[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <13020229.tRmotBUImn@phil>
Date: Sat, 14 Oct 2017 17:39:17 +0200
From: Heiko Stuebner <heiko@...ech.de>
To: Pierre-Hugues Husson <phh@....me>
Cc: Hans Verkuil <hverkuil@...all.nl>,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-media@...r.kernel.org
Subject: [PATCH] pinctrl: rockchip: Add iomux-route switching support for rk3288
So far only the hdmi cec supports using one of two different pins
as source, so add the route switching for it.
Signed-off-by: Heiko Stuebner <heiko@...ech.de>
---
If I didn't mess up any numbering, the pinctrl change should look like
the following patch.
Hope that helps
Heiko
drivers/pinctrl/pinctrl-rockchip.c | 20 ++++++++++++++++++++
1 file changed, 20 insertions(+)
diff --git a/drivers/pinctrl/pinctrl-rockchip.c b/drivers/pinctrl/pinctrl-rockchip.c
index b5cb7858ffdc..8dd49e2e144b 100644
--- a/drivers/pinctrl/pinctrl-rockchip.c
+++ b/drivers/pinctrl/pinctrl-rockchip.c
@@ -884,6 +884,24 @@ static struct rockchip_mux_route_data rk3228_mux_route_data[] = {
},
};
+static struct rockchip_mux_route_data rk3288_mux_route_data[] = {
+ {
+ /* edphdmi_cecinoutt1 */
+ .bank_num = 7,
+ .pin = 16,
+ .func = 2,
+ .route_offset = 0x264,
+ .route_val = BIT(16 + 12) | BIT(12),
+ }, {
+ /* edphdmi_cecinout */
+ .bank_num = 7,
+ .pin = 23,
+ .func = 4,
+ .route_offset = 0x264,
+ .route_val = BIT(16 + 12),
+ },
+};
+
static struct rockchip_mux_route_data rk3328_mux_route_data[] = {
{
/* uart2dbg_rxm0 */
@@ -3391,6 +3409,8 @@ static struct rockchip_pin_ctrl rk3288_pin_ctrl = {
.type = RK3288,
.grf_mux_offset = 0x0,
.pmu_mux_offset = 0x84,
+ .iomux_routes = rk3288_mux_route_data,
+ .niomux_routes = ARRAY_SIZE(rk3288_mux_route_data),
.pull_calc_reg = rk3288_calc_pull_reg_and_bit,
.drv_calc_reg = rk3288_calc_drv_reg_and_bit,
};
--
2.14.1
Powered by blists - more mailing lists