linux-kernel - Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI controller

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <20171013194252.yt2zv3xpjgvzonvk@rob-hp-laptop>
Date:   Fri, 13 Oct 2017 14:42:52 -0500
From:   Rob Herring <robh@...nel.org>
To:     Icenowy Zheng <icenowy@...c.io>
Cc:     Tejun Heo <tj@...nel.org>,
        Maxime Ripard <maxime.ripard@...e-electrons.com>,
        Chen-Yu Tsai <wens@...e.org>, linux-ide@...r.kernel.org,
        devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-sunxi@...glegroups.com
Subject: Re: [PATCH 1/2] dt-bindings: add binding for Allwinner R40 SATA AHCI
 controller

On Sun, Oct 08, 2017 at 12:35:40PM +0800, Icenowy Zheng wrote:
> The Allwinner R40 SoC contains a SATA AHCI controller like the one in
> A10/A20 SoCs, however a reset control and two power supplies are added
> to it.
> 
> Add a binding document for it.
> 
> As a dedicated binding document is needed now for the A10/A20/R40 AHCI
> controller, drop the A10 compatible line from generic platform AHCI
> controller binding document.
> 
> Signed-off-by: Icenowy Zheng <icenowy@...c.io>
> ---
>  .../devicetree/bindings/ata/ahci-platform.txt      |  1 -
>  .../bindings/ata/allwinner,sun4i-a10-ahci.txt      | 40 ++++++++++++++++++++++
>  2 files changed, 40 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> 
> diff --git a/Documentation/devicetree/bindings/ata/ahci-platform.txt b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> index fedc213b5f1a..da6818b2c204 100644
> --- a/Documentation/devicetree/bindings/ata/ahci-platform.txt
> +++ b/Documentation/devicetree/bindings/ata/ahci-platform.txt
> @@ -9,7 +9,6 @@ PHYs.
>  
>  Required properties:
>  - compatible        : compatible string, one of:
> -  - "allwinner,sun4i-a10-ahci"
>    - "brcm,iproc-ahci"
>    - "hisilicon,hisi-ahci"
>    - "cavium,octeon-7130-ahci"
> diff --git a/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> new file mode 100644
> index 000000000000..0eea78c14ad3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/ata/allwinner,sun4i-a10-ahci.txt
> @@ -0,0 +1,40 @@
> +Allwinner A10/A20/R40 SoC SATA AHCI Controller
> +
> +Required properties:
> +- compatible        : compatible string, one of:
> +  - "allwinner,sun4i-a10-ahci"
> +  - "allwinner,sun8i-r40-ahci"
> +- interrupts        : the SATA IRQ
> +- reg               : the register mapping
> +- clocks            : the clocks needed by SATA controller, usually contains
> +		      an AHB clock and a mod clock
> +
> +Optional properties:
> +- target-supply     : regulator for SATA target power
> +
> +Required properties for the following compatibles:
> +  - "allwinner,sun8i-r40-ahci"
> +- resets            : the reset control needed by SATA controller
> +- vdd1v2-supply     : regulator for SATA controller's 1.2V VDD
> +- vdd2v5-supply     : regulator for SATA controller's 2.5V VDD

I have to wonder, are these really for the controller and not the phy? 
You don't have any phy?

Rob