[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1507720061-27666-8-git-send-email-LW@KARO-electronics.de>
Date: Wed, 11 Oct 2017 13:07:41 +0200
From: Lothar Waßmann <LW@...O-electronics.de>
To: Fabio Estevam <fabio.estevam@....com>,
Mark Rutland <mark.rutland@....com>,
Rob Herring <robh+dt@...nel.org>,
Russell King <linux@...linux.org.uk>,
Sascha Hauer <kernel@...gutronix.de>,
Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc: Lothar Waßmann <LW@...O-electronics.de>
Subject: [PATCH 7/7] ARM: dts: imx53-tx53: fix interrupt flags and use interrupts-extended property
Use the correct interrupt flags and change the 'interrupt-parent',
'interrupts' property pairs to 'interrupts-extended'.
Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
arch/arm/boot/dts/imx53-tx53-x03x.dts | 6 ++----
arch/arm/boot/dts/imx53-tx53.dtsi | 6 ++----
2 files changed, 4 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/imx53-tx53-x03x.dts b/arch/arm/boot/dts/imx53-tx53-x03x.dts
index aa9ae84..632a097 100644
--- a/arch/arm/boot/dts/imx53-tx53-x03x.dts
+++ b/arch/arm/boot/dts/imx53-tx53-x03x.dts
@@ -242,8 +242,7 @@
reg = <0x38>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_edt_ft5x06_1>;
- interrupt-parent = <&gpio6>;
- interrupts = <15 IRQ_TYPE_EDGE_FALLING>;
+ interrupts-extended = <&gpio6 15 IRQ_TYPE_EDGE_FALLING>;
reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>;
wake-gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
};
@@ -253,8 +252,7 @@
reg = <0x48>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
- interrupt-parent = <&gpio3>;
- interrupts = <26 0>;
+ interrupts-extended = <&gpio3 26 IRQ_TYPE_EDGE_FALLING>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
wakeup-source;
diff --git a/arch/arm/boot/dts/imx53-tx53.dtsi b/arch/arm/boot/dts/imx53-tx53.dtsi
index 8e10c47..76e7186 100644
--- a/arch/arm/boot/dts/imx53-tx53.dtsi
+++ b/arch/arm/boot/dts/imx53-tx53.dtsi
@@ -226,8 +226,7 @@
status = "okay";
phy0: ethernet-phy@0 {
- interrupt-parent = <&gpio2>;
- interrupts = <4>;
+ interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
device_type = "ethernet-phy";
};
};
@@ -246,8 +245,7 @@
reg = <0x68>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ds1339>;
- interrupt-parent = <&gpio4>;
- interrupts = <20 0>;
+ interrupts-extended = <&gpio4 20 IRQ_TYPE_EDGE_FALLING>;
trickle-resistor-ohms = <250>;
trickle-diode-disable;
};
--
2.1.4
Powered by blists - more mailing lists