| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171020085045.7737-2-liwei213@huawei.com>
Date: Fri, 20 Oct 2017 16:50:41 +0800
From: Li Wei <liwei213@...wei.com>
To: <robh+dt@...nel.org>, <mark.rutland@....com>,
<xuwei5@...ilicon.com>, <catalin.marinas@....com>,
<will.deacon@....com>, <vinholikatti@...il.com>,
<jejb@...ux.vnet.ibm.com>, <martin.petersen@...cle.com>,
<khilman@...libre.com>, <arnd@...db.de>,
<gregory.clement@...e-electrons.com>,
<thomas.petazzoni@...e-electrons.com>,
<yamada.masahiro@...ionext.com>, <riku.voipio@...aro.org>,
<treding@...dia.com>, <krzk@...nel.org>, <eric@...olt.net>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-scsi@...r.kernel.org>
CC: <guodong.xu@...aro.org>, <liwei213@...wei.com>,
<fengbaopeng@...ilicon.com>, <lihuan41@...ilicon.com>,
<wangyupeng4@...ilicon.com>
Subject: [PATCH v4 1/5] scsi: ufs: add Hisilicon ufs driver code
add Hisilicon ufs driver code.
Signed-off-by: Li Wei <liwei213@...wei.com>
Signed-off-by: Geng Jianfeng <gengjianfeng@...ilicon.com>
Signed-off-by: Zang Leigang <zangleigang@...ilicon.com>
Signed-off-by: Yu Jianfeng <steven.yujianfeng@...ilicon.com>
---
drivers/scsi/ufs/Kconfig | 9 +
drivers/scsi/ufs/Makefile | 1 +
drivers/scsi/ufs/ufs-hisi.c | 625 ++++++++++++++++++++++++++++++++++++++++++++
drivers/scsi/ufs/ufs-hisi.h | 161 ++++++++++++
4 files changed, 796 insertions(+)
create mode 100644 drivers/scsi/ufs/ufs-hisi.c
create mode 100644 drivers/scsi/ufs/ufs-hisi.h
diff --git a/drivers/scsi/ufs/Kconfig b/drivers/scsi/ufs/Kconfig
index e27b4d4e6ae2..bf2ff5628b15 100644
--- a/drivers/scsi/ufs/Kconfig
+++ b/drivers/scsi/ufs/Kconfig
@@ -80,6 +80,15 @@ config SCSI_UFSHCD_PLATFORM
If unsure, say N.
+config SCSI_UFS_HISI
+ tristate "Hisilicon specific hooks to UFS controller platform driver"
+ depends on (ARCH_HISI || COMPILE_TEST) && SCSI_UFSHCD_PLATFORM
+ ---help---
+ This selects the Hisilicon specific additions to UFSHCD platform driver.
+
+ Select this if you have UFS controller on Hisilicon chipset.
+ If unsure, say N.
+
config SCSI_UFS_DWC_TC_PLATFORM
tristate "DesignWare platform support using a G210 Test Chip"
depends on SCSI_UFSHCD_PLATFORM
diff --git a/drivers/scsi/ufs/Makefile b/drivers/scsi/ufs/Makefile
index 6e77cb0bfee9..9f2c17029a38 100644
--- a/drivers/scsi/ufs/Makefile
+++ b/drivers/scsi/ufs/Makefile
@@ -2,6 +2,7 @@
obj-$(CONFIG_SCSI_UFS_DWC_TC_PCI) += tc-dwc-g210-pci.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_DWC_TC_PLATFORM) += tc-dwc-g210-pltfrm.o ufshcd-dwc.o tc-dwc-g210.o
obj-$(CONFIG_SCSI_UFS_QCOM) += ufs-qcom.o
+obj-$(CONFIG_SCSI_UFS_HISI) += ufs-hisi.o
obj-$(CONFIG_SCSI_UFSHCD) += ufshcd.o
obj-$(CONFIG_SCSI_UFSHCD_PCI) += ufshcd-pci.o
obj-$(CONFIG_SCSI_UFSHCD_PLATFORM) += ufshcd-pltfrm.o
diff --git a/drivers/scsi/ufs/ufs-hisi.c b/drivers/scsi/ufs/ufs-hisi.c
new file mode 100644
index 000000000000..8b7aea2d44c5
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.c
@@ -0,0 +1,625 @@
+/*
+ *
+ * HiSilicon Hixxxx UFS Driver
+ *
+ * Copyright (c) 2016-2017 Linaro Ltd.
+ * Copyright (c) 2016-2017 HiSilicon Technologies Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/gpio.h>
+#include <linux/time.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_gpio.h>
+#include <linux/dma-mapping.h>
+#include <linux/platform_device.h>
+#include <linux/reset.h>
+
+#include "ufshcd.h"
+#include "ufshcd-pltfrm.h"
+#include "unipro.h"
+#include "ufs-hisi.h"
+#include "ufshci.h"
+
+static int ufs_hisi_check_hibern8(struct ufs_hba *hba)
+{
+ int err;
+ u32 tx_fsm_val_0;
+ u32 tx_fsm_val_1;
+ unsigned long timeout = jiffies + msecs_to_jiffies(HBRN8_POLL_TOUT_MS);
+
+ do {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ if (err || (tx_fsm_val_0 == TX_FSM_HIBERN8 &&
+ tx_fsm_val_1 == TX_FSM_HIBERN8))
+ break;
+
+ /* sleep for max. 200us */
+ usleep_range(100, 200);
+ } while (time_before(jiffies, timeout));
+
+ /*
+ * we might have scheduled out for long during polling so
+ * check the state again.
+ */
+ if (time_after(jiffies, timeout)) {
+ err = ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 0),
+ &tx_fsm_val_0);
+ err |= ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(MPHY_TX_FSM_STATE, 1), &tx_fsm_val_1);
+ }
+
+ if (err) {
+ dev_err(hba->dev, "%s: unable to get TX_FSM_STATE, err %d\n",
+ __func__, err);
+ } else if (tx_fsm_val_0 != TX_FSM_HIBERN8 ||
+ tx_fsm_val_1 != TX_FSM_HIBERN8) {
+ err = -1;
+ dev_err(hba->dev, "%s: invalid TX_FSM_STATE, lane0 = %d, lane1 = %d\n",
+ __func__, tx_fsm_val_0, tx_fsm_val_1);
+ }
+
+ return err;
+}
+
+static void ufs_hisi_clk_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ if (ufs_sys_ctrl_readl(host, PHY_CLK_CTRL) & BIT_SYSCTRL_REF_CLOCK_EN)
+ mdelay(1);
+ /* use abb clk */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_SRC_SEl, UFS_SYSCTRL);
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_REFCLK_ISO_EN, PHY_ISO_EN);
+ /* open mphy ref clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+}
+
+static void ufs_hisi_soc_init(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+ u32 reg;
+
+ if (!IS_ERR(host->rst))
+ reset_control_assert(host->rst);
+
+ /* HC_PSW powerup */
+ ufs_sys_ctrl_set_bits(host, BIT_UFS_PSW_MTCMOS_EN, PSW_POWER_CTRL);
+ udelay(10);
+ /* notify PWR ready */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PWR_READY, HC_LP_CTRL);
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | 0,
+ UFS_DEVICE_RESET_CTRL);
+
+ if (gpio_is_valid(host->reset_gpio))
+ gpio_direction_output(host->reset_gpio, 0);
+
+ reg = ufs_sys_ctrl_readl(host, PHY_CLK_CTRL);
+ reg = (reg & ~MASK_SYSCTRL_CFG_CLOCK_FREQ) | UFS_FREQ_CFG_CLK;
+ /* set cfg clk freq */
+ ufs_sys_ctrl_writel(host, reg, PHY_CLK_CTRL);
+ /* set ref clk freq */
+ ufs_sys_ctrl_clr_bits(host, MASK_SYSCTRL_REF_CLOCK_SEL, PHY_CLK_CTRL);
+ /* bypass ufs clk gate */
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_set_bits(host, MASK_UFS_SYSCRTL_BYPASS, UFS_SYSCTRL);
+
+ /* open psw clk */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_PSW_CLK_EN, PSW_CLK_CTRL);
+ /* disable ufshc iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PSW_ISO_CTRL, PSW_POWER_CTRL);
+ /* disable phy iso */
+ ufs_sys_ctrl_clr_bits(host, BIT_UFS_PHY_ISO_CTRL, PHY_ISO_EN);
+ /* notice iso disable */
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_LP_ISOL_EN, HC_LP_CTRL);
+
+ if (!IS_ERR(host->assert))
+ reset_control_deassert(host->assert);
+
+ /* disable lp_reset_n */
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_LP_RESET_N, RESET_CTRL_EN);
+ mdelay(1);
+
+ if (gpio_is_valid(host->reset_gpio))
+ gpio_direction_output(host->reset_gpio, 1);
+
+ ufs_sys_ctrl_writel(host, MASK_UFS_DEVICE_RESET | BIT_UFS_DEVICE_RESET,
+ UFS_DEVICE_RESET_CTRL);
+
+ msleep(20);
+
+ /*
+ * enable the fix of linereset recovery,
+ * and enable rx_reset/tx_rest beat
+ * enable ref_clk_en override(bit5) &
+ * override value = 1(bit4), with mask
+ */
+ ufs_sys_ctrl_writel(host, 0x03300330, UFS_DEVICE_RESET_CTRL);
+
+ if (!IS_ERR(host->rst))
+ reset_control_deassert(host->rst);
+}
+
+static int ufs_hisi_link_startup_pre_change(struct ufs_hba *hba)
+{
+ int err;
+ uint32_t value;
+ uint32_t reg;
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x1);
+ /* PA_HSSeries */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x156A, 0x0), 0x2);
+ /* MPHY CBRATESEL */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8114, 0x0), 0x1);
+ /* MPHY CBOVRCTRL2 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8121, 0x0), 0x2D);
+ /* MPHY CBOVRCTRL3 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8122, 0x0), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* MPHY RXOVRCTRL4 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x4), 0x58);
+ /* MPHY RXOVRCTRL4 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800D, 0x5), 0x58);
+ /* MPHY RXOVRCTRL5 rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x4), 0xB);
+ /* MPHY RXOVRCTRL5 rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x800E, 0x5), 0xB);
+ /* MPHY RXSQCONTROL rx0 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x4), 0x1);
+ /* MPHY RXSQCONTROL rx1 */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8009, 0x5), 0x1);
+ /* Unipro VS_MphyCfgUpdt */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x8113, 0x0), 0x1);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* Gear3 Synclength */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x4), 0x4A);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0095, 0x5), 0x4A);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x4), 0x4A);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0094, 0x5), 0x4A);
+ /* Tactive RX */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x4), 0x7);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x008F, 0x5), 0x7);
+ /* Thibernate Tx */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x0), 0x5);
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x000F, 0x1), 0x5);
+
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD085, 0x0), 0x1);
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), &value);
+ if (value != 0x1)
+ dev_info(hba->dev,
+ "Warring!!! Unipro VS_mphy_disable is 0x%x\n", value);
+
+ /* Unipro VS_mphy_disable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0C1, 0x0), 0x0);
+ err = ufs_hisi_check_hibern8(hba);
+ if (err)
+ dev_err(hba->dev, "ufs_hisi_check_hibern8 error\n");
+
+ ufshcd_writel(hba, UFS_HCLKDIV_NORMAL_VALUE, UFS_REG_HCLKDIV);
+
+ /* disable auto H8 */
+ reg = ufshcd_readl(hba, REG_AUTO_HIBERNATE_IDLE_TIMER);
+ reg = reg & (~UFS_AHIT_AH8ITV_MASK);
+ ufshcd_writel(hba, reg, REG_AUTO_HIBERNATE_IDLE_TIMER);
+
+ /* Unipro PA_Local_TX_LCC_Enable */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x155E, 0x0), 0x0);
+ /* close Unipro VS_Mk2ExtnSupport */
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), 0x0);
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0xD0AB, 0x0), &value);
+ if (value != 0) {
+ /* Ensure close success */
+ dev_info(hba->dev, "WARN: close VS_Mk2ExtnSupport failed\n");
+ }
+
+ return err;
+}
+
+static int ufs_hisi_link_startup_post_change(struct ufs_hba *hba)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ /* Unipro DL_AFC0CreditThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2044), 0x0);
+ /* Unipro DL_TC0OutAckThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2045), 0x0);
+ /* Unipro DL_TC0TXFCThreshold */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x2040), 0x9);
+
+ /* not bypass ufs clk gate */
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_CLK_GATE_BYPASS,
+ CLOCK_GATE_BYPASS);
+ ufs_sys_ctrl_clr_bits(host, MASK_UFS_SYSCRTL_BYPASS,
+ UFS_SYSCTRL);
+
+ return 0;
+}
+
+static int ufs_hisi_link_startup_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status)
+{
+ int err = 0;
+
+ switch (status) {
+ case PRE_CHANGE:
+ err = ufs_hisi_link_startup_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ err = ufs_hisi_link_startup_post_change(hba);
+ break;
+ default:
+ break;
+ }
+
+ return err;
+}
+
+struct ufs_hisi_dev_params {
+ u32 pwm_rx_gear; /* pwm rx gear to work in */
+ u32 pwm_tx_gear; /* pwm tx gear to work in */
+ u32 hs_rx_gear; /* hs rx gear to work in */
+ u32 hs_tx_gear; /* hs tx gear to work in */
+ u32 rx_lanes; /* number of rx lanes */
+ u32 tx_lanes; /* number of tx lanes */
+ u32 rx_pwr_pwm; /* rx pwm working pwr */
+ u32 tx_pwr_pwm; /* tx pwm working pwr */
+ u32 rx_pwr_hs; /* rx hs working pwr */
+ u32 tx_pwr_hs; /* tx hs working pwr */
+ u32 hs_rate; /* rate A/B to work in HS */
+ u32 desired_working_mode;
+};
+
+static int ufs_hisi_get_pwr_dev_param(
+ struct ufs_hisi_dev_params *hisi_param,
+ struct ufs_pa_layer_attr *dev_max,
+ struct ufs_pa_layer_attr *agreed_pwr)
+{
+ int min_hisi_gear;
+ int min_dev_gear;
+ bool is_dev_sup_hs = false;
+ bool is_hisi_max_hs = false;
+
+ if (dev_max->pwr_rx == FASTAUTO_MODE || dev_max->pwr_rx == FAST_MODE)
+ is_dev_sup_hs = true;
+
+ if (hisi_param->desired_working_mode == FAST) {
+ is_hisi_max_hs = true;
+ min_hisi_gear = min_t(u32, hisi_param->hs_rx_gear,
+ hisi_param->hs_tx_gear);
+ } else {
+ min_hisi_gear = min_t(u32, hisi_param->pwm_rx_gear,
+ hisi_param->pwm_tx_gear);
+ }
+
+ /*
+ * device doesn't support HS but
+ * hisi_param->desired_working_mode is HS,
+ * thus device and hisi_param don't agree
+ */
+ if (!is_dev_sup_hs && is_hisi_max_hs) {
+ pr_err("%s: device not support HS\n", __func__);
+ return -ENOTSUPP;
+ } else if (is_dev_sup_hs && is_hisi_max_hs) {
+ /*
+ * since device supports HS, it supports FAST_MODE.
+ * since hisi_param->desired_working_mode is also HS
+ * then final decision (FAST/FASTAUTO) is done according
+ * to hisi_params as it is the restricting factor
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_hs;
+ } else {
+ /*
+ * here hisi_param->desired_working_mode is PWM.
+ * it doesn't matter whether device supports HS or PWM,
+ * in both cases hisi_param->desired_working_mode will
+ * determine the mode
+ */
+ agreed_pwr->pwr_rx = agreed_pwr->pwr_tx =
+ hisi_param->rx_pwr_pwm;
+ }
+
+ /*
+ * we would like tx to work in the minimum number of lanes
+ * between device capability and vendor preferences.
+ * the same decision will be made for rx
+ */
+ agreed_pwr->lane_tx =
+ min_t(u32, dev_max->lane_tx, hisi_param->tx_lanes);
+ agreed_pwr->lane_rx =
+ min_t(u32, dev_max->lane_rx, hisi_param->rx_lanes);
+
+ /* device maximum gear is the minimum between device rx and tx gears */
+ min_dev_gear = min_t(u32, dev_max->gear_rx, dev_max->gear_tx);
+
+ /*
+ * if both device capabilities and vendor pre-defined preferences are
+ * both HS or both PWM then set the minimum gear to be the chosen
+ * working gear.
+ * if one is PWM and one is HS then the one that is PWM get to decide
+ * what is the gear, as it is the one that also decided previously what
+ * pwr the device will be configured to.
+ */
+ if ((is_dev_sup_hs && is_hisi_max_hs) ||
+ (!is_dev_sup_hs && !is_hisi_max_hs))
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx =
+ min_t(u32, min_dev_gear, min_hisi_gear);
+ else
+ agreed_pwr->gear_rx = agreed_pwr->gear_tx = min_hisi_gear;
+
+ agreed_pwr->hs_rate = hisi_param->hs_rate;
+
+ pr_info("ufs final power mode: gear = %d, lane = %d, pwr = %d, rate = %d\n",
+ agreed_pwr->gear_rx, agreed_pwr->lane_rx, agreed_pwr->pwr_rx,
+ agreed_pwr->hs_rate);
+ return 0;
+}
+
+static void ufs_hisi_pwr_change_pre_change(struct ufs_hba *hba)
+{
+ /* update */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15A8), 0x1);
+ /* PA_TxSkip */
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x155c), 0x0);
+ /*PA_PWRModeUserData0 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b0), 8191);
+ /*PA_PWRModeUserData1 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b1), 65535);
+ /*PA_PWRModeUserData2 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b2), 32767);
+ /*DME_FC0ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd041), 8191);
+ /*DME_TC0ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd042), 65535);
+ /*DME_AFC0ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd043), 32767);
+ /*PA_PWRModeUserData3 = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b3), 8191);
+ /*PA_PWRModeUserData4 = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b4), 65535);
+ /*PA_PWRModeUserData5 = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0x15b5), 32767);
+ /*DME_FC1ProtectionTimeOutVal = 8191, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd044), 8191);
+ /*DME_TC1ReplayTimeOutVal = 65535, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd045), 65535);
+ /*DME_AFC1ReqTimeOutVal = 32767, default is 0*/
+ ufshcd_dme_set(hba, UIC_ARG_MIB(0xd046), 32767);
+}
+
+static int ufs_hisi_pwr_change_notify(struct ufs_hba *hba,
+ enum ufs_notify_change_status status,
+ struct ufs_pa_layer_attr *dev_max_params,
+ struct ufs_pa_layer_attr *dev_req_params)
+{
+ struct ufs_hisi_dev_params ufs_hisi_cap;
+ int ret = 0;
+ uint32_t value;
+
+ if (!dev_req_params) {
+ dev_err(hba->dev,
+ "%s: incoming dev_req_params is NULL\n", __func__);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (status) {
+ case PRE_CHANGE:
+ ufs_hisi_cap.rx_lanes = UFS_HISI_LIMIT_NUM_LANES_RX;
+ ufs_hisi_cap.tx_lanes = UFS_HISI_LIMIT_NUM_LANES_TX;
+ ufs_hisi_cap.hs_rx_gear = UFS_HISI_LIMIT_HSGEAR_RX;
+ ufs_hisi_cap.hs_tx_gear = UFS_HISI_LIMIT_HSGEAR_TX;
+ ufs_hisi_cap.pwm_rx_gear = UFS_HISI_LIMIT_PWMGEAR_RX;
+ ufs_hisi_cap.pwm_tx_gear = UFS_HISI_LIMIT_PWMGEAR_TX;
+ ufs_hisi_cap.rx_pwr_pwm = UFS_HISI_LIMIT_RX_PWR_PWM;
+ ufs_hisi_cap.tx_pwr_pwm = UFS_HISI_LIMIT_TX_PWR_PWM;
+ ufs_hisi_cap.rx_pwr_hs = UFS_HISI_LIMIT_RX_PWR_HS;
+ ufs_hisi_cap.tx_pwr_hs = UFS_HISI_LIMIT_TX_PWR_HS;
+ ufs_hisi_cap.hs_rate = UFS_HISI_LIMIT_HS_RATE;
+ ufs_hisi_cap.desired_working_mode = UFS_HISI_LIMIT_DESIRED_MODE;
+
+ ret = ufs_hisi_get_pwr_dev_param(
+ &ufs_hisi_cap, dev_max_params, dev_req_params);
+ if (ret) {
+ dev_err(hba->dev,
+ "%s: failed to determine capabilities\n", __func__);
+ goto out;
+ }
+
+ dev_info(hba->dev, "set TX_EQUALIZER 3.5db\n");
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0037, 0x0), 0x1);
+ if ((dev_req_params->lane_tx > 1) &&
+ (dev_req_params->lane_rx > 1))
+ ufshcd_dme_set(hba, UIC_ARG_MIB_SEL(0x0037, 0x1), 0x1);
+
+ ufs_hisi_pwr_change_pre_change(hba);
+ break;
+ case POST_CHANGE:
+ ufshcd_dme_get(hba, UIC_ARG_MIB_SEL(0x0037, 0x0), &value);
+ dev_info(hba->dev,
+ "check TX_EQUALIZER DB value lane0 = 0x%x\n", value);
+ if ((dev_req_params->lane_tx > 1) &&
+ (dev_req_params->lane_rx > 1)) {
+ ufshcd_dme_get(hba,
+ UIC_ARG_MIB_SEL(0x0037, 0x1), &value);
+ dev_info(hba->dev,
+ "TX_EQUALIZER DB value lane1 = 0x%x\n", value);
+ }
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+out:
+ return ret;
+}
+
+static int ufs_hisi_suspend(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (ufshcd_is_runtime_pm(pm_op))
+ return 0;
+
+ if (host->in_suspend) {
+ WARN_ON(1);
+ return 0;
+ }
+
+ ufs_sys_ctrl_clr_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+ udelay(10);
+ /* set ref_dig_clk override of PHY PCS to 0 */
+ ufs_sys_ctrl_writel(host, 0x00100000, UFS_DEVICE_RESET_CTRL);
+
+ host->in_suspend = true;
+
+ return 0;
+}
+
+static int ufs_hisi_resume(struct ufs_hba *hba, enum ufs_pm_op pm_op)
+{
+ struct ufs_hisi_host *host = ufshcd_get_variant(hba);
+
+ if (!host->in_suspend)
+ return 0;
+
+ /* set ref_dig_clk override of PHY PCS to 1 */
+ ufs_sys_ctrl_writel(host, 0x00100010, UFS_DEVICE_RESET_CTRL);
+ udelay(10);
+ ufs_sys_ctrl_set_bits(host, BIT_SYSCTRL_REF_CLOCK_EN, PHY_CLK_CTRL);
+
+ host->in_suspend = false;
+ return 0;
+}
+
+static int ufs_hisi_get_resource(struct ufs_hisi_host *host)
+{
+ struct resource *mem_res;
+ struct device *dev = host->hba->dev;
+ struct platform_device *pdev = to_platform_device(dev);
+
+ /* get resource of ufs sys ctrl */
+ mem_res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ host->ufs_sys_ctrl = devm_ioremap_resource(dev, mem_res);
+
+ if (IS_ERR(host->ufs_sys_ctrl))
+ return PTR_ERR(host->ufs_sys_ctrl);
+
+ host->rst = devm_reset_control_get(dev, "rst");
+ host->assert = devm_reset_control_get(dev, "assert");
+
+ return 0;
+}
+
+static void ufs_hisi_set_pm_lvl(struct ufs_hba *hba)
+{
+ hba->rpm_lvl = UFS_PM_LVL_1;
+ hba->spm_lvl = UFS_PM_LVL_3;
+}
+
+/**
+ * ufs_hisi_init
+ * @hba: host controller instance
+ */
+static int ufs_hisi_init(struct ufs_hba *hba)
+{
+ int err;
+ struct device *dev = hba->dev;
+ struct ufs_hisi_host *host;
+
+ host = devm_kzalloc(dev, sizeof(*host), GFP_KERNEL);
+ if (!host)
+ return -ENOMEM;
+
+ host->hba = hba;
+ ufshcd_set_variant(hba, host);
+
+ host->reset_gpio = of_get_named_gpio(hba->dev->of_node,
+ "reset-gpio", 0);
+ if (gpio_is_valid(host->reset_gpio)) {
+ err = devm_gpio_request_one(dev, host->reset_gpio,
+ GPIOF_DIR_OUT, "hisi_ufs_reset");
+ if (err)
+ dev_err(dev, "could not acquire gpio (err=%d)\n", err);
+ }
+
+ ufs_hisi_set_pm_lvl(hba);
+
+ err = ufs_hisi_get_resource(host);
+ if (err) {
+ ufshcd_set_variant(hba, NULL);
+ return err;
+ }
+
+ ufs_hisi_clk_init(hba);
+
+ ufs_hisi_soc_init(hba);
+
+ return 0;
+}
+
+static struct ufs_hba_variant_ops ufs_hba_hisi_vops = {
+ .name = "hisi",
+ .init = ufs_hisi_init,
+ .link_startup_notify = ufs_hisi_link_startup_notify,
+ .pwr_change_notify = ufs_hisi_pwr_change_notify,
+ .suspend = ufs_hisi_suspend,
+ .resume = ufs_hisi_resume,
+};
+
+static int ufs_hisi_probe(struct platform_device *pdev)
+{
+ return ufshcd_pltfrm_init(pdev, &ufs_hba_hisi_vops);
+}
+
+static int ufs_hisi_remove(struct platform_device *pdev)
+{
+ struct ufs_hba *hba = platform_get_drvdata(pdev);
+
+ ufshcd_remove(hba);
+ return 0;
+}
+
+static const struct of_device_id ufs_hisi_of_match[] = {
+ { .compatible = "hisilicon,hi3660-ufs" },
+ {},
+};
+
+static const struct dev_pm_ops ufs_hisi_pm_ops = {
+ .suspend = ufshcd_pltfrm_suspend,
+ .resume = ufshcd_pltfrm_resume,
+ .runtime_suspend = ufshcd_pltfrm_runtime_suspend,
+ .runtime_resume = ufshcd_pltfrm_runtime_resume,
+ .runtime_idle = ufshcd_pltfrm_runtime_idle,
+};
+
+static struct platform_driver ufs_hisi_pltform = {
+ .probe = ufs_hisi_probe,
+ .remove = ufs_hisi_remove,
+ .shutdown = ufshcd_pltfrm_shutdown,
+ .driver = {
+ .name = "ufshcd-hisi",
+ .pm = &ufs_hisi_pm_ops,
+ .of_match_table = of_match_ptr(ufs_hisi_of_match),
+ },
+};
+module_platform_driver(ufs_hisi_pltform);
+
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:ufshcd-hisi");
+MODULE_DESCRIPTION("HiSilicon Hixxxx UFS Driver");
diff --git a/drivers/scsi/ufs/ufs-hisi.h b/drivers/scsi/ufs/ufs-hisi.h
new file mode 100644
index 000000000000..c2cf5830d26c
--- /dev/null
+++ b/drivers/scsi/ufs/ufs-hisi.h
@@ -0,0 +1,161 @@
+/* Copyright (c) 2017, HiSilicon. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#ifndef UFS_HISI_H_
+#define UFS_HISI_H_
+
+#define HBRN8_POLL_TOUT_MS 1000
+
+/*
+ * pericrg specific define
+ */
+#define PEREN5_OFFSET (0x050)
+#define PERRSTEN3_OFFSET (0x084)
+#define PERRSTDIS3_OFFSET (0x088)
+#define PERRSTSTAT3_OFFSET (0x08C)
+#define CLKDIV16_OFFSET (0x0E8)
+#define CLKDIV17_OFFSET (0x0EC)
+#define CLKDIV21_OFFSET (0x0FC)
+#define UFS_ARESET UFS_BIT(7)
+#define RST_UFS UFS_BIT(12)
+
+/*
+ * ufs sysctrl specific define
+ */
+#define PSW_POWER_CTRL (0x04)
+#define PHY_ISO_EN (0x08)
+#define HC_LP_CTRL (0x0C)
+#define PHY_CLK_CTRL (0x10)
+#define PSW_CLK_CTRL (0x14)
+#define CLOCK_GATE_BYPASS (0x18)
+#define RESET_CTRL_EN (0x1C)
+#define PHY_RESET_STATUS (0x28)
+#define UFS_SYSCTRL (0x5C)
+#define UFS_DEVICE_RESET_CTRL (0x60)
+#define UFS_APB_ADDR_MASK (0x64)
+
+#define BIT_UFS_PSW_ISO_CTRL (1 << 16)
+#define BIT_UFS_PSW_MTCMOS_EN (1 << 0)
+#define BIT_UFS_REFCLK_ISO_EN (1 << 16)
+#define BIT_UFS_PHY_ISO_CTRL (1 << 0)
+#define BIT_SYSCTRL_LP_ISOL_EN (1 << 16)
+#define BIT_SYSCTRL_LP_PWR_GATE (1 << 0)
+#define BIT_SYSCTRL_PWR_READY (1 << 8)
+#define BIT_SYSCTRL_REF_CLOCK_EN (1 << 24)
+#define MASK_SYSCTRL_REF_CLOCK_SEL (0x3 << 8)
+#define MASK_SYSCTRL_CFG_CLOCK_FREQ (0xFF)
+#define UFS_FREQ_CFG_CLK (0x39)
+#define BIT_SYSCTRL_PSW_CLK_EN (1 << 4)
+#define MASK_UFS_CLK_GATE_BYPASS (0x3F)
+#define BIT_STATUS_LP_RESETCOMPLETE (1 << 0)
+#define BIT_SYSCTRL_LP_RESET_N (1 << 0)
+#define BIT_UFS_REFCLK_SRC_SEl (1 << 0)
+#define MASK_UFS_SYSCRTL_BYPASS (0x3F << 16)
+#define MASK_UFS_DEVICE_RESET (0x1 << 16)
+#define BIT_UFS_DEVICE_RESET (0x1)
+
+/*
+ * M-TX Configuration Attributes for Hixxxx
+ */
+#define MPHY_TX_FSM_STATE 0x41
+#define TX_FSM_DISABLED 0x0
+#define TX_FSM_HIBERN8 0x1
+#define TX_FSM_SLEEP 0x2
+#define TX_FSM_STALL 0x3
+#define TX_FSM_LS_BURST 0x4
+#define TX_FSM_HS_BURST 0x5
+#define TX_FSM_LINE_CFG 0x6
+#define TX_FSM_LINE_RESET 0x7
+
+/*
+ * Hixxxx UFS HC specific Registers
+ */
+enum {
+ UFS_REG_OCPTHRTL = 0xc0,
+ UFS_REG_OOCPR = 0xc4,
+
+ UFS_REG_CDACFG = 0xd0,
+ UFS_REG_CDATX1 = 0xd4,
+ UFS_REG_CDATX2 = 0xd8,
+ UFS_REG_CDARX1 = 0xdc,
+ UFS_REG_CDARX2 = 0xe0,
+ UFS_REG_CDASTA = 0xe4,
+
+ UFS_REG_LBMCFG = 0xf0,
+ UFS_REG_LBMSTA = 0xf4,
+ UFS_REG_UFSMODE = 0xf8,
+
+ UFS_REG_HCLKDIV = 0xfc,
+};
+
+/* AHIT - Auto-Hibernate Idle Timer */
+#define UFS_AHIT_AH8ITV_MASK 0x3FF
+
+#define UFS_AHIT_AUTOH8_TIMER (0x1001)
+
+/* REG UFS_REG_OCPTHRTL definition */
+#define LP_PGE UFS_BIT(16)
+#define LP_AH8_PGE UFS_BIT(17)
+
+#define UFS_HCLKDIV_NORMAL_VALUE 0xE4
+#define UFS_HCLKDIV_FPGA_VALUE 0x28
+
+/* Hixxxx UFS Unipro specific Registers */
+#define VS_ULPH8_Cntrl 0xd0af
+#define Ulp_Ulp_CtrlMode UFS_BIT(3)
+
+/* vendor specific pre-defined parameters */
+#define SLOW 1
+#define FAST 2
+
+#define UFS_HISI_LIMIT_NUM_LANES_RX 2
+#define UFS_HISI_LIMIT_NUM_LANES_TX 2
+#define UFS_HISI_LIMIT_HSGEAR_RX UFS_HS_G3
+#define UFS_HISI_LIMIT_HSGEAR_TX UFS_HS_G3
+#define UFS_HISI_LIMIT_PWMGEAR_RX UFS_PWM_G1
+#define UFS_HISI_LIMIT_PWMGEAR_TX UFS_PWM_G1
+#define UFS_HISI_LIMIT_RX_PWR_PWM SLOWAUTO_MODE
+#define UFS_HISI_LIMIT_TX_PWR_PWM SLOWAUTO_MODE
+#define UFS_HISI_LIMIT_RX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_TX_PWR_HS FAST_MODE
+#define UFS_HISI_LIMIT_HS_RATE PA_HS_MODE_B
+#define UFS_HISI_LIMIT_DESIRED_MODE FAST
+
+struct ufs_hisi_host {
+ struct ufs_hba *hba;
+ void __iomem *ufs_sys_ctrl;
+ struct reset_control *rst;
+ struct reset_control *assert;
+
+ int avail_ln_rx;
+ int avail_ln_tx;
+
+ u32 busthrtl_backup;
+ u32 reset_gpio;
+
+ bool in_suspend;
+
+ struct ufs_pa_layer_attr dev_req_params;
+};
+
+#define ufs_sys_ctrl_writel(host, val, reg) \
+ writel((val), (host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_readl(host, reg) readl((host)->ufs_sys_ctrl + (reg))
+#define ufs_sys_ctrl_set_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel( \
+ (host), ((mask) | (ufs_sys_ctrl_readl((host), (reg)))), (reg))
+#define ufs_sys_ctrl_clr_bits(host, mask, reg) \
+ ufs_sys_ctrl_writel((host), \
+ ((~(mask)) & (ufs_sys_ctrl_readl((host), (reg)))), \
+ (reg))
+#endif /* UFS_HISI_H_ */
--
2.11.0
Powered by blists - more mailing lists