linux-kernel - [PATCH 15/18] thermal/drivers/hisi: Use round up step value

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1508432760-17847-15-git-send-email-daniel.lezcano@linaro.org>
Date:   Thu, 19 Oct 2017 19:05:57 +0200
From:   Daniel Lezcano <daniel.lezcano@...aro.org>
To:     edubezval@...il.com, rui.zhang@...el.com
Cc:     linux-pm@...r.kernel.org, leo.yan@...aro.org,
        linux-kernel@...r.kernel.org,
        Kevin Wangtao <kevin.wangtao@...aro.org>
Subject: [PATCH 15/18] thermal/drivers/hisi: Use round up step value

From: Kevin Wangtao <kevin.wangtao@...aro.org>

Use round up division to ensure the programmed value of threshold and the lag
are not less than what we set, and in order to keep the accuracy while using
round up division, the step value should be a rounded up value.  There is
no need to use hisi_thermal_round_temp.

Signed-off-by: Kevin Wangtao <kevin.wangtao@...aro.org>
Tested-by: Daniel Lezcano <daniel.lezcano@...aro.org> # hikey6220
Signed-off-by: Daniel Lezcano <daniel.lezcano@...aro.org>
---
 drivers/thermal/hisi_thermal.c | 22 ++++++++--------------
 1 file changed, 8 insertions(+), 14 deletions(-)

diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index b9e4a9a..b48e47e 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -40,7 +40,7 @@
 
 #define HISI_TEMP_BASE			(-60000)
 #define HISI_TEMP_RESET			(100000)
-#define HISI_TEMP_STEP			(784)
+#define HISI_TEMP_STEP			(785)
 #define HISI_TEMP_LAG			(3500)
 
 #define HISI_MAX_SENSORS		4
@@ -63,19 +63,19 @@ struct hisi_thermal_data {
 /*
  * The temperature computation on the tsensor is as follow:
  *	Unit: millidegree Celsius
- *	Step: 255/200 (0.7843)
+ *	Step: 200/255 (0.7843)
  *	Temperature base: -60°C
  *
- * The register is programmed in temperature steps, every step is 784
+ * The register is programmed in temperature steps, every step is 785
  * millidegree and begins at -60 000 m°C
  *
  * The temperature from the steps:
  *
- *	Temp = TempBase + (steps x 784)
+ *	Temp = TempBase + (steps x 785)
  *
  * and the steps from the temperature:
  *
- *	steps = (Temp - TempBase) / 784
+ *	steps = (Temp - TempBase) / 785
  *
  */
 static inline int hisi_thermal_step_to_temp(int step)
@@ -85,13 +85,7 @@ static inline int hisi_thermal_step_to_temp(int step)
 
 static inline int hisi_thermal_temp_to_step(int temp)
 {
-	return (temp - HISI_TEMP_BASE) / HISI_TEMP_STEP;
-}
-
-static inline int hisi_thermal_round_temp(int temp)
-{
-	return hisi_thermal_step_to_temp(
-		hisi_thermal_temp_to_step(temp));
+	return DIV_ROUND_UP(temp - HISI_TEMP_BASE, HISI_TEMP_STEP);
 }
 
 /*
@@ -127,7 +121,7 @@ static inline int hisi_thermal_round_temp(int temp)
  */
 static inline void hisi_thermal_set_lag(void __iomem *addr, int value)
 {
-	writel((value / HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG);
+	writel(DIV_ROUND_UP(value, HISI_TEMP_STEP) & 0x1F, addr + TEMP0_LAG);
 }
 
 static inline void hisi_thermal_alarm_clear(void __iomem *addr, int value)
@@ -274,7 +268,7 @@ static int hisi_thermal_register_sensor(struct platform_device *pdev,
 
 	for (i = 0; i < of_thermal_get_ntrips(sensor->tzd); i++) {
 		if (trip[i].type == THERMAL_TRIP_PASSIVE) {
-			sensor->thres_temp = hisi_thermal_round_temp(trip[i].temperature);
+			sensor->thres_temp = trip[i].temperature;
 			break;
 		}
 	}
-- 
2.7.4