[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171009142053.rogvykzmoatduv6i@sirena.co.uk>
Date: Mon, 9 Oct 2017 15:20:53 +0100
From: Mark Brown <broonie@...nel.org>
To: Keerthy <j-keerthy@...com>
Cc: linux-kernel@...r.kernel.org, lee.jones@...aro.org,
linux-omap@...r.kernel.org, t-kristo@...com
Subject: Re: [PATCH] regulator: lp873x: Update the enable mask for LDOs and
BUCKs
On Wed, Sep 27, 2017 at 05:55:40PM +0530, Keerthy wrote:
> The reset value of the EN_PIN_CTRL bit fields of LDOs and BUCKs
> need not be set correctly. Hence update the enable mask to include
> the EN_PIN_CTRL bit. While enabling this should be set to 1 so
> that all the regulators are tied to EN pin.
I'm not sure I follow the logic here entirely. It sounds like this is a
register bit to control if the regulators are enabled and disabled via a
GPIO instead of the register which is something that people might want
to use in some systems. Shouldn't this be dependent on some system
configration instead?
>
> Signed-off-by: Keerthy <j-keerthy@...com>
> ---
> drivers/regulator/lp873x-regulator.c | 19 ++++++++++---------
> include/linux/mfd/lp873x.h | 4 ++++
> 2 files changed, 14 insertions(+), 9 deletions(-)
>
> diff --git a/drivers/regulator/lp873x-regulator.c b/drivers/regulator/lp873x-regulator.c
> index 70e3df6..77bea82 100644
> --- a/drivers/regulator/lp873x-regulator.c
> +++ b/drivers/regulator/lp873x-regulator.c
> @@ -20,7 +20,7 @@
> #include <linux/mfd/lp873x.h>
>
> #define LP873X_REGULATOR(_name, _id, _of, _ops, _n, _vr, _vm, _er, _em, \
> - _delay, _lr, _cr) \
> + _dv, _delay, _lr, _cr) \
> [_id] = { \
> .desc = { \
> .name = _name, \
> @@ -36,6 +36,7 @@
> .vsel_mask = _vm, \
> .enable_reg = _er, \
> .enable_mask = _em, \
> + .disable_val = _dv, \
> .ramp_delay = _delay, \
> .linear_ranges = _lr, \
> .n_linear_ranges = ARRAY_SIZE(_lr), \
> @@ -175,21 +176,21 @@ static int lp873x_buck_get_current_limit(struct regulator_dev *rdev)
> LP873X_REGULATOR("BUCK0", LP873X_BUCK_0, "buck0", lp873x_buck01_ops,
> 256, LP873X_REG_BUCK0_VOUT,
> LP873X_BUCK0_VOUT_BUCK0_VSET, LP873X_REG_BUCK0_CTRL_1,
> - LP873X_BUCK0_CTRL_1_BUCK0_EN, 10000,
> - buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
> + LP873X_BUCK_ENABLE_MASK, LP873X_BUCK_DISABLE_VAL,
> + 10000, buck0_buck1_ranges, LP873X_REG_BUCK0_CTRL_2),
> LP873X_REGULATOR("BUCK1", LP873X_BUCK_1, "buck1", lp873x_buck01_ops,
> 256, LP873X_REG_BUCK1_VOUT,
> LP873X_BUCK1_VOUT_BUCK1_VSET, LP873X_REG_BUCK1_CTRL_1,
> - LP873X_BUCK1_CTRL_1_BUCK1_EN, 10000,
> - buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
> + LP873X_BUCK_ENABLE_MASK, LP873X_BUCK_DISABLE_VAL,
> + 10000, buck0_buck1_ranges, LP873X_REG_BUCK1_CTRL_2),
> LP873X_REGULATOR("LDO0", LP873X_LDO_0, "ldo0", lp873x_ldo01_ops, 26,
> LP873X_REG_LDO0_VOUT, LP873X_LDO0_VOUT_LDO0_VSET,
> - LP873X_REG_LDO0_CTRL,
> - LP873X_LDO0_CTRL_LDO0_EN, 0, ldo0_ldo1_ranges, 0xFF),
> + LP873X_REG_LDO0_CTRL, LP873X_LDO_ENABLE_MASK,
> + LP873X_LDO_DISABLE_VAL, 0, ldo0_ldo1_ranges, 0xFF),
> LP873X_REGULATOR("LDO1", LP873X_LDO_1, "ldo1", lp873x_ldo01_ops, 26,
> LP873X_REG_LDO1_VOUT, LP873X_LDO1_VOUT_LDO1_VSET,
> - LP873X_REG_LDO1_CTRL,
> - LP873X_LDO1_CTRL_LDO1_EN, 0, ldo0_ldo1_ranges, 0xFF),
> + LP873X_REG_LDO1_CTRL, LP873X_LDO_ENABLE_MASK,
> + LP873X_LDO_DISABLE_VAL, 0, ldo0_ldo1_ranges, 0xFF),
> };
>
> static int lp873x_regulator_probe(struct platform_device *pdev)
> diff --git a/include/linux/mfd/lp873x.h b/include/linux/mfd/lp873x.h
> index edbec83..53888d4 100644
> --- a/include/linux/mfd/lp873x.h
> +++ b/include/linux/mfd/lp873x.h
> @@ -77,6 +77,8 @@
> #define LP873X_BUCK0_CTRL_1_BUCK0_RDIS_EN BIT(2)
> #define LP873X_BUCK0_CTRL_1_BUCK0_EN_PIN_CTRL BIT(1)
> #define LP873X_BUCK0_CTRL_1_BUCK0_EN BIT(0)
> +#define LP873X_BUCK_ENABLE_MASK (BIT(0) | BIT(1))
> +#define LP873X_BUCK_DISABLE_VAL BIT(1)
>
> #define LP873X_BUCK0_CTRL_2_BUCK0_ILIM 0x38
> #define LP873X_BUCK0_CTRL_2_BUCK0_SLEW_RATE 0x07
> @@ -96,6 +98,8 @@
> #define LP873X_LDO0_CTRL_LDO0_RDIS_EN BIT(2)
> #define LP873X_LDO0_CTRL_LDO0_EN_PIN_CTRL BIT(1)
> #define LP873X_LDO0_CTRL_LDO0_EN BIT(0)
> +#define LP873X_LDO_ENABLE_MASK (BIT(0) | BIT(1))
> +#define LP873X_LDO_DISABLE_VAL BIT(1)
>
> #define LP873X_LDO1_CTRL_LDO1_RDIS_EN BIT(2)
> #define LP873X_LDO1_CTRL_LDO1_EN_PIN_CTRL BIT(1)
> --
> 1.9.1
>
Download attachment "signature.asc" of type "application/pgp-signature" (489 bytes)
Powered by blists - more mailing lists