lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171016222955.GQ1165@minitux>
Date:   Mon, 16 Oct 2017 15:29:55 -0700
From:   Bjorn Andersson <bjorn.andersson@...aro.org>
To:     fenglinw@...eaurora.org
Cc:     linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org,
        Linus Walleij <linus.walleij@...aro.org>,
        linux-gpio@...r.kernel.org, collinsd@...eaurora.org,
        aghayal@...eaurora.org, wruan@...eaurora.org,
        subbaram@...eaurora.org, kgunda@...eaurora.org
Subject: Re: [PATCH V1 2/2] pinctrl: qcom: spmi-gpio: Set is_enabled flag in
 set_mux()

On Thu 12 Oct 23:15 PDT 2017, fenglinw@...eaurora.org wrote:

> From: Fenglin Wu <fenglinw@...eaurora.org>
> 
> The initial value of is_enabled flag is read out from hardware in
> pmic_gpio_populate(), and it will be set in pmic_gpio_config_set() if
> pinconf is defined. For any GPIOs disabled initially in hardware which
> only have pinmux defined, they won't be enabled in pmic_gpio_set_mux()
> calling. So set is_enabled flag in set_mux() to ensure the GPIO module
> could be enabled in above case.
> 

I'm still interested in knowing when it is valid to configure a pin with
only mux, no config.  I.e. in what cases does setting a alternative
function make the pinconfig not count.

Regards,
Bjorn

> Signed-off-by: Fenglin Wu <fenglinw@...eaurora.org>
> ---
>  drivers/pinctrl/qcom/pinctrl-spmi-gpio.c | 1 +
>  1 file changed, 1 insertion(+)
> 
> diff --git a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> index 0a1e173..219c934 100644
> --- a/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> +++ b/drivers/pinctrl/qcom/pinctrl-spmi-gpio.c
> @@ -312,6 +312,7 @@ static int pmic_gpio_set_mux(struct pinctrl_dev *pctldev, unsigned function,
>  	}
>  
>  	pad = pctldev->desc->pins[pin].drv_data;
> +	pad->is_enabled = true;
>  	/*
>  	 * Non-LV/MV subtypes only support 2 special functions,
>  	 * offsetting the dtestx function values by 2
> -- 
> Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
> a Linux Foundation Collaborative Project.
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ