[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6a5d01f35d7df6a49d0442c8326c3daa9bcda9d3.1507882470.git.chunfeng.yun@mediatek.com>
Date: Fri, 13 Oct 2017 16:26:41 +0800
From: Chunfeng Yun <chunfeng.yun@...iatek.com>
To: Mathias Nyman <mathias.nyman@...el.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Felipe Balbi <felipe.balbi@...ux.intel.com>,
Rob Herring <robh+dt@...nel.org>
CC: Matthias Brugger <matthias.bgg@...il.com>,
Mark Rutland <mark.rutland@....com>,
Ian Campbell <ijc+devicetree@...lion.org.uk>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
<linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-usb@...r.kernel.org>, <linux-mediatek@...ts.infradead.org>,
<devicetree@...r.kernel.org>
Subject: [PATCH v2 9/9] dt-bindings: usb: mtk-xhci: remove dummy clocks and add optional ones
Remove dummy clocks for usb wakeup and add optional ones for
MCU_BUS_CK and DMA_BUS_CK.
Signed-off-by: Chunfeng Yun <chunfeng.yun@...iatek.com>
Acked-by: Rob Herring <robh@...nel.org>
---
.../devicetree/bindings/usb/mediatek,mtk-xhci.txt | 18 ++++++++----------
1 file changed, 8 insertions(+), 10 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index 2d9b459..3059596 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -26,10 +26,11 @@ Required properties:
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- clock-names : must contain
- "sys_ck": for clock of xHCI MAC
- "ref_ck": for reference clock of xHCI MAC
- "wakeup_deb_p0": for USB wakeup debounce clock of port0
- "wakeup_deb_p1": for USB wakeup debounce clock of port1
+ "sys_ck": controller clock used by normal mode,
+ the following ones are optional:
+ "ref_ck": reference clock used by low power mode etc,
+ "mcu_ck": mcu_bus clock for register access,
+ "dma_ck": dma_bus clock for data transfer by DMA
- phys : a list of phandle + phy specifier pairs
@@ -57,9 +58,7 @@ usb30: usb@...70000 {
clocks = <&topckgen CLK_TOP_USB30_SEL>, <&clk26m>,
<&pericfg CLK_PERI_USB0>,
<&pericfg CLK_PERI_USB1>;
- clock-names = "sys_ck", "ref_ck",
- "wakeup_deb_p0",
- "wakeup_deb_p1";
+ clock-names = "sys_ck", "ref_ck";
phys = <&phy_port0 PHY_TYPE_USB3>,
<&phy_port1 PHY_TYPE_USB2>;
vusb33-supply = <&mt6397_vusb_reg>;
@@ -91,9 +90,8 @@ Required properties:
- clocks : a list of phandle + clock-specifier pairs, one for each
entry in clock-names
- - clock-names : must be
- "sys_ck": for clock of xHCI MAC
- "ref_ck": for reference clock of xHCI MAC
+ - clock-names : must contain "sys_ck", and the following ones are optional:
+ "ref_ck", "mcu_ck" and "dma_ck"
Optional properties:
- vbus-supply : reference to the VBUS regulator;
--
1.7.9.5
Powered by blists - more mailing lists