[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20171018130628.11298-4-icenowy@aosc.io>
Date: Wed, 18 Oct 2017 21:06:26 +0800
From: Icenowy Zheng <icenowy@...c.io>
To: Maxime Ripard <maxime.ripard@...e-electrons.com>,
Chen-Yu Tsai <wens@...e.org>
Cc: devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org, linux-sunxi@...glegroups.com,
Icenowy Zheng <icenowy@...c.io>
Subject: [PATCH v2 3/5] ARM: sun8i: v40: add 5V regulator for Banana Pi M2 Berry
On the Banana Pi M2 Berry board, the 5V power output (used by HDMI, SATA
and USB) is controlled via a GPIO.
Add regulator node for it.
Signed-off-by: Icenowy Zheng <icenowy@...c.io>
---
arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
index 8a69be2a0842..fe16fc0eb518 100644
--- a/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
+++ b/arch/arm/boot/dts/sun8i-v40-bananapi-m2-berry.dts
@@ -72,6 +72,15 @@
};
};
+ reg_vcc5v0: vcc5v0 {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc5v0";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; /* PH23 */
+ enable-active-high;
+ };
+
wifi_pwrseq: wifi_pwrseq {
compatible = "mmc-pwrseq-simple";
reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 WIFI_EN */
--
2.13.6
Powered by blists - more mailing lists