[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171013215016.bkuwhhhnkvgilump@rob-hp-laptop>
Date: Fri, 13 Oct 2017 16:50:16 -0500
From: Rob Herring <robh@...nel.org>
To: Chaotian Jing <chaotian.jing@...iatek.com>
Cc: Ulf Hansson <ulf.hansson@...aro.org>,
Mark Rutland <mark.rutland@....com>,
Matthias Brugger <matthias.bgg@...il.com>,
Catalin Marinas <catalin.marinas@....com>,
Will Deacon <will.deacon@....com>,
yong mao <yong.mao@...iatek.com>,
Linus Walleij <linus.walleij@...aro.org>,
Heiner Kallweit <hkallweit1@...il.com>,
Phong LE <ple@...libre.com>, linux-mmc@...r.kernel.org,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org, linux-kernel@...r.kernel.org,
srv_heupstream@...iatek.com
Subject: Re: [PATCH v5 01/12] mmc: dt-bindings: Add reg/source_cg/latch-ck
for Mediatek MMC bindings
On Wed, Oct 11, 2017 at 10:41:25AM +0800, Chaotian Jing wrote:
> Change the comptiable for support of multi-platform
> Make compatible explicit
> Add description for reg
> Add description for source_cg
> Add description for mediatek,latch-ck
> Note that source_cg and mediatek,latch-ck are optional for some projects,
> eg, MT2701 do not have source_cg, and MT2712 do not need
> mediatek,latch-ck
>
> Signed-off-by: Chaotian Jing <chaotian.jing@...iatek.com>
> ---
> Documentation/devicetree/bindings/mmc/mtk-sd.txt | 16 +++++++++++++---
> 1 file changed, 13 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> index 4182ea3..2bb585b 100644
> --- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
> @@ -7,10 +7,18 @@ This file documents differences between the core properties in mmc.txt
> and the properties used by the msdc driver.
>
> Required properties:
> -- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc"
> +- compatible: value should be either of the following.
> + "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
> + "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
> + "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
> + "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
> +- reg: physical base address of the controller and length
> - interrupts: Should contain MSDC interrupt number
> -- clocks: MSDC source clock, HCLK
> -- clock-names: "source", "hclk"
> +- clocks: Should contain phandle for the clock feeding the MMC controller
> +- clock-names: Should contain the following:
> + "source" - source clock (required)
> + "hclk" - HCLK which used for host (required)
> + "source_cg" - independent source clock gate (required for MT2712)
> - pinctrl-names: should be "default", "state_uhs"
> - pinctrl-0: should contain default/high speed pin ctrl
> - pinctrl-1: should contain uhs mode pin ctrl
> @@ -30,6 +38,8 @@ Optional properties:
> - mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
> If present,HS400 command responses are sampled on rising edges.
> If not present,HS400 command responses are sampled on falling edges.
> +- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
> + error caused by stop clock(fifo full)
What values are supported? What's the default if not present.
Be clear what compatible strings this property applies to or doesn't
apply to.
Rob
Powered by blists - more mailing lists