lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list] 
Message-Id: <1508903463-7254-1-git-send-email-nickey.yang@rock-chips.com>
Date:   Wed, 25 Oct 2017 11:50:58 +0800
From:   Nickey Yang <nickey.yang@...k-chips.com>
To:     mark.yao@...k-chips.com, robh+dt@...nel.org, heiko@...ech.de,
        mark.rutland@....com, airlied@...ux.ie
Cc:     linux-kernel@...r.kernel.org, dri-devel@...ts.freedesktop.org,
        linux-rockchip@...ts.infradead.org, seanpaul@...omium.org,
        briannorris@...omium.org, hl@...k-chips.com, zyw@...k-chips.comg,
        xbl@...k-chips.com, nickey.yang@...k-chips.com
Subject: [PATCH v3 1/6] drm/rockchip/dsi: Define and use macros for PHY register addresses

Replace the hardcoded register address numerical values with macros to
clarify the code.

Signed-off-by: Nickey Yang <nickey.yang@...k-chips.com>
---
 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 129 ++++++++++++++++++++++-----------
 1 file changed, 85 insertions(+), 44 deletions(-)

diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
index b15755b..95ce253 100644
--- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
+++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c
@@ -254,6 +254,28 @@
 #define DW_MIPI_NEEDS_PHY_CFG_CLK	BIT(0)
 #define DW_MIPI_NEEDS_GRF_CLK		BIT(1)
 
+#define PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL	0x10
+#define PLL_CP_CONTROL_PLL_LOCK_BYPASS	0x11
+#define PLL_LPF_AND_CP_CONTROL	0x12
+#define PLL_INPUT_DIVIDER_RATIO	0x17
+#define PLL_LOOP_DIVIDER_RATIO	0x18
+#define PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL	0x19
+#define BANDGAP_AND_BIAS_CONTROL	0x20
+#define TERMINATION_RESISTER_CONTROL	0x21
+#define AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY	0x22
+#define HS_RX_CONTROL_OF_LANE_0	0x44
+#define HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL	0x60
+#define HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL	0x61
+#define HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL	0x62
+#define HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL	0x63
+#define HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL	0x64
+#define HS_TX_CLOCK_LANE_POST_TIME_CONTROL	0x65
+#define HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL	0x70
+#define HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL	0x71
+#define HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL	0x72
+#define HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL	0x73
+#define HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL	0x74
+
 enum {
 	BANDGAP_97_07,
 	BANDGAP_98_05,
@@ -447,53 +469,72 @@ static int dw_mipi_dsi_phy_init(struct dw_mipi_dsi *dsi)
 		return ret;
 	}
 
-	dw_mipi_dsi_phy_write(dsi, 0x10, BYPASS_VCO_RANGE |
-					 VCO_RANGE_CON_SEL(vco) |
-					 VCO_IN_CAP_CON_LOW |
-					 REF_BIAS_CUR_SEL);
-
-	dw_mipi_dsi_phy_write(dsi, 0x11, CP_CURRENT_3MA);
-	dw_mipi_dsi_phy_write(dsi, 0x12, CP_PROGRAM_EN | LPF_PROGRAM_EN |
-					 LPF_RESISTORS_20_KOHM);
-
-	dw_mipi_dsi_phy_write(dsi, 0x44, HSFREQRANGE_SEL(testdin));
-
-	dw_mipi_dsi_phy_write(dsi, 0x17, INPUT_DIVIDER(dsi->input_div));
-	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_LOW_SEL(dsi->feedback_div) |
-					 LOW_PROGRAM_EN);
-	dw_mipi_dsi_phy_write(dsi, 0x18, LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
-					 HIGH_PROGRAM_EN);
-	dw_mipi_dsi_phy_write(dsi, 0x19, PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
-
-	dw_mipi_dsi_phy_write(dsi, 0x22, LOW_PROGRAM_EN |
-					 BIASEXTR_SEL(BIASEXTR_127_7));
-	dw_mipi_dsi_phy_write(dsi, 0x22, HIGH_PROGRAM_EN |
-					 BANDGAP_SEL(BANDGAP_96_10));
-
-	dw_mipi_dsi_phy_write(dsi, 0x20, POWER_CONTROL | INTERNAL_REG_CURRENT |
-					 BIAS_BLOCK_ON | BANDGAP_ON);
-
-	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_LOW | TER_CAL_DONE |
-					 SETRD_MAX | TER_RESISTORS_ON);
-	dw_mipi_dsi_phy_write(dsi, 0x21, TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
-					 SETRD_MAX | POWER_MANAGE |
-					 TER_RESISTORS_ON);
-
-	dw_mipi_dsi_phy_write(dsi, 0x60, TLP_PROGRAM_EN | ns2bc(dsi, 500));
-	dw_mipi_dsi_phy_write(dsi, 0x61, THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
-	dw_mipi_dsi_phy_write(dsi, 0x62, THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
-	dw_mipi_dsi_phy_write(dsi, 0x63, THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
-	dw_mipi_dsi_phy_write(dsi, 0x64, BIT(5) | ns2bc(dsi, 100));
-	dw_mipi_dsi_phy_write(dsi, 0x65, BIT(5) | (ns2bc(dsi, 60) + 7));
-
-	dw_mipi_dsi_phy_write(dsi, 0x70, TLP_PROGRAM_EN | ns2bc(dsi, 500));
-	dw_mipi_dsi_phy_write(dsi, 0x71,
+	dw_mipi_dsi_phy_write(dsi, PLL_BIAS_CUR_SEL_CAP_VCO_CONTROL,
+			      BYPASS_VCO_RANGE |
+			      VCO_RANGE_CON_SEL(vco) |
+			      VCO_IN_CAP_CON_LOW |
+			      REF_BIAS_CUR_SEL);
+
+	dw_mipi_dsi_phy_write(dsi, PLL_CP_CONTROL_PLL_LOCK_BYPASS,
+			      CP_CURRENT_3MA);
+	dw_mipi_dsi_phy_write(dsi, PLL_LPF_AND_CP_CONTROL,
+			      CP_PROGRAM_EN | LPF_PROGRAM_EN |
+			      LPF_RESISTORS_20_KOHM);
+
+	dw_mipi_dsi_phy_write(dsi, HS_RX_CONTROL_OF_LANE_0,
+			      HSFREQRANGE_SEL(testdin));
+
+	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_DIVIDER_RATIO,
+			      INPUT_DIVIDER(dsi->input_div));
+	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+			      LOOP_DIV_LOW_SEL(dsi->feedback_div) |
+			      LOW_PROGRAM_EN);
+	dw_mipi_dsi_phy_write(dsi, PLL_LOOP_DIVIDER_RATIO,
+			      LOOP_DIV_HIGH_SEL(dsi->feedback_div) |
+			      HIGH_PROGRAM_EN);
+	dw_mipi_dsi_phy_write(dsi, PLL_INPUT_AND_LOOP_DIVIDER_RATIOS_CONTROL,
+			      PLL_LOOP_DIV_EN | PLL_INPUT_DIV_EN);
+
+	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+			      LOW_PROGRAM_EN | BIASEXTR_SEL(BIASEXTR_127_7));
+	dw_mipi_dsi_phy_write(dsi, AFE_BIAS_BANDGAP_ANALOG_PROGRAMMABILITY,
+			      HIGH_PROGRAM_EN | BANDGAP_SEL(BANDGAP_96_10));
+
+	dw_mipi_dsi_phy_write(dsi, BANDGAP_AND_BIAS_CONTROL,
+			      POWER_CONTROL | INTERNAL_REG_CURRENT |
+			      BIAS_BLOCK_ON | BANDGAP_ON);
+
+	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+			      TER_RESISTOR_LOW | TER_CAL_DONE |
+			      SETRD_MAX | TER_RESISTORS_ON);
+	dw_mipi_dsi_phy_write(dsi, TERMINATION_RESISTER_CONTROL,
+			      TER_RESISTOR_HIGH | LEVEL_SHIFTERS_ON |
+			      SETRD_MAX | POWER_MANAGE |
+			      TER_RESISTORS_ON);
+
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_REQUEST_STATE_TIME_CONTROL,
+			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_PREPARE_STATE_TIME_CONTROL,
+			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 40));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_HS_ZERO_STATE_TIME_CONTROL,
+			      THS_ZERO_PROGRAM_EN | ns2bc(dsi, 300));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_TRAIL_STATE_TIME_CONTROL,
+			      THS_PRE_PROGRAM_EN | ns2ui(dsi, 100));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_EXIT_STATE_TIME_CONTROL,
+			      BIT(5) | ns2bc(dsi, 100));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_CLOCK_LANE_POST_TIME_CONTROL,
+			      BIT(5) | (ns2bc(dsi, 60) + 7));
+
+	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_REQUEST_STATE_TIME_CONTROL,
+			      TLP_PROGRAM_EN | ns2bc(dsi, 500));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_PREPARE_STATE_TIME_CONTROL,
 			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 50) + 5));
-	dw_mipi_dsi_phy_write(dsi, 0x72,
+	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_HS_ZERO_STATE_TIME_CONTROL,
 			      THS_ZERO_PROGRAM_EN | (ns2bc(dsi, 140) + 2));
-	dw_mipi_dsi_phy_write(dsi, 0x73,
+	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_TRAIL_STATE_TIME_CONTROL,
 			      THS_PRE_PROGRAM_EN | (ns2ui(dsi, 60) + 8));
-	dw_mipi_dsi_phy_write(dsi, 0x74, BIT(5) | ns2bc(dsi, 100));
+	dw_mipi_dsi_phy_write(dsi, HS_TX_DATA_LANE_EXIT_STATE_TIME_CONTROL,
+			      BIT(5) | ns2bc(dsi, 100));
 
 	dsi_write(dsi, DSI_PHY_RSTZ, PHY_ENFORCEPLL | PHY_ENABLECLK |
 				     PHY_UNRSTZ | PHY_UNSHUTDOWNZ);
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ