[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1507854928-4357-2-git-send-email-hayashi.kunihiko@socionext.com>
Date: Fri, 13 Oct 2017 09:35:27 +0900
From: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
To: netdev@...r.kernel.org, Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
devicetree@...r.kernel.org,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Subject: [PATCH net-next v2 1/2] dt-bindings: net: add DT bindings for Socionext UniPhier AVE
DT bindings for the AVE ethernet controller found on Socionext's
UniPhier platforms.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@...ionext.com>
Signed-off-by: Jassi Brar <jaswinder.singh@...aro.org>
---
.../bindings/net/socionext,uniphier-ave4.txt | 53 ++++++++++++++++++++++
1 file changed, 53 insertions(+)
create mode 100644 Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
diff --git a/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
new file mode 100644
index 0000000..25f4d92
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socionext,uniphier-ave4.txt
@@ -0,0 +1,53 @@
+* Socionext AVE ethernet controller
+
+This describes the devicetree bindings for AVE ethernet controller
+implemented on Socionext UniPhier SoCs.
+
+Required properties:
+ - compatible: Should be
+ - "socionext,uniphier-pro4-ave4" : for Pro4 SoC
+ - "socionext,uniphier-pxs2-ave4" : for PXs2 SoC
+ - "socionext,uniphier-ld20-ave4" : for LD20 SoC
+ - "socionext,uniphier-ld11-ave4" : for LD11 SoC
+ - reg: Address where registers are mapped and size of region.
+ - interrupts: Should contain the MAC interrupt.
+ - phy-mode: See ethernet.txt in the same directory. Allow to choose
+ "rgmii", "rmii", or "mii" according to the PHY.
+ - pinctrl-names: List of assigned state names, see pinctrl
+ binding documentation.
+ - pinctrl-0: List of phandles to configure the GPIO pin,
+ see pinctrl binding documentation. Choose this appropriately
+ according to phy-mode.
+ - <&pinctrl_ether_rgmii> if phy-mode is "rgmii".
+ - <&pinctrl_ether_rmii> if phy-mode is "rmii".
+ - <&pinctrl_ether_mii> if phy-mode is "mii".
+ - phy-handle: Should point to the external phy device.
+ See ethernet.txt file in the same directory.
+ - mdio subnode: Should be device tree subnode with the following required
+ properties:
+ - #address-cells: Must be <1>.
+ - #size-cells: Must be <0>.
+ - reg: phy ID number, usually a small integer.
+
+Optional properties:
+ - local-mac-address: See ethernet.txt in the same directory.
+
+Example:
+
+ ether: ethernet@...00000 {
+ compatible = "socionext,uniphier-ld20-ave4";
+ reg = <0x65000000 0x8500>;
+ interrupts = <0 66 4>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ether_rgmii>;
+ phy-mode = "rgmii";
+ phy-handle = <ðphy>;
+ local-mac-address = [00 00 00 00 00 00];
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ethphy: ethphy@1 {
+ reg = <1>;
+ };
+ };
+ };
--
2.7.4
Powered by blists - more mailing lists