[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1507565377-1545-10-git-send-email-claudiu.beznea@microchip.com>
Date: Mon, 9 Oct 2017 19:09:31 +0300
From: Claudiu Beznea <claudiu.beznea@...rochip.com>
To: <nicolas.ferre@...rochip.com>,
<alexandre.belloni@...e-electrons.com>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <linux@...linux.org.uk>
CC: <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
Claudiu Beznea <claudiu.beznea@...rochip.com>,
Wenyou Yang <wenyou.yang@...el.com>
Subject: [PATCH 09/15] ARM: dts: at91: sama5d2_xplained: Add charger node of pmic.
Add charger device node as a sub-device node of act8945a mfd, move
the charger's properties to this node, and use the "interrupts"
property to replace "active-semi,irq_gpios" to denote the act8945a
charger's irq.
Signed-off-by: Wenyou Yang <wenyou.yang@...el.com>
[claudiu.beznea@...rochip.com: replace numbers with pin macros]
Signed-off-by: Claudiu Beznea <claudiu.beznea@...rochip.com>
---
arch/arm/boot/dts/at91-sama5d2_xplained.dts | 23 +++++++++++++++--------
1 file changed, 15 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
index c7e9ccf2bc87..848ca1b025be 100644
--- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
+++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
@@ -160,14 +160,6 @@
compatible = "active-semi,act8945a";
reg = <0x5b>;
active-semi,vsel-high;
- active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
- active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
- active-semi,irq_gpios = <&pioA PIN_PB13 GPIO_ACTIVE_LOW>;
- active-semi,input-voltage-threshold-microvolt = <6600>;
- active-semi,precondition-timeout = <40>;
- active-semi,total-timeout = <3>;
- pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
status = "okay";
regulators {
@@ -220,6 +212,21 @@
regulator-always-on;
};
};
+
+ charger {
+ compatible = "active-semi,act8945a-charger";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
+ interrupt-parent = <&pioA>;
+ interrupts = <PIN_PB13 GPIO_ACTIVE_LOW>;
+
+ active-semi,chglev-gpios = <&pioA PIN_PA12 GPIO_ACTIVE_HIGH>;
+ active-semi,lbo-gpios = <&pioA PIN_PC8 GPIO_ACTIVE_LOW>;
+ active-semi,input-voltage-threshold-microvolt = <6600>;
+ active-semi,precondition-timeout = <40>;
+ active-semi,total-timeout = <3>;
+ status = "okay";
+ };
};
};
--
2.7.4
Powered by blists - more mailing lists