| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171020180529.GC1165@minitux>
Date: Fri, 20 Oct 2017 11:05:29 -0700
From: Bjorn Andersson <bjorn.andersson@...aro.org>
To: Vijay Viswanath <vviswana@...eaurora.org>
Cc: adrian.hunter@...el.com, ulf.hansson@...aro.org,
will.deacon@....com, linux-arm-kernel@...ts.infradead.org,
linux-mmc@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-msm@...r.kernel.org, asutoshd@...eaurora.org,
stummala@...eaurora.org, riteshh@...eaurora.org,
subhashj@...eaurora.org
Subject: Re: [PATCH v2 4/4] mmc: sdhci-msm: Add sdhci msm register write APIs
which wait for pwr irq
On Fri 20 Oct 03:54 PDT 2017, Vijay Viswanath wrote:
> On 10/14/2017 1:01 PM, Bjorn Andersson wrote:
> > On Tue 26 Sep 22:34 PDT 2017, Vijay Viswanath wrote:
> >
> > > diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
> > [..]
> > > + if (!done) {
> > > + if (!wait_event_timeout(msm_host->pwr_irq_wait,
> > > + msm_host->pwr_irq_flag,
> > > + msecs_to_jiffies(MSM_PWR_IRQ_TIMEOUT_MS)))
> > > + __WARN_printf("%s: pwr_irq for req: (%d) timed out\n",
> > > + mmc_hostname(host->mmc), req_type);
> >
> > Bumped my MSM8974AB device to latest linux-next and found this patch; I
> > see this print every five seconds during boot and the eMMC never comes
> > up.
> >
> > Regards,
> > Bjorn
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-mmc" in
> > the body of a message to majordomo@...r.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
> >
>
> Hi Bjorn,
>
Hi Vijay,
> I couldn't get one 8974 device. I tested the latest linux-next on db410c and
> its not showing any issue. 8974 is an older msm and has some differences in
> the controller like your "mmc: sdhci-msm: Enable delay circuit calibration
> clocks" patch.
>
In particular there seems to be some quirks that appeared in 8974pro
(which this is).
> I am currently going through the programming guide to see what could be the
> reason. Can you please share the full logs from the device with me so that I
> can focus my search?
>
Of course, sorry for the drive-by report without much to go on. I did
some more testing and you can find an extract of the kernel log below.
I was apparently not patient enough before, after 124 seconds we're
through all the timeouts and my eMMC is "functional" - so things are
working, but we're getting stuck waiting for the timeout every time
we're waiting for the pwr irq.
As you can see below we get sdhci_msm_handle_pwr_irq() with status
BUS_ON, so we set io-level HIGH. Then we don't get any more pwr
interrupts, so the io_level remains "high" - although I believe we're
actually low (vqmmc is always 1.8V on this board).
Worth noting is the large comment in sdhci_msm_check_power_status()
related to !host->pwr, host->pwr is always 0 on this board.
# dmesg |grep mmc0
[ 1.734573] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 1.857611] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 1.889400] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 2.141634] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 2.163023] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 2.238875] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(0), irq_status=0x0, ack=0x0
[ 2.509617] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 0 curr_io_level 0
[ 2.509710] mmc0: sdhci_msm_pwr_irq()
[ 2.509723] mmc0: sdhci_msm_handle_pwr_irq: Handled IRQ(30), irq_status=0x2, ack=0x1
[ 2.536468] mmc0: sdhci_msm_check_power_status: request 2 done
[ 2.546363] mmc0: sdhci_msm_check_power_status: request 8 curr_pwr_state 2 curr_io_level 8
[ 2.551220] mmc0: do not wait for power IRQ that never comes, req_type: 8
[ 2.559502] sdhci_msm f9824900.sdhci: mmc0: clock=0 uhs=0 ctrl_2=0x0
[ 2.572777] mmc0: sdhci_msm_check_power_status: request 8 curr_pwr_state 2 curr_io_level 8
[ 2.577353] mmc0: do not wait for power IRQ that never comes, req_type: 8
[ 2.592564] mmc0: sdhci_msm_check_power_status: request 8 curr_pwr_state 2 curr_io_level 8
[ 2.597230] mmc0: do not wait for power IRQ that never comes, req_type: 8
[ 2.605589] mmc0: Switching to 3.3V signalling voltage failed
[ 2.618172] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 7.687764] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 7.687795] mmc0: sdhci_msm_check_power_status: request 4 done
[ 7.717799] mmc0: Setting clock at rate 400000 at timing 0
[ 7.717887] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 7.722170] mmc0: sdhci_msm_check_power_status: request 2 done
[ 7.736229] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 12.807757] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 12.807785] mmc0: sdhci_msm_check_power_status: request 4 done
[ 12.813531] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 12.826189] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 17.847757] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 17.847784] mmc0: sdhci_msm_check_power_status: request 4 done
[ 17.853520] mmc0: Setting clock at rate 400000 at timing 0
[ 17.887757] mmc0: SDHCI controller on f9824900.sdhci [f9824900.sdhci] using ADMA 64-bit
[ 17.897018] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 17.902821] mmc0: sdhci_msm_check_power_status: request 2 done
[ 17.916694] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 22.967759] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 22.967787] mmc0: sdhci_msm_check_power_status: request 4 done
[ 22.973533] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 22.986192] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 28.007753] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 28.007777] mmc0: sdhci_msm_check_power_status: request 4 done
[ 28.013515] mmc0: Setting clock at rate 400000 at timing 0
[ 28.021738] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 28.024798] mmc0: sdhci_msm_check_power_status: request 2 done
[ 28.038879] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 33.047769] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 33.047793] mmc0: sdhci_msm_check_power_status: request 4 done
[ 33.053536] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 33.066199] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 38.087755] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 38.087779] mmc0: sdhci_msm_check_power_status: request 4 done
[ 38.093514] mmc0: Setting clock at rate 400000 at timing 0
[ 38.105722] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 38.105748] mmc0: sdhci_msm_check_power_status: request 2 done
[ 38.118881] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 43.127756] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 43.127780] mmc0: sdhci_msm_check_power_status: request 4 done
[ 43.133523] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 43.146184] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 48.167756] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 48.167780] mmc0: sdhci_msm_check_power_status: request 4 done
[ 48.173515] mmc0: Setting clock at rate 400000 at timing 0
[ 48.179810] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 48.184800] mmc0: sdhci_msm_check_power_status: request 2 done
[ 48.198880] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 53.207753] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 53.207777] mmc0: sdhci_msm_check_power_status: request 4 done
[ 53.213518] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 53.226181] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 58.247754] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 58.247777] mmc0: sdhci_msm_check_power_status: request 4 done
[ 58.253513] mmc0: Setting clock at rate 400000 at timing 0
[ 58.259414] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 58.264797] mmc0: sdhci_msm_check_power_status: request 2 done
[ 58.278877] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 63.287754] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 63.287779] mmc0: sdhci_msm_check_power_status: request 4 done
[ 63.293521] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 63.306184] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 68.327764] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 68.327792] mmc0: sdhci_msm_check_power_status: request 4 done
[ 68.333530] mmc0: Setting clock at rate 400000 at timing 0
[ 68.341746] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 68.344812] mmc0: sdhci_msm_check_power_status: request 2 done
[ 68.358891] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 73.367756] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 73.367783] mmc0: sdhci_msm_check_power_status: request 4 done
[ 73.373525] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 73.386186] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 78.407759] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 78.407786] mmc0: sdhci_msm_check_power_status: request 4 done
[ 78.413521] mmc0: Setting clock at rate 400000 at timing 0
[ 78.449337] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 78.449363] mmc0: sdhci_msm_check_power_status: request 2 done
[ 78.462325] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 83.527756] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 83.527781] mmc0: sdhci_msm_check_power_status: request 4 done
[ 83.533524] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 83.546187] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 88.567758] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 88.567786] mmc0: sdhci_msm_check_power_status: request 4 done
[ 88.573522] mmc0: Setting clock at rate 400000 at timing 0
[ 88.611069] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 93.687759] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 93.687788] mmc0: sdhci_msm_check_power_status: request 4 done
[ 93.694461] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 93.699369] mmc0: sdhci_msm_check_power_status: request 2 done
[ 93.713422] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 98.727752] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 98.727779] mmc0: sdhci_msm_check_power_status: request 4 done
[ 98.733523] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=0 ctrl_2=0x8
[ 98.746184] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 103.767770] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 103.767795] mmc0: sdhci_msm_check_power_status: request 4 done
[ 103.773531] mmc0: Setting clock at rate 400000 at timing 0
[ 103.799563] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 103.799589] mmc0: sdhci_msm_check_power_status: request 2 done
[ 103.812552] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 108.887755] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 108.887779] mmc0: sdhci_msm_check_power_status: request 4 done
[ 108.893522] sdhci_msm f9824900.sdhci: mmc0: clock=400000 uhs=9 ctrl_2=0x8
[ 108.906185] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 113.927755] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 113.927778] mmc0: sdhci_msm_check_power_status: request 4 done
[ 113.933513] mmc0: Setting clock at rate 400000 at timing 9
[ 113.939901] mmc0: Setting clock at rate 200000000 at timing 9
[ 113.944801] mmc0: sdhci_msm_check_power_status: request 2 curr_pwr_state 2 curr_io_level 8
[ 113.950642] mmc0: sdhci_msm_check_power_status: request 2 done
[ 113.964587] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 119.047754] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 119.047778] mmc0: sdhci_msm_check_power_status: request 4 done
[ 119.053513] sdhci_msm f9824900.sdhci: mmc0: clock=200000000 uhs=9 ctrl_2=0xb
[ 119.066531] mmc0: sdhci_msm_check_power_status: request 4 curr_pwr_state 2 curr_io_level 8
[ 124.087755] sdhci_msm f9824900.sdhci: mmc0: pwr_irq for req: (4) timed out
[ 124.087779] mmc0: sdhci_msm_check_power_status: request 4 done
[ 124.093514] mmc0: Setting clock at rate 200000000 at timing 9
[ 124.099657] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 0
[ 124.105439] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 1
[ 124.111537] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 2
[ 124.117501] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 3
[ 124.123514] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 4
[ 124.129501] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 5
[ 124.135411] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 6
[ 124.141423] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 7
[ 124.147389] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 8
[ 124.153403] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 9
[ 124.159448] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 10
[ 124.165417] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 11
[ 124.171433] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 12
[ 124.177483] sdhci_msm f9824900.sdhci: mmc0: Found good phase = 13
[ 124.183709] sdhci_msm f9824900.sdhci: mmc0: Setting the tuning phase to 9
[ 124.189943] mmc0: new HS200 MMC card at address 0001
[ 124.198091] mmcblk0: mmc0:0001 MAG2GC 14.6 GiB
[ 124.201538] mmcblk0boot0: mmc0:0001 MAG2GC partition 1 4.00 MiB
[ 124.205695] mmcblk0boot1: mmc0:0001 MAG2GC partition 2 4.00 MiB
[ 124.211637] mmcblk0rpmb: mmc0:0001 MAG2GC partition 3 4.00 MiB, chardev (247:0)
Please let me know if I can assist you with anything additional!
Regards,
Bjorn
Powered by blists - more mailing lists