linux-kernel - Re: [RESEND x2][PATCH 0/3] dwc2 fixes for edge cases on hikey

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CALAqxLXgEQ_eJH03eDndirFPx=bPdP9PphLy20U-YCYy8NCQ2w@mail.gmail.com>
Date:   Thu, 19 Oct 2017 13:06:48 -0700
From:   John Stultz <john.stultz@...aro.org>
To:     Minas Harutyunyan <Minas.Harutyunyan@...opsys.com>
Cc:     John Youn <John.Youn@...opsys.com>,
        lkml <linux-kernel@...r.kernel.org>,
        Wei Xu <xuwei5@...ilicon.com>,
        Guodong Xu <guodong.xu@...aro.org>,
        Amit Pundir <amit.pundir@...aro.org>,
        YongQin Liu <yongqin.liu@...aro.org>,
        Douglas Anderson <dianders@...omium.org>,
        Chen Yu <chenyu56@...wei.com>,
        Felipe Balbi <felipe.balbi@...ux.intel.com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        "linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>
Subject: Re: [RESEND x2][PATCH 0/3] dwc2 fixes for edge cases on hikey

On Tue, Oct 17, 2017 at 1:41 AM, Minas Harutyunyan
<Minas.Harutyunyan@...opsys.com> wrote:
> On 10/17/2017 1:34 AM, John Stultz wrote:
>> On Mon, Oct 16, 2017 at 1:36 AM, Minas Harutyunyan
>> <Minas.Harutyunyan@...opsys.com> wrote:
>>> On b-plug disconnect should asserted GOTGINT.SesEndDet interrupt.
>>> According previously sent by you register dump (GHWCFG2 = 0x23affc70)
>>> your core OTG_MODE=0.
>>> Bellow fragment from programming guide on Device disconnect:
>>>
>>> "7.3Device Disconnection
>>> The device session ends when the USB cable is disconnected or if the
>>> VBUS is switched off by the Host. The
>>> device disconnect flow varies depending on the value of the OTG_MODE
>>> configuration parameter.
>>>
>>> When OTG_MODE = 0,1, or 3
>>> When OTG_MODE is set to 0,1, or 3, the device disconnect flow is as follows:
>>> 1. When the USB cable is unplugged or when the VBUS is switched off by
>>> the Host, the Device core
>>> trigger GINTSTS.OTGInt [bit 2] interrupt bit.
>>> 2. When the device application detects GINTSTS.OTGInt interrupt, it
>>> checks that the
>>> GOTGINT.SesEndDet (Session End Detected) bit is set to 1’b1."
>>>
>>> So, you should receive and handle "Session End Detected". In function
>>> dwc2_handle_otg_intr() on this interrupt (in device mode) calling
>>> dwc2_hsotg_disconnect() function. By adding your patch "[PATCH 3/3] usb:
>>> dwc2: Fix UDC state tracking" state changed to not attached as required.
>>
>>
>> So, on the HiKey board (using 4.14-rc5 + Vardan's patch), I'm not
>> seeing the GOTGINT_SES_END_DET in dwc2_handle_otg_intr() when I remove
>> the USB OTG cable.
>>
>> In fact, I'm not seeing any calls to dwc2_handle_otg_intr()... which
>> seems... odd maybe?  Any clues as to what might be going wrong then?
>>
>> thanks
>> -john
>>
> Hi John Stultz,
> So, on Hikey board on unplug B connector GOTGINT.SesEndDet interrupt not
> asserted, instead asserted GINTSTS_CONIDSTSCHNG. Please, confirm.

Correct. On B unplug, I see:
dwc2_handle_conn_id_status_change_intr: ++Connector ID Status Change
Interrupt++  (Host)

And I never see any calls to dwc2_handle_otg_intr().

> In this case without your patch "[PATCH 1/3] usb: dwc2: Improve gadget
> state disconnection handling" but by applying your patch "[PATCH 3/3]
> usb: dwc2: Fix UDC state tracking":
> 1. On B plug connect UDC state will be set to "configured"
> 2. On B plug disconnect - "not attached".
> Is it Ok for you?

So this is what I expect, but I don't see it. Since without my patch,
nothing seems to call disconenct when the B plug is disconnected, I
still see:
  # cat /sys/class/udc/f72c0000.usb/state
  configured

thanks
-john