default ".xz" if INITRAMFS_COMPRESSION_XZ
default ".lzo" if INITRAMFS_COMPRESSION_LZO
default ".lz4" if INITRAMFS_COMPRESSION_LZ4
+ default ".zst" if INITRAMFS_COMPRESSION_ZSTD
default ".gz" if RD_GZIP
default ".lz4" if RD_LZ4
default ".lzo" if RD_LZO
default ".xz" if RD_XZ
default ".lzma" if RD_LZMA
default ".bz2" if RD_BZIP2
+ default ".zst" if RD_ZSTD
default ""
--
2.9.5
Powered by blists - more mailing lists