| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20171024175714.15840-3-clabbe.montjoie@gmail.com>
Date: Tue, 24 Oct 2017 19:57:06 +0200
From: Corentin Labbe <clabbe.montjoie@...il.com>
To: robh+dt@...nel.org, mark.rutland@....com,
maxime.ripard@...e-electrons.com, wens@...e.org,
linux@...linux.org.uk, catalin.marinas@....com,
will.deacon@....com, peppe.cavallaro@...com,
alexandre.torgue@...com, andrew@...n.ch, f.fainelli@...il.com
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
Corentin Labbe <clabbe.montjoie@...il.com>
Subject: [PATCH v9 02/10] dt-bindings: net: dwmac-sun8i: update documentation about integrated PHY
This patch add documentation about the MDIO switch used on sun8i-h3-emac
for integrated PHY.
Signed-off-by: Corentin Labbe <clabbe.montjoie@...il.com>
---
.../devicetree/bindings/net/dwmac-sun8i.txt | 145 +++++++++++++++++++--
1 file changed, 133 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
index 725f3b187886..2600ce9ad3cc 100644
--- a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
+++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt
@@ -4,18 +4,18 @@ This device is a platform glue layer for stmmac.
Please see stmmac.txt for the other unchanged properties.
Required properties:
-- compatible: should be one of the following string:
+- compatible: must be one of the following string:
"allwinner,sun8i-a83t-emac"
"allwinner,sun8i-h3-emac"
"allwinner,sun8i-v3s-emac"
"allwinner,sun50i-a64-emac"
- reg: address and length of the register for the device.
- interrupts: interrupt for the device
-- interrupt-names: should be "macirq"
+- interrupt-names: must be "macirq"
- clocks: A phandle to the reference clock for this device
-- clock-names: should be "stmmaceth"
+- clock-names: must be "stmmaceth"
- resets: A phandle to the reset control for this device
-- reset-names: should be "stmmaceth"
+- reset-names: must be "stmmaceth"
- phy-mode: See ethernet.txt
- phy-handle: See ethernet.txt
- #address-cells: shall be 1
@@ -39,23 +39,42 @@ Optional properties for the following compatibles:
- allwinner,leds-active-low: EPHY LEDs are active low
Required child node of emac:
-- mdio bus node: should be named mdio
+- mdio bus node: with compatible "snps,dwmac-mdio"
Required properties of the mdio node:
- #address-cells: shall be 1
- #size-cells: shall be 0
-The device node referenced by "phy" or "phy-handle" should be a child node
+The device node referenced by "phy" or "phy-handle" must be a child node
of the mdio node. See phy.txt for the generic PHY bindings.
-Required properties of the phy node with the following compatibles:
+The following compatibles require that the emac node have a mdio-mux child
+node called "mdio-mux":
+ - "allwinner,sun8i-h3-emac"
+ - "allwinner,sun8i-v3s-emac":
+Required properties for the mdio-mux node:
+ - compatible = "allwinner,sun8i-h3-mdio-mux"
+ - mdio-parent-bus: a phandle to EMAC mdio
+ - one child mdio for the integrated mdio with the compatible
+ "allwinner,sun8i-h3-mdio-internal"
+ - one child mdio for the external mdio if present (V3s have none)
+Required properties for the mdio-mux children node:
+ - reg: 1 for internal MDIO bus, 2 for external MDIO bus
+
+The following compatibles require a PHY node representing the integrated
+PHY, under the integrated MDIO bus node if an mdio-mux node is used:
- "allwinner,sun8i-h3-emac",
- "allwinner,sun8i-v3s-emac":
+
+Additional information regarding generic multiplexer properties can be found
+at Documentation/devicetree/bindings/net/mdio-mux.txt
+
+Required properties of the integrated phy node:
- clocks: a phandle to the reference clock for the EPHY
- resets: a phandle to the reset control for the EPHY
+- Must be a child of the integrated mdio
-Example:
-
+Example with integrated PHY:
emac: ethernet@...b000 {
compatible = "allwinner,sun8i-h3-emac";
syscon = <&syscon>;
@@ -72,13 +91,115 @@ emac: ethernet@...b000 {
phy-handle = <&int_mii_phy>;
phy-mode = "mii";
allwinner,leds-active-low;
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio0>;
+
+ int_mdio: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ phy-is-integrated;
+ };
+ };
+ ext_mdio: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+ };
+};
+
+Example with external PHY:
+emac: ethernet@...b000 {
+ compatible = "allwinner,sun8i-h3-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+ allwinner,leds-active-low;
+
+ mdio0: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+ };
+
+ mdio-mux {
+ compatible = "mdio-mux", "allwinner,sun8i-h3-mdio-mux";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ mdio-parent-bus = <&mdio0>;
+
+ int_mdio: mdio@1 {
+ compatible = "allwinner,sun8i-h3-mdio-internal";
+ reg = <1>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ int_mii_phy: ethernet-phy@1 {
+ reg = <1>;
+ clocks = <&ccu CLK_BUS_EPHY>;
+ resets = <&ccu RST_BUS_EPHY>;
+ };
+ };
+ ext_mdio: mdio@2 {
+ reg = <2>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ ext_rgmii_phy: ethernet-phy@1 {
+ reg = <1>;
+ };
+ }:
+ };
+};
+
+Example with SoC without integrated PHY
+
+emac: ethernet@...b000 {
+ compatible = "allwinner,sun8i-a83t-emac";
+ syscon = <&syscon>;
+ reg = <0x01c0b000 0x104>;
+ interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "macirq";
+ resets = <&ccu RST_BUS_EMAC>;
+ reset-names = "stmmaceth";
+ clocks = <&ccu CLK_BUS_EMAC>;
+ clock-names = "stmmaceth";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ phy-handle = <&ext_rgmii_phy>;
+ phy-mode = "rgmii";
+
mdio: mdio {
+ compatible = "snps,dwmac-mdio";
#address-cells = <1>;
#size-cells = <0>;
- int_mii_phy: ethernet-phy@1 {
+ ext_rgmii_phy: ethernet-phy@1 {
reg = <1>;
- clocks = <&ccu CLK_BUS_EPHY>;
- resets = <&ccu RST_BUS_EPHY>;
};
};
};
--
2.13.6
Powered by blists - more mailing lists