[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1507565377-1545-1-git-send-email-claudiu.beznea@microchip.com>
Date: Mon, 9 Oct 2017 19:09:22 +0300
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
To: <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <linux@...linux.org.uk>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Claudiu Beznea <claudiu.beznea@...rochip.com>
Subject: [PATCH 00/14] at91 fixes and enhancements
Hi,
This series contains fixes and enhancements for Atmel/Microchip boards,
mainly for SoM1-EK board, SAMA5D2 Xplained board and SAM9x5 boards.
Please accept them for 4.15.
Thank you,
Claudiu Beznea
Claudiu Beznea (14):
ARM: dts: at91: sama5d27_som1_ek: add disabled/okay status
ARM: dts: at91: sama5d27_som1_ek: update serial aliases
ARM: dts: at91: sama5d27_som1_ek: set USER button as a wakeup source
ARM: dts: at91: sama5d27_som1_ek: add aliases for i2c
ARM: dts: at91: sama5d27_som1_ek: add pinmuxing for pwm0
ARM: dts: at91: sama5d27_som1_ek: remove not connected CAN0
ARM: dts: at91: sama5d27_som1_ek: remove pull-up on SD/MMC lines
ARM: dts: at91: sama5d2_xplained: Add charger node of pmic.
ARM: dts: at91: sama5d2_xplained: set PB_USER as wakeup source
ARM: dts: at91: sama5d2_xplained: add pinmuxing for pwm0
ARM: dts: at91: sama5d2_xplained: remove pull-up on SD/MMC lines
ARM: dts: at91: at91sam9x25ek: add CAN1 interface
ARM: dts: at91: at91sam9x25ek: add pwm0
ARM: dts: at91: at91sam9x5ek: use DMA for USART0
arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 46 ++++++++++++++---------------
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 39 ++++++++++++++++--------
arch/arm/boot/dts/at91sam9x25ek.dts | 10 +++++++
arch/arm/boot/dts/at91sam9x5ek.dtsi | 2 ++
4 files changed, 62 insertions(+), 35 deletions(-)
--
2.7.4
Powered by blists - more mailing lists