[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6bbb6ef6-41bc-a30b-8baf-80f765320d97@skidata.com>
Date: Mon, 23 Oct 2017 23:47:02 +0200
From: Richard Leitner <richard.leitner@...data.com>
To: Serge Semin <fancer.lancer@...il.com>,
<gregkh@...uxfoundation.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>
CC: <Sergey.Semin@...latforms.ru>, <linux-usb@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 02/10 v3] usb: usb251xb: Add USB2517i specific struct and
IDs
Hi,
please see comments below for some nit-picks.
On 10/22/2017 10:38 PM, Serge Semin wrote:
> There are USB2517 and USB2517i hubs, which have almost the same
> registers space as already supported USB251xBi series. The difference
> it in DIDs and in a few functions. This patch adds the USB2517/i data
> structures to the driver, so it would have different setting depending
> on the device discovered on i2c-bus.
>
> Signed-off-by: Serge Semin <fancer.lancer@...il.com>
> ---
> drivers/usb/misc/Kconfig | 4 ++--
> drivers/usb/misc/usb251xb.c | 23 +++++++++++++++++++++--
> 2 files changed, 23 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
> index 37dd1c018..27b9fcbdf 100644
> --- a/drivers/usb/misc/Kconfig
> +++ b/drivers/usb/misc/Kconfig
> @@ -247,8 +247,8 @@ config USB_HUB_USB251XB
> depends on I2C
> help
> This option enables support for configuration via SMBus of the
> - Microchip USB251xB/xBi USB 2.0 Hub Controller series.
> - Configuration parameters may be set in devicetree or platform data.
> + Microchip USB251x/xBi USB 2.0 Hub Controller series. Configuration
> + parameters may be set in devicetree or platform data.
Here you have "USB251x/xBi"...
> Say Y or M here if you need to configure such a device via SMBus.
>
> config USB_HSIC_USB3503
> diff --git a/drivers/usb/misc/usb251xb.c b/drivers/usb/misc/usb251xb.c
> index 91f66d68b..22c32ea3f 100644
> --- a/drivers/usb/misc/usb251xb.c
> +++ b/drivers/usb/misc/usb251xb.c
...
> @@ -82,7 +83,7 @@
>
> #define USB251XB_ADDR_PRODUCT_STRING_LEN 0x14
> #define USB251XB_ADDR_PRODUCT_STRING 0x54
> -#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi"
> +#define USB251XB_DEF_PRODUCT_STRING "USB251xB/xBi/7i"
but here you have "USB251xB/xBi/7i"...
>
> #define USB251XB_ADDR_SERIAL_STRING_LEN 0x15
> #define USB251XB_ADDR_SERIAL_STRING 0x92
...
> @@ -590,5 +609,5 @@ static struct i2c_driver usb251xb_i2c_driver = {
> module_i2c_driver(usb251xb_i2c_driver);
>
> MODULE_AUTHOR("Richard Leitner <richard.leitner@...data.com>");
> -MODULE_DESCRIPTION("USB251xB/xBi USB 2.0 Hub Controller Driver");
> +MODULE_DESCRIPTION("USB251x/xBi USB 2.0 Hub Controller Driver");
... and here again "USB251x/xBi"...
> MODULE_LICENSE("GPL");
>
I'd prefer to use just one "name" for the driver. If you be precise that
would be "USB251xB/xBi/xi". But that seems a bit overloaded to me. AFAIK
the "B" and "i" prepended to the type have no affect on the I2C
interface/register map, so maybe "USB251x" would be sufficient?
kind regards,
Richard.L
Powered by blists - more mailing lists