linux-kernel - [PATCH 1/3] Documentation: DT: Add Cygnus usb phy binding

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <1508819822-29956-2-git-send-email-raveendra.padasalagi@broadcom.com>
Date:   Tue, 24 Oct 2017 10:07:00 +0530
From:   Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>
To:     Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Kishon Vijay Abraham I <kishon@...com>,
        Russell King <linux@...linux.org.uk>,
        Scott Branden <sbranden@...adcom.com>,
        Ray Jui <rjui@...adcom.com>,
        Srinath Mannam <srinath.mannam@...adcom.com>,
        Jon Mason <jonmason@...adcom.com>,
        Florian Fainelli <f.fainelli@...il.com>,
        Yoshihiro Shimoda <yoshihiro.shimoda.uh@...esas.com>,
        Raviteja Garimella <raviteja.garimella@...adcom.com>,
        Rafal Milecki <rafal@...ecki.pl>,
        Arnd Bergmann <arnd@...db.de>,
        Viresh Kumar <viresh.kumar@...aro.org>,
        Jaehoon Chung <jh80.chung@...sung.com>
Cc:     devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        linux-kernel@...r.kernel.org,
        bcm-kernel-feedback-list@...adcom.com,
        Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>
Subject: [PATCH 1/3] Documentation: DT: Add Cygnus usb phy binding

Add devicetree binding document for broadcom's
Cygnus SoC specific usb phy controller driver.

Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@...adcom.com>
---
 .../bindings/phy/brcm,cygnus-usb-phy.txt           | 101 +++++++++++++++++++++
 1 file changed, 101 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt

diff --git a/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
new file mode 100644
index 0000000..2d99fea
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/brcm,cygnus-usb-phy.txt
@@ -0,0 +1,101 @@
+BROADCOM CYGNUS USB PHY
+
+Required Properties:
+- compatible:  brcm,cygnus-usb-phy
+- reg : the register start address and length for crmu_usbphy_aon_ctrl,
+  cdru usb phy control and reset registers, usb host idm registers,
+  usb device idm registers.
+- reg-names: a list of the names corresponding to the previous register
+  ranges. Should contain "crmu-usbphy-aon-ctrl", "cdru-usbphy",
+  "usb2h-idm", "usb2d-idm".
+- address-cells: should be 1
+- size-cells: should be 0
+
+Sub-nodes:
+  Each port's PHY should be represented as a sub-node.
+
+Sub-nodes required properties:
+- reg: the PHY number
+- #phy-cells must be 1
+  The node that uses the phy must provide 1 integer argument specifying
+  port number.
+
+Optional Properties:
+- vbus-p#-supply : The regulator for vbus out control for the host
+  functionality enabled ports.
+- vbus-gpios: vbus gpio binding
+  This is mandatory for port 2, as port 2 is used as dual role phy.
+  Based on the vbus and id values device or host role is determined
+  for phy 2.
+
+- extcon: extcon phandle
+  This is mandatory for port 2,  as port 2 is used as dual role phy.
+  extcon should be phandle to external usb gpio module which provide
+  device or host role notifications based on the ID and VBUS gpio's state.
+
+
+Refer to phy/phy-bindings.txt for the generic PHY binding properties
+
+NOTE: port 0 and port 1 are host only and port 2 is dual role port.
+
+Example of phy :
+	usbphy: phy@...1c028 {
+		compatible = "brcm,cygnus-usb-phy";
+		reg = <0x0301c028 0x4>,
+		      <0x0301d1b4 0x5c>,
+		      <0x18115000 0xa00>,
+		      <0x18111000 0xa00>;
+		reg-names = "crmu-usbphy-aon-ctrl", "cdru-usbphy",
+			    "usb2h-idm", "usb2d-idm";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbphy0: usb-phy@0 {
+			reg = <0>;
+			#phy-cells = <1>;
+		};
+
+		usbphy1: usb-phy@1 {
+			reg = <1>;
+			#phy-cells = <1>;
+		};
+
+		usbphy2: usb-phy@2 {
+			reg = <2>;
+			#phy-cells = <1>;
+			extcon = <&extcon_usb>;
+		};
+	};
+
+	extcon_usb: extcon_usb {
+		compatible = "linux,extcon-usb-gpio";
+		vbus-gpio = <&gpio_asiu 121 0>;
+		id-gpio = <&gpio_asiu 122 0>;
+		status = "okay";
+	};
+
+
+Example of node using the phy:
+
+	/* This nodes declares all three ports, port 0
+	and port 1 are host and port 2 is device */
+
+	ehci0: usb@...48000 {
+		compatible = "generic-ehci";
+		reg = <0x18048000 0x100>;
+		interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usbphy0 0 &usbphy1 1 &usbphy2 2>;
+		phy-names = "usbp0","usbp1","usbp2";
+		status = "okay";
+	};
+
+	/* This node declares port 2 phy
+	and configures it for device */
+
+	usbd_udc_dwc1: usbd_udc_dwc@...4c000 {
+		compatible = "iproc-udc";
+		reg = <0x1804c000 0x2000>;
+		interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&usbphy2 2>;
+		phy-names = "usbdrd";
+	};
-- 
1.9.1