linux-kernel - [PATCH] ARM: dts: imx28-tx28: fix interrupt flags

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1508762186-17522-1-git-send-email-LW@KARO-electronics.de>
Date:   Mon, 23 Oct 2017 14:36:26 +0200
From:   Lothar Waßmann <LW@...O-electronics.de>
To:     Fabio Estevam <fabio.estevam@....com>,
        Mark Rutland <mark.rutland@....com>,
        Rob Herring <robh+dt@...nel.org>,
        Russell King <linux@...linux.org.uk>,
        Sascha Hauer <kernel@...gutronix.de>,
        Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Cc:     Lothar Waßmann <LW@...O-electronics.de>
Subject: [PATCH] ARM: dts: imx28-tx28: fix interrupt flags

Some interrupts properties are given '0' as the flags argument.
Change them to use the appropriate interrupt flags.

Signed-off-by: Lothar Waßmann <LW@...O-electronics.de>
---
 arch/arm/boot/dts/imx28-tx28.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/imx28-tx28.dts b/arch/arm/boot/dts/imx28-tx28.dts
index 211e67d..52d99b4 100644
--- a/arch/arm/boot/dts/imx28-tx28.dts
+++ b/arch/arm/boot/dts/imx28-tx28.dts
@@ -329,7 +329,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_pca9554_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <28 0>;
+		interrupts = <28 IRQ_TYPE_NONE>;
 		gpio-controller;
 		#gpio-cells = <2>;
 		interrupt-controller;
@@ -353,7 +353,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&tx28_tsc2007_pins>;
 		interrupt-parent = <&gpio3>;
-		interrupts = <20 0>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
 		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
 		ti,x-plate-ohms = /bits/ 16 <660>;
 	};
-- 
2.1.4