linux-kernel - [GIT PULL for-4.9 40/48] target/iscsi: Fix unsolicited data seq_end

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20171011004512.7949-41-alexander.levin@verizon.com>
Date:   Wed, 11 Oct 2017 00:45:29 +0000
From:   "Levin, Alexander (Sasha Levin)" <alexander.levin@...izon.com>
To:     "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>
CC:     "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "stable@...r.kernel.org" <stable@...r.kernel.org>
Subject: [GIT PULL for-4.9 40/48] target/iscsi: Fix unsolicited data
 seq_end_offset calculation

From: Varun Prakash <varun@...lsio.com>

[ Upstream commit 4d65491c269729a1e3b375c45e73213f49103d33 ]

In case of unsolicited data for the first sequence
seq_end_offset must be set to minimum of total data length
and FirstBurstLength, so do not add cmd->write_data_done
to the min of total data length and FirstBurstLength.

This patch avoids that with ImmediateData=Yes, InitialR2T=No,
MaxXmitDataSegmentLength < FirstBurstLength that a WRITE command
with IO size above FirstBurstLength triggers sequence error
messages, for example

Set following parameters on target (linux-4.8.12)
ImmediateData = Yes
InitialR2T = No
MaxXmitDataSegmentLength = 8k
FirstBurstLength = 64k

Log in from Open iSCSI initiator and execute
dd if=/dev/zero of=/dev/sdb bs=128k count=1 oflag=direct

Error messages on target
Command ITT: 0x00000035 with Offset: 65536, Length: 8192 outside
of Sequence 73728:131072 while DataSequenceInOrder=Yes.
Command ITT: 0x00000035, received DataSN: 0x00000001 higher than
expected 0x00000000.
Unable to perform within-command recovery while ERL=0.

Signed-off-by: Varun Prakash <varun@...lsio.com>
[ bvanassche: Use min() instead of open-coding it / edited patch description ]
Signed-off-by: Bart Van Assche <bart.vanassche@...disk.com>
Signed-off-by: Nicholas Bellinger <nab@...ux-iscsi.org>

Signed-off-by: Sasha Levin <alexander.levin@...izon.com>
---
 drivers/target/iscsi/iscsi_target_erl0.c | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target_erl0.c b/drivers/target/iscsi/iscsi_target_erl0.c
index efc453ef6831..ab92a1bc9666 100644
--- a/drivers/target/iscsi/iscsi_target_erl0.c
+++ b/drivers/target/iscsi/iscsi_target_erl0.c
@@ -44,10 +44,8 @@ void iscsit_set_dataout_sequence_values(
 	 */
 	if (cmd->unsolicited_data) {
 		cmd->seq_start_offset = cmd->write_data_done;
-		cmd->seq_end_offset = (cmd->write_data_done +
-			((cmd->se_cmd.data_length >
-			  conn->sess->sess_ops->FirstBurstLength) ?
-			 conn->sess->sess_ops->FirstBurstLength : cmd->se_cmd.data_length));
+		cmd->seq_end_offset = min(cmd->se_cmd.data_length,
+					conn->sess->sess_ops->FirstBurstLength);
 		return;
 	}
 
-- 
2.11.0