| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171031150443.k42bmeaucfwayhiv@rfolt0960.corp.atmel.com>
Date: Tue, 31 Oct 2017 16:04:43 +0100
From: Ludovic Desroches <ludovic.desroches@...rochip.com>
To: Juergen Fitschen <me@....yt>
CC: Ludovic Desroches <ludovic.desroches@...rochip.com>,
Wolfram Sang <wsa@...-dreams.de>, <linux-i2c@...r.kernel.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH RFC 2/4] i2c: at91: split driver into core and master file
On Fri, Oct 27, 2017 at 05:11:41PM +0200, Juergen Fitschen wrote:
> The single file i2c-at91.c has been split into core code (i2c-at91-core.c)
> and master mode specific code (i2c-at91-master.c). This should enhance
> maintainability and reduce ifdeffery for slave mode related code.
>
> The code itself hasn't been touched. Shared functions only had to be made
> non-static. Furthermore, includes have been cleaned up.
>
> Signed-off-by: Juergen Fitschen <me@....yt>
Acked-by: Ludovic Desroches <ludovic.desroches@...rochip.com>
> ---
> MAINTAINERS | 3 +-
> drivers/i2c/busses/Makefile | 1 +
> drivers/i2c/busses/i2c-at91-core.c | 373 ++++++++++
> drivers/i2c/busses/i2c-at91-master.c | 804 ++++++++++++++++++++++
> drivers/i2c/busses/i2c-at91.c | 1263 ----------------------------------
> drivers/i2c/busses/i2c-at91.h | 151 ++++
> 6 files changed, 1331 insertions(+), 1264 deletions(-)
> create mode 100644 drivers/i2c/busses/i2c-at91-core.c
> create mode 100644 drivers/i2c/busses/i2c-at91-master.c
> delete mode 100644 drivers/i2c/busses/i2c-at91.c
> create mode 100644 drivers/i2c/busses/i2c-at91.h
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index d85c089..b697db8 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -2341,7 +2341,8 @@ ATMEL I2C DRIVER
> M: Ludovic Desroches <ludovic.desroches@...rochip.com>
> L: linux-i2c@...r.kernel.org
> S: Supported
> -F: drivers/i2c/busses/i2c-at91.c
> +F: drivers/i2c/busses/i2c-at91.h
> +F: drivers/i2c/busses/i2c-at91-*.c
>
> ATMEL ISI DRIVER
> M: Ludovic Desroches <ludovic.desroches@...rochip.com>
> diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
> index 47f3ac9..2a79c3d 100644
> --- a/drivers/i2c/busses/Makefile
> +++ b/drivers/i2c/busses/Makefile
> @@ -33,6 +33,7 @@ obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
> obj-$(CONFIG_I2C_ALTERA) += i2c-altera.o
> obj-$(CONFIG_I2C_ASPEED) += i2c-aspeed.o
> obj-$(CONFIG_I2C_AT91) += i2c-at91.o
> +i2c-at91-objs := i2c-at91-core.o i2c-at91-master.o
> obj-$(CONFIG_I2C_AU1550) += i2c-au1550.o
> obj-$(CONFIG_I2C_AXXIA) += i2c-axxia.o
> obj-$(CONFIG_I2C_BCM2835) += i2c-bcm2835.o
> diff --git a/drivers/i2c/busses/i2c-at91-core.c b/drivers/i2c/busses/i2c-at91-core.c
> new file mode 100644
> index 0000000..4fed72d
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-at91-core.c
> @@ -0,0 +1,373 @@
> +/*
> + * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
> + *
> + * Copyright (C) 2011 Weinmann Medical GmbH
> + * Author: Nikolaus Voss <n.voss@...nmann.de>
> + *
> + * Evolved from original work by:
> + * Copyright (C) 2004 Rick Bronson
> + * Converted to 2.6 by Andrew Victor <andrew@...people.com>
> + *
> + * Borrowed heavily from original work by:
> + * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/io.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
> +
> +#include "i2c-at91.h"
> +
> +unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
> +{
> + return readl_relaxed(dev->base + reg);
> +}
> +
> +void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
> +{
> + writel_relaxed(val, dev->base + reg);
> +}
> +
> +void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
> +{
> + at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
> +}
> +
> +void at91_twi_irq_save(struct at91_twi_dev *dev)
> +{
> + dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
> + at91_disable_twi_interrupts(dev);
> +}
> +
> +void at91_twi_irq_restore(struct at91_twi_dev *dev)
> +{
> + at91_twi_write(dev, AT91_TWI_IER, dev->imr);
> +}
> +
> +void at91_init_twi_bus(struct at91_twi_dev *dev)
> +{
> + at91_disable_twi_interrupts(dev);
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
> +
> + at91_init_twi_bus_master(dev);
> +}
> +
> +static struct at91_twi_pdata at91rm9200_config = {
> + .clk_max_div = 5,
> + .clk_offset = 3,
> + .has_unre_flag = true,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static struct at91_twi_pdata at91sam9261_config = {
> + .clk_max_div = 5,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static struct at91_twi_pdata at91sam9260_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static struct at91_twi_pdata at91sam9g20_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static struct at91_twi_pdata at91sam9g10_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static const struct platform_device_id at91_twi_devtypes[] = {
> + {
> + .name = "i2c-at91rm9200",
> + .driver_data = (unsigned long) &at91rm9200_config,
> + }, {
> + .name = "i2c-at91sam9261",
> + .driver_data = (unsigned long) &at91sam9261_config,
> + }, {
> + .name = "i2c-at91sam9260",
> + .driver_data = (unsigned long) &at91sam9260_config,
> + }, {
> + .name = "i2c-at91sam9g20",
> + .driver_data = (unsigned long) &at91sam9g20_config,
> + }, {
> + .name = "i2c-at91sam9g10",
> + .driver_data = (unsigned long) &at91sam9g10_config,
> + }, {
> + /* sentinel */
> + }
> +};
> +
> +#if defined(CONFIG_OF)
> +static struct at91_twi_pdata at91sam9x5_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = false,
> +};
> +
> +static struct at91_twi_pdata sama5d4_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = false,
> + .has_alt_cmd = false,
> + .has_hold_field = true,
> +};
> +
> +static struct at91_twi_pdata sama5d2_config = {
> + .clk_max_div = 7,
> + .clk_offset = 4,
> + .has_unre_flag = true,
> + .has_alt_cmd = true,
> + .has_hold_field = true,
> +};
> +
> +static const struct of_device_id atmel_twi_dt_ids[] = {
> + {
> + .compatible = "atmel,at91rm9200-i2c",
> + .data = &at91rm9200_config,
> + } , {
> + .compatible = "atmel,at91sam9260-i2c",
> + .data = &at91sam9260_config,
> + } , {
> + .compatible = "atmel,at91sam9261-i2c",
> + .data = &at91sam9261_config,
> + } , {
> + .compatible = "atmel,at91sam9g20-i2c",
> + .data = &at91sam9g20_config,
> + } , {
> + .compatible = "atmel,at91sam9g10-i2c",
> + .data = &at91sam9g10_config,
> + }, {
> + .compatible = "atmel,at91sam9x5-i2c",
> + .data = &at91sam9x5_config,
> + }, {
> + .compatible = "atmel,sama5d4-i2c",
> + .data = &sama5d4_config,
> + }, {
> + .compatible = "atmel,sama5d2-i2c",
> + .data = &sama5d2_config,
> + }, {
> + /* sentinel */
> + }
> +};
> +MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
> +#endif
> +
> +static struct at91_twi_pdata *at91_twi_get_driver_data(
> + struct platform_device *pdev)
> +{
> + if (pdev->dev.of_node) {
> + const struct of_device_id *match;
> + match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
> + if (!match)
> + return NULL;
> + return (struct at91_twi_pdata *)match->data;
> + }
> + return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
> +}
> +
> +static int at91_twi_probe(struct platform_device *pdev)
> +{
> + struct at91_twi_dev *dev;
> + struct resource *mem;
> + int rc;
> + u32 phy_addr;
> +
> + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> + if (!dev)
> + return -ENOMEM;
> +
> + dev->dev = &pdev->dev;
> +
> + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> + if (!mem)
> + return -ENODEV;
> + phy_addr = mem->start;
> +
> + dev->pdata = at91_twi_get_driver_data(pdev);
> + if (!dev->pdata)
> + return -ENODEV;
> +
> + dev->base = devm_ioremap_resource(&pdev->dev, mem);
> + if (IS_ERR(dev->base))
> + return PTR_ERR(dev->base);
> +
> + dev->irq = platform_get_irq(pdev, 0);
> + if (dev->irq < 0)
> + return dev->irq;
> +
> + platform_set_drvdata(pdev, dev);
> +
> + dev->clk = devm_clk_get(dev->dev, NULL);
> + if (IS_ERR(dev->clk)) {
> + dev_err(dev->dev, "no clock defined\n");
> + return -ENODEV;
> + }
> + clk_prepare_enable(dev->clk);
> +
> + snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
> + i2c_set_adapdata(&dev->adapter, dev);
> + dev->adapter.owner = THIS_MODULE;
> + dev->adapter.class = I2C_CLASS_DEPRECATED;
> + dev->adapter.dev.parent = dev->dev;
> + dev->adapter.nr = pdev->id;
> + dev->adapter.timeout = AT91_I2C_TIMEOUT;
> + dev->adapter.dev.of_node = pdev->dev.of_node;
> +
> + rc = at91_twi_probe_master(pdev, phy_addr, dev);
> + if (rc)
> + return rc;
> +
> + at91_init_twi_bus(dev);
> +
> + pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
> + pm_runtime_use_autosuspend(dev->dev);
> + pm_runtime_set_active(dev->dev);
> + pm_runtime_enable(dev->dev);
> +
> + rc = i2c_add_numbered_adapter(&dev->adapter);
> + if (rc) {
> + clk_disable_unprepare(dev->clk);
> +
> + pm_runtime_disable(dev->dev);
> + pm_runtime_set_suspended(dev->dev);
> +
> + return rc;
> + }
> +
> + dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
> + at91_twi_read(dev, AT91_TWI_VER));
> + return 0;
> +}
> +
> +static int at91_twi_remove(struct platform_device *pdev)
> +{
> + struct at91_twi_dev *dev = platform_get_drvdata(pdev);
> +
> + i2c_del_adapter(&dev->adapter);
> + clk_disable_unprepare(dev->clk);
> +
> + pm_runtime_disable(dev->dev);
> + pm_runtime_set_suspended(dev->dev);
> +
> + return 0;
> +}
> +
> +#ifdef CONFIG_PM
> +
> +static int at91_twi_runtime_suspend(struct device *dev)
> +{
> + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> +
> + clk_disable_unprepare(twi_dev->clk);
> +
> + pinctrl_pm_select_sleep_state(dev);
> +
> + return 0;
> +}
> +
> +static int at91_twi_runtime_resume(struct device *dev)
> +{
> + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> +
> + pinctrl_pm_select_default_state(dev);
> +
> + return clk_prepare_enable(twi_dev->clk);
> +}
> +
> +static int at91_twi_suspend_noirq(struct device *dev)
> +{
> + if (!pm_runtime_status_suspended(dev))
> + at91_twi_runtime_suspend(dev);
> +
> + return 0;
> +}
> +
> +static int at91_twi_resume_noirq(struct device *dev)
> +{
> + struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> + int ret;
> +
> + if (!pm_runtime_status_suspended(dev)) {
> + ret = at91_twi_runtime_resume(dev);
> + if (ret)
> + return ret;
> + }
> +
> + pm_runtime_mark_last_busy(dev);
> + pm_request_autosuspend(dev);
> +
> + at91_init_twi_bus(twi_dev);
> +
> + return 0;
> +}
> +
> +static const struct dev_pm_ops at91_twi_pm = {
> + .suspend_noirq = at91_twi_suspend_noirq,
> + .resume_noirq = at91_twi_resume_noirq,
> + .runtime_suspend = at91_twi_runtime_suspend,
> + .runtime_resume = at91_twi_runtime_resume,
> +};
> +
> +#define at91_twi_pm_ops (&at91_twi_pm)
> +#else
> +#define at91_twi_pm_ops NULL
> +#endif
> +
> +static struct platform_driver at91_twi_driver = {
> + .probe = at91_twi_probe,
> + .remove = at91_twi_remove,
> + .id_table = at91_twi_devtypes,
> + .driver = {
> + .name = "at91_i2c",
> + .of_match_table = of_match_ptr(atmel_twi_dt_ids),
> + .pm = at91_twi_pm_ops,
> + },
> +};
> +
> +static int __init at91_twi_init(void)
> +{
> + return platform_driver_register(&at91_twi_driver);
> +}
> +
> +static void __exit at91_twi_exit(void)
> +{
> + platform_driver_unregister(&at91_twi_driver);
> +}
> +
> +subsys_initcall(at91_twi_init);
> +module_exit(at91_twi_exit);
> +
> +MODULE_AUTHOR("Nikolaus Voss <n.voss@...nmann.de>");
> +MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
> +MODULE_LICENSE("GPL");
> +MODULE_ALIAS("platform:at91_i2c");
> diff --git a/drivers/i2c/busses/i2c-at91-master.c b/drivers/i2c/busses/i2c-at91-master.c
> new file mode 100644
> index 0000000..6dcdb04
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-at91-master.c
> @@ -0,0 +1,804 @@
> +/*
> + * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
> + *
> + * Copyright (C) 2011 Weinmann Medical GmbH
> + * Author: Nikolaus Voss <n.voss@...nmann.de>
> + *
> + * Evolved from original work by:
> + * Copyright (C) 2004 Rick Bronson
> + * Converted to 2.6 by Andrew Victor <andrew@...people.com>
> + *
> + * Borrowed heavily from original work by:
> + * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_device.h>
> +#include <linux/platform_device.h>
> +#include <linux/platform_data/dma-atmel.h>
> +#include <linux/pm_runtime.h>
> +
> +#include "i2c-at91.h"
> +
> +void at91_init_twi_bus_master(struct at91_twi_dev *dev)
> +{
> + /* FIFO should be enabled immediately after the software reset */
> + if (dev->fifo_size)
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
> + at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
> +}
> +
> +/*
> + * Calculate symmetric clock as stated in datasheet:
> + * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
> + */
> +static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
> +{
> + int ckdiv, cdiv, div, hold = 0;
> + struct at91_twi_pdata *pdata = dev->pdata;
> + int offset = pdata->clk_offset;
> + int max_ckdiv = pdata->clk_max_div;
> + u32 twd_hold_time_ns = 0;
> +
> + div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
> + 2 * twi_clk) - offset);
> + ckdiv = fls(div >> 8);
> + cdiv = div >> ckdiv;
> +
> + if (ckdiv > max_ckdiv) {
> + dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
> + ckdiv, max_ckdiv);
> + ckdiv = max_ckdiv;
> + cdiv = 255;
> + }
> +
> + if (pdata->has_hold_field) {
> + of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
> + &twd_hold_time_ns);
> +
> + /*
> + * hold time = HOLD + 3 x T_peripheral_clock
> + * Use clk rate in kHz to prevent overflows when computing
> + * hold.
> + */
> + hold = DIV_ROUND_UP(twd_hold_time_ns
> + * (clk_get_rate(dev->clk) / 1000), 1000000);
> + hold -= 3;
> + if (hold < 0)
> + hold = 0;
> + if (hold > AT91_TWI_CWGR_HOLD_MAX) {
> + dev_warn(dev->dev,
> + "HOLD field set to its maximum value (%d instead of %d)\n",
> + AT91_TWI_CWGR_HOLD_MAX, hold);
> + hold = AT91_TWI_CWGR_HOLD_MAX;
> + }
> + }
> +
> + dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv
> + | AT91_TWI_CWGR_HOLD(hold);
> +
> + dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
> + cdiv, ckdiv, hold, twd_hold_time_ns);
> +}
> +
> +static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
> +{
> + struct at91_twi_dma *dma = &dev->dma;
> +
> + at91_twi_irq_save(dev);
> +
> + if (dma->xfer_in_progress) {
> + if (dma->direction == DMA_FROM_DEVICE)
> + dmaengine_terminate_all(dma->chan_rx);
> + else
> + dmaengine_terminate_all(dma->chan_tx);
> + dma->xfer_in_progress = false;
> + }
> + if (dma->buf_mapped) {
> + dma_unmap_single(dev->dev, sg_dma_address(&dma->sg[0]),
> + dev->buf_len, dma->direction);
> + dma->buf_mapped = false;
> + }
> +
> + at91_twi_irq_restore(dev);
> +}
> +
> +static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
> +{
> + if (!dev->buf_len)
> + return;
> +
> + /* 8bit write works with and without FIFO */
> + writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
> +
> + /* send stop when last byte has been written */
> + if (--dev->buf_len == 0)
> + if (!dev->use_alt_cmd)
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> +
> + dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
> +
> + ++dev->buf;
> +}
> +
> +static void at91_twi_write_data_dma_callback(void *data)
> +{
> + struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
> +
> + dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
> + dev->buf_len, DMA_TO_DEVICE);
> +
> + /*
> + * When this callback is called, THR/TX FIFO is likely not to be empty
> + * yet. So we have to wait for TXCOMP or NACK bits to be set into the
> + * Status Register to be sure that the STOP bit has been sent and the
> + * transfer is completed. The NACK interrupt has already been enabled,
> + * we just have to enable TXCOMP one.
> + */
> + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
> + if (!dev->use_alt_cmd)
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> +}
> +
> +static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
> +{
> + dma_addr_t dma_addr;
> + struct dma_async_tx_descriptor *txdesc;
> + struct at91_twi_dma *dma = &dev->dma;
> + struct dma_chan *chan_tx = dma->chan_tx;
> + unsigned int sg_len = 1;
> +
> + if (!dev->buf_len)
> + return;
> +
> + dma->direction = DMA_TO_DEVICE;
> +
> + at91_twi_irq_save(dev);
> + dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
> + DMA_TO_DEVICE);
> + if (dma_mapping_error(dev->dev, dma_addr)) {
> + dev_err(dev->dev, "dma map failed\n");
> + return;
> + }
> + dma->buf_mapped = true;
> + at91_twi_irq_restore(dev);
> +
> + if (dev->fifo_size) {
> + size_t part1_len, part2_len;
> + struct scatterlist *sg;
> + unsigned fifo_mr;
> +
> + sg_len = 0;
> +
> + part1_len = dev->buf_len & ~0x3;
> + if (part1_len) {
> + sg = &dma->sg[sg_len++];
> + sg_dma_len(sg) = part1_len;
> + sg_dma_address(sg) = dma_addr;
> + }
> +
> + part2_len = dev->buf_len & 0x3;
> + if (part2_len) {
> + sg = &dma->sg[sg_len++];
> + sg_dma_len(sg) = part2_len;
> + sg_dma_address(sg) = dma_addr + part1_len;
> + }
> +
> + /*
> + * DMA controller is triggered when at least 4 data can be
> + * written into the TX FIFO
> + */
> + fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> + fifo_mr &= ~AT91_TWI_FMR_TXRDYM_MASK;
> + fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_FOUR_DATA);
> + at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> + } else {
> + sg_dma_len(&dma->sg[0]) = dev->buf_len;
> + sg_dma_address(&dma->sg[0]) = dma_addr;
> + }
> +
> + txdesc = dmaengine_prep_slave_sg(chan_tx, dma->sg, sg_len,
> + DMA_MEM_TO_DEV,
> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> + if (!txdesc) {
> + dev_err(dev->dev, "dma prep slave sg failed\n");
> + goto error;
> + }
> +
> + txdesc->callback = at91_twi_write_data_dma_callback;
> + txdesc->callback_param = dev;
> +
> + dma->xfer_in_progress = true;
> + dmaengine_submit(txdesc);
> + dma_async_issue_pending(chan_tx);
> +
> + return;
> +
> +error:
> + at91_twi_dma_cleanup(dev);
> +}
> +
> +static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
> +{
> + /*
> + * If we are in this case, it means there is garbage data in RHR, so
> + * delete them.
> + */
> + if (!dev->buf_len) {
> + at91_twi_read(dev, AT91_TWI_RHR);
> + return;
> + }
> +
> + /* 8bit read works with and without FIFO */
> + *dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
> + --dev->buf_len;
> +
> + /* return if aborting, we only needed to read RHR to clear RXRDY*/
> + if (dev->recv_len_abort)
> + return;
> +
> + /* handle I2C_SMBUS_BLOCK_DATA */
> + if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
> + /* ensure length byte is a valid value */
> + if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
> + dev->msg->flags &= ~I2C_M_RECV_LEN;
> + dev->buf_len += *dev->buf;
> + dev->msg->len = dev->buf_len + 1;
> + dev_dbg(dev->dev, "received block length %zu\n",
> + dev->buf_len);
> + } else {
> + /* abort and send the stop by reading one more byte */
> + dev->recv_len_abort = true;
> + dev->buf_len = 1;
> + }
> + }
> +
> + /* send stop if second but last byte has been read */
> + if (!dev->use_alt_cmd && dev->buf_len == 1)
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> +
> + dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
> +
> + ++dev->buf;
> +}
> +
> +static void at91_twi_read_data_dma_callback(void *data)
> +{
> + struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
> + unsigned ier = AT91_TWI_TXCOMP;
> +
> + dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
> + dev->buf_len, DMA_FROM_DEVICE);
> +
> + if (!dev->use_alt_cmd) {
> + /* The last two bytes have to be read without using dma */
> + dev->buf += dev->buf_len - 2;
> + dev->buf_len = 2;
> + ier |= AT91_TWI_RXRDY;
> + }
> + at91_twi_write(dev, AT91_TWI_IER, ier);
> +}
> +
> +static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
> +{
> + dma_addr_t dma_addr;
> + struct dma_async_tx_descriptor *rxdesc;
> + struct at91_twi_dma *dma = &dev->dma;
> + struct dma_chan *chan_rx = dma->chan_rx;
> + size_t buf_len;
> +
> + buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
> + dma->direction = DMA_FROM_DEVICE;
> +
> + /* Keep in mind that we won't use dma to read the last two bytes */
> + at91_twi_irq_save(dev);
> + dma_addr = dma_map_single(dev->dev, dev->buf, buf_len, DMA_FROM_DEVICE);
> + if (dma_mapping_error(dev->dev, dma_addr)) {
> + dev_err(dev->dev, "dma map failed\n");
> + return;
> + }
> + dma->buf_mapped = true;
> + at91_twi_irq_restore(dev);
> +
> + if (dev->fifo_size && IS_ALIGNED(buf_len, 4)) {
> + unsigned fifo_mr;
> +
> + /*
> + * DMA controller is triggered when at least 4 data can be
> + * read from the RX FIFO
> + */
> + fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> + fifo_mr &= ~AT91_TWI_FMR_RXRDYM_MASK;
> + fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_FOUR_DATA);
> + at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> + }
> +
> + sg_dma_len(&dma->sg[0]) = buf_len;
> + sg_dma_address(&dma->sg[0]) = dma_addr;
> +
> + rxdesc = dmaengine_prep_slave_sg(chan_rx, dma->sg, 1, DMA_DEV_TO_MEM,
> + DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> + if (!rxdesc) {
> + dev_err(dev->dev, "dma prep slave sg failed\n");
> + goto error;
> + }
> +
> + rxdesc->callback = at91_twi_read_data_dma_callback;
> + rxdesc->callback_param = dev;
> +
> + dma->xfer_in_progress = true;
> + dmaengine_submit(rxdesc);
> + dma_async_issue_pending(dma->chan_rx);
> +
> + return;
> +
> +error:
> + at91_twi_dma_cleanup(dev);
> +}
> +
> +static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
> +{
> + struct at91_twi_dev *dev = dev_id;
> + const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
> + const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
> +
> + if (!irqstatus)
> + return IRQ_NONE;
> + /*
> + * In reception, the behavior of the twi device (before sama5d2) is
> + * weird. There is some magic about RXRDY flag! When a data has been
> + * almost received, the reception of a new one is anticipated if there
> + * is no stop command to send. That is the reason why ask for sending
> + * the stop command not on the last data but on the second last one.
> + *
> + * Unfortunately, we could still have the RXRDY flag set even if the
> + * transfer is done and we have read the last data. It might happen
> + * when the i2c slave device sends too quickly data after receiving the
> + * ack from the master. The data has been almost received before having
> + * the order to send stop. In this case, sending the stop command could
> + * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
> + * the RXRDY interrupt first in order to not keep garbage data in the
> + * Receive Holding Register for the next transfer.
> + */
> + if (irqstatus & AT91_TWI_RXRDY)
> + at91_twi_read_next_byte(dev);
> +
> + /*
> + * When a NACK condition is detected, the I2C controller sets the NACK,
> + * TXCOMP and TXRDY bits all together in the Status Register (SR).
> + *
> + * 1 - Handling NACK errors with CPU write transfer.
> + *
> + * In such case, we should not write the next byte into the Transmit
> + * Holding Register (THR) otherwise the I2C controller would start a new
> + * transfer and the I2C slave is likely to reply by another NACK.
> + *
> + * 2 - Handling NACK errors with DMA write transfer.
> + *
> + * By setting the TXRDY bit in the SR, the I2C controller also triggers
> + * the DMA controller to write the next data into the THR. Then the
> + * result depends on the hardware version of the I2C controller.
> + *
> + * 2a - Without support of the Alternative Command mode.
> + *
> + * This is the worst case: the DMA controller is triggered to write the
> + * next data into the THR, hence starting a new transfer: the I2C slave
> + * is likely to reply by another NACK.
> + * Concurrently, this interrupt handler is likely to be called to manage
> + * the first NACK before the I2C controller detects the second NACK and
> + * sets once again the NACK bit into the SR.
> + * When handling the first NACK, this interrupt handler disables the I2C
> + * controller interruptions, especially the NACK interrupt.
> + * Hence, the NACK bit is pending into the SR. This is why we should
> + * read the SR to clear all pending interrupts at the beginning of
> + * at91_do_twi_transfer() before actually starting a new transfer.
> + *
> + * 2b - With support of the Alternative Command mode.
> + *
> + * When a NACK condition is detected, the I2C controller also locks the
> + * THR (and sets the LOCK bit in the SR): even though the DMA controller
> + * is triggered by the TXRDY bit to write the next data into the THR,
> + * this data actually won't go on the I2C bus hence a second NACK is not
> + * generated.
> + */
> + if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
> + at91_disable_twi_interrupts(dev);
> + complete(&dev->cmd_complete);
> + } else if (irqstatus & AT91_TWI_TXRDY) {
> + at91_twi_write_next_byte(dev);
> + }
> +
> + /* catch error flags */
> + dev->transfer_status |= status;
> +
> + return IRQ_HANDLED;
> +}
> +
> +static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> +{
> + int ret;
> + unsigned long time_left;
> + bool has_unre_flag = dev->pdata->has_unre_flag;
> + bool has_alt_cmd = dev->pdata->has_alt_cmd;
> +
> + /*
> + * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
> + * read flag but shows the state of the transmission at the time the
> + * Status Register is read. According to the programmer datasheet,
> + * TXCOMP is set when both holding register and internal shifter are
> + * empty and STOP condition has been sent.
> + * Consequently, we should enable NACK interrupt rather than TXCOMP to
> + * detect transmission failure.
> + * Indeed let's take the case of an i2c write command using DMA.
> + * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and
> + * TXCOMP bits are set together into the Status Register.
> + * LOCK is a clear on write bit, which is set to prevent the DMA
> + * controller from sending new data on the i2c bus after a NACK
> + * condition has happened. Once locked, this i2c peripheral stops
> + * triggering the DMA controller for new data but it is more than
> + * likely that a new DMA transaction is already in progress, writing
> + * into the Transmit Holding Register. Since the peripheral is locked,
> + * these new data won't be sent to the i2c bus but they will remain
> + * into the Transmit Holding Register, so TXCOMP bit is cleared.
> + * Then when the interrupt handler is called, the Status Register is
> + * read: the TXCOMP bit is clear but NACK bit is still set. The driver
> + * manage the error properly, without waiting for timeout.
> + * This case can be reproduced easyly when writing into an at24 eeprom.
> + *
> + * Besides, the TXCOMP bit is already set before the i2c transaction
> + * has been started. For read transactions, this bit is cleared when
> + * writing the START bit into the Control Register. So the
> + * corresponding interrupt can safely be enabled just after.
> + * However for write transactions managed by the CPU, we first write
> + * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
> + * interrupt. If TXCOMP interrupt were enabled before writing into THR,
> + * the interrupt handler would be called immediately and the i2c command
> + * would be reported as completed.
> + * Also when a write transaction is managed by the DMA controller,
> + * enabling the TXCOMP interrupt in this function may lead to a race
> + * condition since we don't know whether the TXCOMP interrupt is enabled
> + * before or after the DMA has started to write into THR. So the TXCOMP
> + * interrupt is enabled later by at91_twi_write_data_dma_callback().
> + * Immediately after in that DMA callback, if the alternative command
> + * mode is not used, we still need to send the STOP condition manually
> + * writing the corresponding bit into the Control Register.
> + */
> +
> + dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
> + (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
> +
> + reinit_completion(&dev->cmd_complete);
> + dev->transfer_status = 0;
> +
> + /* Clear pending interrupts, such as NACK. */
> + at91_twi_read(dev, AT91_TWI_SR);
> +
> + if (dev->fifo_size) {
> + unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> +
> + /* Reset FIFO mode register */
> + fifo_mr &= ~(AT91_TWI_FMR_TXRDYM_MASK |
> + AT91_TWI_FMR_RXRDYM_MASK);
> + fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_ONE_DATA);
> + fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_ONE_DATA);
> + at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> +
> + /* Flush FIFOs */
> + at91_twi_write(dev, AT91_TWI_CR,
> + AT91_TWI_THRCLR | AT91_TWI_RHRCLR);
> + }
> +
> + if (!dev->buf_len) {
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
> + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
> + } else if (dev->msg->flags & I2C_M_RD) {
> + unsigned start_flags = AT91_TWI_START;
> +
> + /* if only one byte is to be read, immediately stop transfer */
> + if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
> + !(dev->msg->flags & I2C_M_RECV_LEN))
> + start_flags |= AT91_TWI_STOP;
> + at91_twi_write(dev, AT91_TWI_CR, start_flags);
> + /*
> + * When using dma without alternative command mode, the last
> + * byte has to be read manually in order to not send the stop
> + * command too late and then to receive extra data.
> + * In practice, there are some issues if you use the dma to
> + * read n-1 bytes because of latency.
> + * Reading n-2 bytes with dma and the two last ones manually
> + * seems to be the best solution.
> + */
> + if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
> + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
> + at91_twi_read_data_dma(dev);
> + } else {
> + at91_twi_write(dev, AT91_TWI_IER,
> + AT91_TWI_TXCOMP |
> + AT91_TWI_NACK |
> + AT91_TWI_RXRDY);
> + }
> + } else {
> + if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
> + at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
> + at91_twi_write_data_dma(dev);
> + } else {
> + at91_twi_write_next_byte(dev);
> + at91_twi_write(dev, AT91_TWI_IER,
> + AT91_TWI_TXCOMP |
> + AT91_TWI_NACK |
> + AT91_TWI_TXRDY);
> + }
> + }
> +
> + time_left = wait_for_completion_timeout(&dev->cmd_complete,
> + dev->adapter.timeout);
> + if (time_left == 0) {
> + dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
> + dev_err(dev->dev, "controller timed out\n");
> + at91_init_twi_bus(dev);
> + ret = -ETIMEDOUT;
> + goto error;
> + }
> + if (dev->transfer_status & AT91_TWI_NACK) {
> + dev_dbg(dev->dev, "received nack\n");
> + ret = -EREMOTEIO;
> + goto error;
> + }
> + if (dev->transfer_status & AT91_TWI_OVRE) {
> + dev_err(dev->dev, "overrun while reading\n");
> + ret = -EIO;
> + goto error;
> + }
> + if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
> + dev_err(dev->dev, "underrun while writing\n");
> + ret = -EIO;
> + goto error;
> + }
> + if ((has_alt_cmd || dev->fifo_size) &&
> + (dev->transfer_status & AT91_TWI_LOCK)) {
> + dev_err(dev->dev, "tx locked\n");
> + ret = -EIO;
> + goto error;
> + }
> + if (dev->recv_len_abort) {
> + dev_err(dev->dev, "invalid smbus block length recvd\n");
> + ret = -EPROTO;
> + goto error;
> + }
> +
> + dev_dbg(dev->dev, "transfer complete\n");
> +
> + return 0;
> +
> +error:
> + /* first stop DMA transfer if still in progress */
> + at91_twi_dma_cleanup(dev);
> + /* then flush THR/FIFO and unlock TX if locked */
> + if ((has_alt_cmd || dev->fifo_size) &&
> + (dev->transfer_status & AT91_TWI_LOCK)) {
> + dev_dbg(dev->dev, "unlock tx\n");
> + at91_twi_write(dev, AT91_TWI_CR,
> + AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
> + }
> + return ret;
> +}
> +
> +static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
> +{
> + struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> + int ret;
> + unsigned int_addr_flag = 0;
> + struct i2c_msg *m_start = msg;
> + bool is_read;
> +
> + dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
> +
> + ret = pm_runtime_get_sync(dev->dev);
> + if (ret < 0)
> + goto out;
> +
> + if (num == 2) {
> + int internal_address = 0;
> + int i;
> +
> + /* 1st msg is put into the internal address, start with 2nd */
> + m_start = &msg[1];
> + for (i = 0; i < msg->len; ++i) {
> + const unsigned addr = msg->buf[msg->len - 1 - i];
> +
> + internal_address |= addr << (8 * i);
> + int_addr_flag += AT91_TWI_IADRSZ_1;
> + }
> + at91_twi_write(dev, AT91_TWI_IADR, internal_address);
> + }
> +
> + dev->use_alt_cmd = false;
> + is_read = (m_start->flags & I2C_M_RD);
> + if (dev->pdata->has_alt_cmd) {
> + if (m_start->len > 0 &&
> + m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
> + at91_twi_write(dev, AT91_TWI_ACR,
> + AT91_TWI_ACR_DATAL(m_start->len) |
> + ((is_read) ? AT91_TWI_ACR_DIR : 0));
> + dev->use_alt_cmd = true;
> + } else {
> + at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
> + }
> + }
> +
> + at91_twi_write(dev, AT91_TWI_MMR,
> + (m_start->addr << 16) |
> + int_addr_flag |
> + ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
> +
> + dev->buf_len = m_start->len;
> + dev->buf = m_start->buf;
> + dev->msg = m_start;
> + dev->recv_len_abort = false;
> +
> + ret = at91_do_twi_transfer(dev);
> +
> + ret = (ret < 0) ? ret : num;
> +out:
> + pm_runtime_mark_last_busy(dev->dev);
> + pm_runtime_put_autosuspend(dev->dev);
> +
> + return ret;
> +}
> +
> +/*
> + * The hardware can handle at most two messages concatenated by a
> + * repeated start via it's internal address feature.
> + */
> +static const struct i2c_adapter_quirks at91_twi_quirks = {
> + .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
> + .max_comb_1st_msg_len = 3,
> +};
> +
> +static u32 at91_twi_func(struct i2c_adapter *adapter)
> +{
> + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> + | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> +}
> +
> +static const struct i2c_algorithm at91_twi_algorithm = {
> + .master_xfer = at91_twi_xfer,
> + .functionality = at91_twi_func,
> +};
> +
> +static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
> +{
> + int ret = 0;
> + struct dma_slave_config slave_config;
> + struct at91_twi_dma *dma = &dev->dma;
> + enum dma_slave_buswidth addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> +
> + /*
> + * The actual width of the access will be chosen in
> + * dmaengine_prep_slave_sg():
> + * for each buffer in the scatter-gather list, if its size is aligned
> + * to addr_width then addr_width accesses will be performed to transfer
> + * the buffer. On the other hand, if the buffer size is not aligned to
> + * addr_width then the buffer is transferred using single byte accesses.
> + * Please refer to the Atmel eXtended DMA controller driver.
> + * When FIFOs are used, the TXRDYM threshold can always be set to
> + * trigger the XDMAC when at least 4 data can be written into the TX
> + * FIFO, even if single byte accesses are performed.
> + * However the RXRDYM threshold must be set to fit the access width,
> + * deduced from buffer length, so the XDMAC is triggered properly to
> + * read data from the RX FIFO.
> + */
> + if (dev->fifo_size)
> + addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> +
> + memset(&slave_config, 0, sizeof(slave_config));
> + slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
> + slave_config.src_addr_width = addr_width;
> + slave_config.src_maxburst = 1;
> + slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
> + slave_config.dst_addr_width = addr_width;
> + slave_config.dst_maxburst = 1;
> + slave_config.device_fc = false;
> +
> + dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
> + if (IS_ERR(dma->chan_tx)) {
> + ret = PTR_ERR(dma->chan_tx);
> + dma->chan_tx = NULL;
> + goto error;
> + }
> +
> + dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
> + if (IS_ERR(dma->chan_rx)) {
> + ret = PTR_ERR(dma->chan_rx);
> + dma->chan_rx = NULL;
> + goto error;
> + }
> +
> + slave_config.direction = DMA_MEM_TO_DEV;
> + if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
> + dev_err(dev->dev, "failed to configure tx channel\n");
> + ret = -EINVAL;
> + goto error;
> + }
> +
> + slave_config.direction = DMA_DEV_TO_MEM;
> + if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
> + dev_err(dev->dev, "failed to configure rx channel\n");
> + ret = -EINVAL;
> + goto error;
> + }
> +
> + sg_init_table(dma->sg, 2);
> + dma->buf_mapped = false;
> + dma->xfer_in_progress = false;
> + dev->use_dma = true;
> +
> + dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
> + dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
> +
> + return ret;
> +
> +error:
> + if (ret != -EPROBE_DEFER)
> + dev_info(dev->dev, "can't get DMA channel, continue without DMA support\n");
> + if (dma->chan_rx)
> + dma_release_channel(dma->chan_rx);
> + if (dma->chan_tx)
> + dma_release_channel(dma->chan_tx);
> + return ret;
> +}
> +
> +int at91_twi_probe_master(struct platform_device *pdev,
> + u32 phy_addr, struct at91_twi_dev *dev)
> +{
> + int rc;
> + u32 bus_clk_rate;
> +
> + init_completion(&dev->cmd_complete);
> +
> + rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
> + dev_name(dev->dev), dev);
> + if (rc) {
> + dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
> + return rc;
> + }
> +
> + if (dev->dev->of_node) {
> + rc = at91_twi_configure_dma(dev, phy_addr);
> + if (rc == -EPROBE_DEFER)
> + return rc;
> + }
> +
> + if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
> + &dev->fifo_size)) {
> + dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
> + }
> +
> + rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
> + &bus_clk_rate);
> + if (rc)
> + bus_clk_rate = DEFAULT_TWI_CLK_HZ;
> +
> + at91_calc_twi_clock(dev, bus_clk_rate);
> +
> + dev->adapter.algo = &at91_twi_algorithm;
> + dev->adapter.quirks = &at91_twi_quirks;
> +
> + return 0;
> +}
> diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
> deleted file mode 100644
> index 73b6582..0000000
> --- a/drivers/i2c/busses/i2c-at91.c
> +++ /dev/null
> @@ -1,1263 +0,0 @@
> -/*
> - * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
> - *
> - * Copyright (C) 2011 Weinmann Medical GmbH
> - * Author: Nikolaus Voss <n.voss@...nmann.de>
> - *
> - * Evolved from original work by:
> - * Copyright (C) 2004 Rick Bronson
> - * Converted to 2.6 by Andrew Victor <andrew@...people.com>
> - *
> - * Borrowed heavily from original work by:
> - * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License as published by
> - * the Free Software Foundation; either version 2 of the License, or
> - * (at your option) any later version.
> - */
> -
> -#include <linux/clk.h>
> -#include <linux/completion.h>
> -#include <linux/dma-mapping.h>
> -#include <linux/dmaengine.h>
> -#include <linux/err.h>
> -#include <linux/i2c.h>
> -#include <linux/interrupt.h>
> -#include <linux/io.h>
> -#include <linux/module.h>
> -#include <linux/of.h>
> -#include <linux/of_device.h>
> -#include <linux/platform_device.h>
> -#include <linux/slab.h>
> -#include <linux/platform_data/dma-atmel.h>
> -#include <linux/pm_runtime.h>
> -#include <linux/pinctrl/consumer.h>
> -
> -#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
> -#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
> -#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
> -#define AUTOSUSPEND_TIMEOUT 2000
> -#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256
> -
> -/* AT91 TWI register definitions */
> -#define AT91_TWI_CR 0x0000 /* Control Register */
> -#define AT91_TWI_START BIT(0) /* Send a Start Condition */
> -#define AT91_TWI_STOP BIT(1) /* Send a Stop Condition */
> -#define AT91_TWI_MSEN BIT(2) /* Master Transfer Enable */
> -#define AT91_TWI_MSDIS BIT(3) /* Master Transfer Disable */
> -#define AT91_TWI_SVEN BIT(4) /* Slave Transfer Enable */
> -#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
> -#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
> -#define AT91_TWI_SWRST BIT(7) /* Software Reset */
> -#define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode Enable */
> -#define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode Disable */
> -#define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register Clear */
> -#define AT91_TWI_RHRCLR BIT(25) /* Receive Holding Register Clear */
> -#define AT91_TWI_LOCKCLR BIT(26) /* Lock Clear */
> -#define AT91_TWI_FIFOEN BIT(28) /* FIFO Enable */
> -#define AT91_TWI_FIFODIS BIT(29) /* FIFO Disable */
> -
> -#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
> -#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
> -#define AT91_TWI_MREAD BIT(12) /* Master Read Direction */
> -
> -#define AT91_TWI_IADR 0x000c /* Internal Address Register */
> -
> -#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
> -#define AT91_TWI_CWGR_HOLD_MAX 0x1f
> -#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
> -
> -#define AT91_TWI_SR 0x0020 /* Status Register */
> -#define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */
> -#define AT91_TWI_RXRDY BIT(1) /* Receive Holding Register Ready */
> -#define AT91_TWI_TXRDY BIT(2) /* Transmit Holding Register Ready */
> -#define AT91_TWI_OVRE BIT(6) /* Overrun Error */
> -#define AT91_TWI_UNRE BIT(7) /* Underrun Error */
> -#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
> -#define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors */
> -
> -#define AT91_TWI_INT_MASK \
> - (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
> -
> -#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */
> -#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */
> -#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */
> -#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */
> -#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
> -
> -#define AT91_TWI_ACR 0x0040 /* Alternative Command Register */
> -#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
> -#define AT91_TWI_ACR_DIR BIT(8)
> -
> -#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
> -#define AT91_TWI_FMR_TXRDYM(mode) (((mode) & 0x3) << 0)
> -#define AT91_TWI_FMR_TXRDYM_MASK (0x3 << 0)
> -#define AT91_TWI_FMR_RXRDYM(mode) (((mode) & 0x3) << 4)
> -#define AT91_TWI_FMR_RXRDYM_MASK (0x3 << 4)
> -#define AT91_TWI_ONE_DATA 0x0
> -#define AT91_TWI_TWO_DATA 0x1
> -#define AT91_TWI_FOUR_DATA 0x2
> -
> -#define AT91_TWI_FLR 0x0054 /* FIFO Level Register */
> -
> -#define AT91_TWI_FSR 0x0060 /* FIFO Status Register */
> -#define AT91_TWI_FIER 0x0064 /* FIFO Interrupt Enable Register */
> -#define AT91_TWI_FIDR 0x0068 /* FIFO Interrupt Disable Register */
> -#define AT91_TWI_FIMR 0x006c /* FIFO Interrupt Mask Register */
> -
> -#define AT91_TWI_VER 0x00fc /* Version Register */
> -
> -struct at91_twi_pdata {
> - unsigned clk_max_div;
> - unsigned clk_offset;
> - bool has_unre_flag;
> - bool has_alt_cmd;
> - bool has_hold_field;
> - struct at_dma_slave dma_slave;
> -};
> -
> -struct at91_twi_dma {
> - struct dma_chan *chan_rx;
> - struct dma_chan *chan_tx;
> - struct scatterlist sg[2];
> - struct dma_async_tx_descriptor *data_desc;
> - enum dma_data_direction direction;
> - bool buf_mapped;
> - bool xfer_in_progress;
> -};
> -
> -struct at91_twi_dev {
> - struct device *dev;
> - void __iomem *base;
> - struct completion cmd_complete;
> - struct clk *clk;
> - u8 *buf;
> - size_t buf_len;
> - struct i2c_msg *msg;
> - int irq;
> - unsigned imr;
> - unsigned transfer_status;
> - struct i2c_adapter adapter;
> - unsigned twi_cwgr_reg;
> - struct at91_twi_pdata *pdata;
> - bool use_dma;
> - bool use_alt_cmd;
> - bool recv_len_abort;
> - u32 fifo_size;
> - struct at91_twi_dma dma;
> -};
> -
> -static unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg)
> -{
> - return readl_relaxed(dev->base + reg);
> -}
> -
> -static void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val)
> -{
> - writel_relaxed(val, dev->base + reg);
> -}
> -
> -static void at91_disable_twi_interrupts(struct at91_twi_dev *dev)
> -{
> - at91_twi_write(dev, AT91_TWI_IDR, AT91_TWI_INT_MASK);
> -}
> -
> -static void at91_twi_irq_save(struct at91_twi_dev *dev)
> -{
> - dev->imr = at91_twi_read(dev, AT91_TWI_IMR) & AT91_TWI_INT_MASK;
> - at91_disable_twi_interrupts(dev);
> -}
> -
> -static void at91_twi_irq_restore(struct at91_twi_dev *dev)
> -{
> - at91_twi_write(dev, AT91_TWI_IER, dev->imr);
> -}
> -
> -static void at91_init_twi_bus_master(struct at91_twi_dev *dev)
> -{
> - /* FIFO should be enabled immediately after the software reset */
> - if (dev->fifo_size)
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_FIFOEN);
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_MSEN);
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SVDIS);
> - at91_twi_write(dev, AT91_TWI_CWGR, dev->twi_cwgr_reg);
> -}
> -
> -static void at91_init_twi_bus(struct at91_twi_dev *dev)
> -{
> - at91_disable_twi_interrupts(dev);
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_SWRST);
> -
> - at91_init_twi_bus_master(dev);
> -}
> -
> -/*
> - * Calculate symmetric clock as stated in datasheet:
> - * twi_clk = F_MAIN / (2 * (cdiv * (1 << ckdiv) + offset))
> - */
> -static void at91_calc_twi_clock(struct at91_twi_dev *dev, int twi_clk)
> -{
> - int ckdiv, cdiv, div, hold = 0;
> - struct at91_twi_pdata *pdata = dev->pdata;
> - int offset = pdata->clk_offset;
> - int max_ckdiv = pdata->clk_max_div;
> - u32 twd_hold_time_ns = 0;
> -
> - div = max(0, (int)DIV_ROUND_UP(clk_get_rate(dev->clk),
> - 2 * twi_clk) - offset);
> - ckdiv = fls(div >> 8);
> - cdiv = div >> ckdiv;
> -
> - if (ckdiv > max_ckdiv) {
> - dev_warn(dev->dev, "%d exceeds ckdiv max value which is %d.\n",
> - ckdiv, max_ckdiv);
> - ckdiv = max_ckdiv;
> - cdiv = 255;
> - }
> -
> - if (pdata->has_hold_field) {
> - of_property_read_u32(dev->dev->of_node, "i2c-sda-hold-time-ns",
> - &twd_hold_time_ns);
> -
> - /*
> - * hold time = HOLD + 3 x T_peripheral_clock
> - * Use clk rate in kHz to prevent overflows when computing
> - * hold.
> - */
> - hold = DIV_ROUND_UP(twd_hold_time_ns
> - * (clk_get_rate(dev->clk) / 1000), 1000000);
> - hold -= 3;
> - if (hold < 0)
> - hold = 0;
> - if (hold > AT91_TWI_CWGR_HOLD_MAX) {
> - dev_warn(dev->dev,
> - "HOLD field set to its maximum value (%d instead of %d)\n",
> - AT91_TWI_CWGR_HOLD_MAX, hold);
> - hold = AT91_TWI_CWGR_HOLD_MAX;
> - }
> - }
> -
> - dev->twi_cwgr_reg = (ckdiv << 16) | (cdiv << 8) | cdiv
> - | AT91_TWI_CWGR_HOLD(hold);
> -
> - dev_dbg(dev->dev, "cdiv %d ckdiv %d hold %d (%d ns)\n",
> - cdiv, ckdiv, hold, twd_hold_time_ns);
> -}
> -
> -static void at91_twi_dma_cleanup(struct at91_twi_dev *dev)
> -{
> - struct at91_twi_dma *dma = &dev->dma;
> -
> - at91_twi_irq_save(dev);
> -
> - if (dma->xfer_in_progress) {
> - if (dma->direction == DMA_FROM_DEVICE)
> - dmaengine_terminate_all(dma->chan_rx);
> - else
> - dmaengine_terminate_all(dma->chan_tx);
> - dma->xfer_in_progress = false;
> - }
> - if (dma->buf_mapped) {
> - dma_unmap_single(dev->dev, sg_dma_address(&dma->sg[0]),
> - dev->buf_len, dma->direction);
> - dma->buf_mapped = false;
> - }
> -
> - at91_twi_irq_restore(dev);
> -}
> -
> -static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
> -{
> - if (!dev->buf_len)
> - return;
> -
> - /* 8bit write works with and without FIFO */
> - writeb_relaxed(*dev->buf, dev->base + AT91_TWI_THR);
> -
> - /* send stop when last byte has been written */
> - if (--dev->buf_len == 0)
> - if (!dev->use_alt_cmd)
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> -
> - dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
> -
> - ++dev->buf;
> -}
> -
> -static void at91_twi_write_data_dma_callback(void *data)
> -{
> - struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
> -
> - dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
> - dev->buf_len, DMA_TO_DEVICE);
> -
> - /*
> - * When this callback is called, THR/TX FIFO is likely not to be empty
> - * yet. So we have to wait for TXCOMP or NACK bits to be set into the
> - * Status Register to be sure that the STOP bit has been sent and the
> - * transfer is completed. The NACK interrupt has already been enabled,
> - * we just have to enable TXCOMP one.
> - */
> - at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
> - if (!dev->use_alt_cmd)
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> -}
> -
> -static void at91_twi_write_data_dma(struct at91_twi_dev *dev)
> -{
> - dma_addr_t dma_addr;
> - struct dma_async_tx_descriptor *txdesc;
> - struct at91_twi_dma *dma = &dev->dma;
> - struct dma_chan *chan_tx = dma->chan_tx;
> - unsigned int sg_len = 1;
> -
> - if (!dev->buf_len)
> - return;
> -
> - dma->direction = DMA_TO_DEVICE;
> -
> - at91_twi_irq_save(dev);
> - dma_addr = dma_map_single(dev->dev, dev->buf, dev->buf_len,
> - DMA_TO_DEVICE);
> - if (dma_mapping_error(dev->dev, dma_addr)) {
> - dev_err(dev->dev, "dma map failed\n");
> - return;
> - }
> - dma->buf_mapped = true;
> - at91_twi_irq_restore(dev);
> -
> - if (dev->fifo_size) {
> - size_t part1_len, part2_len;
> - struct scatterlist *sg;
> - unsigned fifo_mr;
> -
> - sg_len = 0;
> -
> - part1_len = dev->buf_len & ~0x3;
> - if (part1_len) {
> - sg = &dma->sg[sg_len++];
> - sg_dma_len(sg) = part1_len;
> - sg_dma_address(sg) = dma_addr;
> - }
> -
> - part2_len = dev->buf_len & 0x3;
> - if (part2_len) {
> - sg = &dma->sg[sg_len++];
> - sg_dma_len(sg) = part2_len;
> - sg_dma_address(sg) = dma_addr + part1_len;
> - }
> -
> - /*
> - * DMA controller is triggered when at least 4 data can be
> - * written into the TX FIFO
> - */
> - fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> - fifo_mr &= ~AT91_TWI_FMR_TXRDYM_MASK;
> - fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_FOUR_DATA);
> - at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> - } else {
> - sg_dma_len(&dma->sg[0]) = dev->buf_len;
> - sg_dma_address(&dma->sg[0]) = dma_addr;
> - }
> -
> - txdesc = dmaengine_prep_slave_sg(chan_tx, dma->sg, sg_len,
> - DMA_MEM_TO_DEV,
> - DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> - if (!txdesc) {
> - dev_err(dev->dev, "dma prep slave sg failed\n");
> - goto error;
> - }
> -
> - txdesc->callback = at91_twi_write_data_dma_callback;
> - txdesc->callback_param = dev;
> -
> - dma->xfer_in_progress = true;
> - dmaengine_submit(txdesc);
> - dma_async_issue_pending(chan_tx);
> -
> - return;
> -
> -error:
> - at91_twi_dma_cleanup(dev);
> -}
> -
> -static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
> -{
> - /*
> - * If we are in this case, it means there is garbage data in RHR, so
> - * delete them.
> - */
> - if (!dev->buf_len) {
> - at91_twi_read(dev, AT91_TWI_RHR);
> - return;
> - }
> -
> - /* 8bit read works with and without FIFO */
> - *dev->buf = readb_relaxed(dev->base + AT91_TWI_RHR);
> - --dev->buf_len;
> -
> - /* return if aborting, we only needed to read RHR to clear RXRDY*/
> - if (dev->recv_len_abort)
> - return;
> -
> - /* handle I2C_SMBUS_BLOCK_DATA */
> - if (unlikely(dev->msg->flags & I2C_M_RECV_LEN)) {
> - /* ensure length byte is a valid value */
> - if (*dev->buf <= I2C_SMBUS_BLOCK_MAX && *dev->buf > 0) {
> - dev->msg->flags &= ~I2C_M_RECV_LEN;
> - dev->buf_len += *dev->buf;
> - dev->msg->len = dev->buf_len + 1;
> - dev_dbg(dev->dev, "received block length %zu\n",
> - dev->buf_len);
> - } else {
> - /* abort and send the stop by reading one more byte */
> - dev->recv_len_abort = true;
> - dev->buf_len = 1;
> - }
> - }
> -
> - /* send stop if second but last byte has been read */
> - if (!dev->use_alt_cmd && dev->buf_len == 1)
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
> -
> - dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
> -
> - ++dev->buf;
> -}
> -
> -static void at91_twi_read_data_dma_callback(void *data)
> -{
> - struct at91_twi_dev *dev = (struct at91_twi_dev *)data;
> - unsigned ier = AT91_TWI_TXCOMP;
> -
> - dma_unmap_single(dev->dev, sg_dma_address(&dev->dma.sg[0]),
> - dev->buf_len, DMA_FROM_DEVICE);
> -
> - if (!dev->use_alt_cmd) {
> - /* The last two bytes have to be read without using dma */
> - dev->buf += dev->buf_len - 2;
> - dev->buf_len = 2;
> - ier |= AT91_TWI_RXRDY;
> - }
> - at91_twi_write(dev, AT91_TWI_IER, ier);
> -}
> -
> -static void at91_twi_read_data_dma(struct at91_twi_dev *dev)
> -{
> - dma_addr_t dma_addr;
> - struct dma_async_tx_descriptor *rxdesc;
> - struct at91_twi_dma *dma = &dev->dma;
> - struct dma_chan *chan_rx = dma->chan_rx;
> - size_t buf_len;
> -
> - buf_len = (dev->use_alt_cmd) ? dev->buf_len : dev->buf_len - 2;
> - dma->direction = DMA_FROM_DEVICE;
> -
> - /* Keep in mind that we won't use dma to read the last two bytes */
> - at91_twi_irq_save(dev);
> - dma_addr = dma_map_single(dev->dev, dev->buf, buf_len, DMA_FROM_DEVICE);
> - if (dma_mapping_error(dev->dev, dma_addr)) {
> - dev_err(dev->dev, "dma map failed\n");
> - return;
> - }
> - dma->buf_mapped = true;
> - at91_twi_irq_restore(dev);
> -
> - if (dev->fifo_size && IS_ALIGNED(buf_len, 4)) {
> - unsigned fifo_mr;
> -
> - /*
> - * DMA controller is triggered when at least 4 data can be
> - * read from the RX FIFO
> - */
> - fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> - fifo_mr &= ~AT91_TWI_FMR_RXRDYM_MASK;
> - fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_FOUR_DATA);
> - at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> - }
> -
> - sg_dma_len(&dma->sg[0]) = buf_len;
> - sg_dma_address(&dma->sg[0]) = dma_addr;
> -
> - rxdesc = dmaengine_prep_slave_sg(chan_rx, dma->sg, 1, DMA_DEV_TO_MEM,
> - DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
> - if (!rxdesc) {
> - dev_err(dev->dev, "dma prep slave sg failed\n");
> - goto error;
> - }
> -
> - rxdesc->callback = at91_twi_read_data_dma_callback;
> - rxdesc->callback_param = dev;
> -
> - dma->xfer_in_progress = true;
> - dmaengine_submit(rxdesc);
> - dma_async_issue_pending(dma->chan_rx);
> -
> - return;
> -
> -error:
> - at91_twi_dma_cleanup(dev);
> -}
> -
> -static irqreturn_t atmel_twi_interrupt(int irq, void *dev_id)
> -{
> - struct at91_twi_dev *dev = dev_id;
> - const unsigned status = at91_twi_read(dev, AT91_TWI_SR);
> - const unsigned irqstatus = status & at91_twi_read(dev, AT91_TWI_IMR);
> -
> - if (!irqstatus)
> - return IRQ_NONE;
> - /*
> - * In reception, the behavior of the twi device (before sama5d2) is
> - * weird. There is some magic about RXRDY flag! When a data has been
> - * almost received, the reception of a new one is anticipated if there
> - * is no stop command to send. That is the reason why ask for sending
> - * the stop command not on the last data but on the second last one.
> - *
> - * Unfortunately, we could still have the RXRDY flag set even if the
> - * transfer is done and we have read the last data. It might happen
> - * when the i2c slave device sends too quickly data after receiving the
> - * ack from the master. The data has been almost received before having
> - * the order to send stop. In this case, sending the stop command could
> - * cause a RXRDY interrupt with a TXCOMP one. It is better to manage
> - * the RXRDY interrupt first in order to not keep garbage data in the
> - * Receive Holding Register for the next transfer.
> - */
> - if (irqstatus & AT91_TWI_RXRDY)
> - at91_twi_read_next_byte(dev);
> -
> - /*
> - * When a NACK condition is detected, the I2C controller sets the NACK,
> - * TXCOMP and TXRDY bits all together in the Status Register (SR).
> - *
> - * 1 - Handling NACK errors with CPU write transfer.
> - *
> - * In such case, we should not write the next byte into the Transmit
> - * Holding Register (THR) otherwise the I2C controller would start a new
> - * transfer and the I2C slave is likely to reply by another NACK.
> - *
> - * 2 - Handling NACK errors with DMA write transfer.
> - *
> - * By setting the TXRDY bit in the SR, the I2C controller also triggers
> - * the DMA controller to write the next data into the THR. Then the
> - * result depends on the hardware version of the I2C controller.
> - *
> - * 2a - Without support of the Alternative Command mode.
> - *
> - * This is the worst case: the DMA controller is triggered to write the
> - * next data into the THR, hence starting a new transfer: the I2C slave
> - * is likely to reply by another NACK.
> - * Concurrently, this interrupt handler is likely to be called to manage
> - * the first NACK before the I2C controller detects the second NACK and
> - * sets once again the NACK bit into the SR.
> - * When handling the first NACK, this interrupt handler disables the I2C
> - * controller interruptions, especially the NACK interrupt.
> - * Hence, the NACK bit is pending into the SR. This is why we should
> - * read the SR to clear all pending interrupts at the beginning of
> - * at91_do_twi_transfer() before actually starting a new transfer.
> - *
> - * 2b - With support of the Alternative Command mode.
> - *
> - * When a NACK condition is detected, the I2C controller also locks the
> - * THR (and sets the LOCK bit in the SR): even though the DMA controller
> - * is triggered by the TXRDY bit to write the next data into the THR,
> - * this data actually won't go on the I2C bus hence a second NACK is not
> - * generated.
> - */
> - if (irqstatus & (AT91_TWI_TXCOMP | AT91_TWI_NACK)) {
> - at91_disable_twi_interrupts(dev);
> - complete(&dev->cmd_complete);
> - } else if (irqstatus & AT91_TWI_TXRDY) {
> - at91_twi_write_next_byte(dev);
> - }
> -
> - /* catch error flags */
> - dev->transfer_status |= status;
> -
> - return IRQ_HANDLED;
> -}
> -
> -static int at91_do_twi_transfer(struct at91_twi_dev *dev)
> -{
> - int ret;
> - unsigned long time_left;
> - bool has_unre_flag = dev->pdata->has_unre_flag;
> - bool has_alt_cmd = dev->pdata->has_alt_cmd;
> -
> - /*
> - * WARNING: the TXCOMP bit in the Status Register is NOT a clear on
> - * read flag but shows the state of the transmission at the time the
> - * Status Register is read. According to the programmer datasheet,
> - * TXCOMP is set when both holding register and internal shifter are
> - * empty and STOP condition has been sent.
> - * Consequently, we should enable NACK interrupt rather than TXCOMP to
> - * detect transmission failure.
> - * Indeed let's take the case of an i2c write command using DMA.
> - * Whenever the slave doesn't acknowledge a byte, the LOCK, NACK and
> - * TXCOMP bits are set together into the Status Register.
> - * LOCK is a clear on write bit, which is set to prevent the DMA
> - * controller from sending new data on the i2c bus after a NACK
> - * condition has happened. Once locked, this i2c peripheral stops
> - * triggering the DMA controller for new data but it is more than
> - * likely that a new DMA transaction is already in progress, writing
> - * into the Transmit Holding Register. Since the peripheral is locked,
> - * these new data won't be sent to the i2c bus but they will remain
> - * into the Transmit Holding Register, so TXCOMP bit is cleared.
> - * Then when the interrupt handler is called, the Status Register is
> - * read: the TXCOMP bit is clear but NACK bit is still set. The driver
> - * manage the error properly, without waiting for timeout.
> - * This case can be reproduced easyly when writing into an at24 eeprom.
> - *
> - * Besides, the TXCOMP bit is already set before the i2c transaction
> - * has been started. For read transactions, this bit is cleared when
> - * writing the START bit into the Control Register. So the
> - * corresponding interrupt can safely be enabled just after.
> - * However for write transactions managed by the CPU, we first write
> - * into THR, so TXCOMP is cleared. Then we can safely enable TXCOMP
> - * interrupt. If TXCOMP interrupt were enabled before writing into THR,
> - * the interrupt handler would be called immediately and the i2c command
> - * would be reported as completed.
> - * Also when a write transaction is managed by the DMA controller,
> - * enabling the TXCOMP interrupt in this function may lead to a race
> - * condition since we don't know whether the TXCOMP interrupt is enabled
> - * before or after the DMA has started to write into THR. So the TXCOMP
> - * interrupt is enabled later by at91_twi_write_data_dma_callback().
> - * Immediately after in that DMA callback, if the alternative command
> - * mode is not used, we still need to send the STOP condition manually
> - * writing the corresponding bit into the Control Register.
> - */
> -
> - dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
> - (dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
> -
> - reinit_completion(&dev->cmd_complete);
> - dev->transfer_status = 0;
> -
> - /* Clear pending interrupts, such as NACK. */
> - at91_twi_read(dev, AT91_TWI_SR);
> -
> - if (dev->fifo_size) {
> - unsigned fifo_mr = at91_twi_read(dev, AT91_TWI_FMR);
> -
> - /* Reset FIFO mode register */
> - fifo_mr &= ~(AT91_TWI_FMR_TXRDYM_MASK |
> - AT91_TWI_FMR_RXRDYM_MASK);
> - fifo_mr |= AT91_TWI_FMR_TXRDYM(AT91_TWI_ONE_DATA);
> - fifo_mr |= AT91_TWI_FMR_RXRDYM(AT91_TWI_ONE_DATA);
> - at91_twi_write(dev, AT91_TWI_FMR, fifo_mr);
> -
> - /* Flush FIFOs */
> - at91_twi_write(dev, AT91_TWI_CR,
> - AT91_TWI_THRCLR | AT91_TWI_RHRCLR);
> - }
> -
> - if (!dev->buf_len) {
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_QUICK);
> - at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_TXCOMP);
> - } else if (dev->msg->flags & I2C_M_RD) {
> - unsigned start_flags = AT91_TWI_START;
> -
> - /* if only one byte is to be read, immediately stop transfer */
> - if (!dev->use_alt_cmd && dev->buf_len <= 1 &&
> - !(dev->msg->flags & I2C_M_RECV_LEN))
> - start_flags |= AT91_TWI_STOP;
> - at91_twi_write(dev, AT91_TWI_CR, start_flags);
> - /*
> - * When using dma without alternative command mode, the last
> - * byte has to be read manually in order to not send the stop
> - * command too late and then to receive extra data.
> - * In practice, there are some issues if you use the dma to
> - * read n-1 bytes because of latency.
> - * Reading n-2 bytes with dma and the two last ones manually
> - * seems to be the best solution.
> - */
> - if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
> - at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
> - at91_twi_read_data_dma(dev);
> - } else {
> - at91_twi_write(dev, AT91_TWI_IER,
> - AT91_TWI_TXCOMP |
> - AT91_TWI_NACK |
> - AT91_TWI_RXRDY);
> - }
> - } else {
> - if (dev->use_dma && (dev->buf_len > AT91_I2C_DMA_THRESHOLD)) {
> - at91_twi_write(dev, AT91_TWI_IER, AT91_TWI_NACK);
> - at91_twi_write_data_dma(dev);
> - } else {
> - at91_twi_write_next_byte(dev);
> - at91_twi_write(dev, AT91_TWI_IER,
> - AT91_TWI_TXCOMP |
> - AT91_TWI_NACK |
> - AT91_TWI_TXRDY);
> - }
> - }
> -
> - time_left = wait_for_completion_timeout(&dev->cmd_complete,
> - dev->adapter.timeout);
> - if (time_left == 0) {
> - dev->transfer_status |= at91_twi_read(dev, AT91_TWI_SR);
> - dev_err(dev->dev, "controller timed out\n");
> - at91_init_twi_bus(dev);
> - ret = -ETIMEDOUT;
> - goto error;
> - }
> - if (dev->transfer_status & AT91_TWI_NACK) {
> - dev_dbg(dev->dev, "received nack\n");
> - ret = -EREMOTEIO;
> - goto error;
> - }
> - if (dev->transfer_status & AT91_TWI_OVRE) {
> - dev_err(dev->dev, "overrun while reading\n");
> - ret = -EIO;
> - goto error;
> - }
> - if (has_unre_flag && dev->transfer_status & AT91_TWI_UNRE) {
> - dev_err(dev->dev, "underrun while writing\n");
> - ret = -EIO;
> - goto error;
> - }
> - if ((has_alt_cmd || dev->fifo_size) &&
> - (dev->transfer_status & AT91_TWI_LOCK)) {
> - dev_err(dev->dev, "tx locked\n");
> - ret = -EIO;
> - goto error;
> - }
> - if (dev->recv_len_abort) {
> - dev_err(dev->dev, "invalid smbus block length recvd\n");
> - ret = -EPROTO;
> - goto error;
> - }
> -
> - dev_dbg(dev->dev, "transfer complete\n");
> -
> - return 0;
> -
> -error:
> - /* first stop DMA transfer if still in progress */
> - at91_twi_dma_cleanup(dev);
> - /* then flush THR/FIFO and unlock TX if locked */
> - if ((has_alt_cmd || dev->fifo_size) &&
> - (dev->transfer_status & AT91_TWI_LOCK)) {
> - dev_dbg(dev->dev, "unlock tx\n");
> - at91_twi_write(dev, AT91_TWI_CR,
> - AT91_TWI_THRCLR | AT91_TWI_LOCKCLR);
> - }
> - return ret;
> -}
> -
> -static int at91_twi_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, int num)
> -{
> - struct at91_twi_dev *dev = i2c_get_adapdata(adap);
> - int ret;
> - unsigned int_addr_flag = 0;
> - struct i2c_msg *m_start = msg;
> - bool is_read;
> -
> - dev_dbg(&adap->dev, "at91_xfer: processing %d messages:\n", num);
> -
> - ret = pm_runtime_get_sync(dev->dev);
> - if (ret < 0)
> - goto out;
> -
> - if (num == 2) {
> - int internal_address = 0;
> - int i;
> -
> - /* 1st msg is put into the internal address, start with 2nd */
> - m_start = &msg[1];
> - for (i = 0; i < msg->len; ++i) {
> - const unsigned addr = msg->buf[msg->len - 1 - i];
> -
> - internal_address |= addr << (8 * i);
> - int_addr_flag += AT91_TWI_IADRSZ_1;
> - }
> - at91_twi_write(dev, AT91_TWI_IADR, internal_address);
> - }
> -
> - dev->use_alt_cmd = false;
> - is_read = (m_start->flags & I2C_M_RD);
> - if (dev->pdata->has_alt_cmd) {
> - if (m_start->len > 0 &&
> - m_start->len < AT91_I2C_MAX_ALT_CMD_DATA_SIZE) {
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMEN);
> - at91_twi_write(dev, AT91_TWI_ACR,
> - AT91_TWI_ACR_DATAL(m_start->len) |
> - ((is_read) ? AT91_TWI_ACR_DIR : 0));
> - dev->use_alt_cmd = true;
> - } else {
> - at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_ACMDIS);
> - }
> - }
> -
> - at91_twi_write(dev, AT91_TWI_MMR,
> - (m_start->addr << 16) |
> - int_addr_flag |
> - ((!dev->use_alt_cmd && is_read) ? AT91_TWI_MREAD : 0));
> -
> - dev->buf_len = m_start->len;
> - dev->buf = m_start->buf;
> - dev->msg = m_start;
> - dev->recv_len_abort = false;
> -
> - ret = at91_do_twi_transfer(dev);
> -
> - ret = (ret < 0) ? ret : num;
> -out:
> - pm_runtime_mark_last_busy(dev->dev);
> - pm_runtime_put_autosuspend(dev->dev);
> -
> - return ret;
> -}
> -
> -/*
> - * The hardware can handle at most two messages concatenated by a
> - * repeated start via it's internal address feature.
> - */
> -static const struct i2c_adapter_quirks at91_twi_quirks = {
> - .flags = I2C_AQ_COMB | I2C_AQ_COMB_WRITE_FIRST | I2C_AQ_COMB_SAME_ADDR,
> - .max_comb_1st_msg_len = 3,
> -};
> -
> -static u32 at91_twi_func(struct i2c_adapter *adapter)
> -{
> - return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL
> - | I2C_FUNC_SMBUS_READ_BLOCK_DATA;
> -}
> -
> -static const struct i2c_algorithm at91_twi_algorithm = {
> - .master_xfer = at91_twi_xfer,
> - .functionality = at91_twi_func,
> -};
> -
> -static struct at91_twi_pdata at91rm9200_config = {
> - .clk_max_div = 5,
> - .clk_offset = 3,
> - .has_unre_flag = true,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static struct at91_twi_pdata at91sam9261_config = {
> - .clk_max_div = 5,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static struct at91_twi_pdata at91sam9260_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static struct at91_twi_pdata at91sam9g20_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static struct at91_twi_pdata at91sam9g10_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static const struct platform_device_id at91_twi_devtypes[] = {
> - {
> - .name = "i2c-at91rm9200",
> - .driver_data = (unsigned long) &at91rm9200_config,
> - }, {
> - .name = "i2c-at91sam9261",
> - .driver_data = (unsigned long) &at91sam9261_config,
> - }, {
> - .name = "i2c-at91sam9260",
> - .driver_data = (unsigned long) &at91sam9260_config,
> - }, {
> - .name = "i2c-at91sam9g20",
> - .driver_data = (unsigned long) &at91sam9g20_config,
> - }, {
> - .name = "i2c-at91sam9g10",
> - .driver_data = (unsigned long) &at91sam9g10_config,
> - }, {
> - /* sentinel */
> - }
> -};
> -
> -#if defined(CONFIG_OF)
> -static struct at91_twi_pdata at91sam9x5_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = false,
> -};
> -
> -static struct at91_twi_pdata sama5d4_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = false,
> - .has_alt_cmd = false,
> - .has_hold_field = true,
> -};
> -
> -static struct at91_twi_pdata sama5d2_config = {
> - .clk_max_div = 7,
> - .clk_offset = 4,
> - .has_unre_flag = true,
> - .has_alt_cmd = true,
> - .has_hold_field = true,
> -};
> -
> -static const struct of_device_id atmel_twi_dt_ids[] = {
> - {
> - .compatible = "atmel,at91rm9200-i2c",
> - .data = &at91rm9200_config,
> - } , {
> - .compatible = "atmel,at91sam9260-i2c",
> - .data = &at91sam9260_config,
> - } , {
> - .compatible = "atmel,at91sam9261-i2c",
> - .data = &at91sam9261_config,
> - } , {
> - .compatible = "atmel,at91sam9g20-i2c",
> - .data = &at91sam9g20_config,
> - } , {
> - .compatible = "atmel,at91sam9g10-i2c",
> - .data = &at91sam9g10_config,
> - }, {
> - .compatible = "atmel,at91sam9x5-i2c",
> - .data = &at91sam9x5_config,
> - }, {
> - .compatible = "atmel,sama5d4-i2c",
> - .data = &sama5d4_config,
> - }, {
> - .compatible = "atmel,sama5d2-i2c",
> - .data = &sama5d2_config,
> - }, {
> - /* sentinel */
> - }
> -};
> -MODULE_DEVICE_TABLE(of, atmel_twi_dt_ids);
> -#endif
> -
> -static int at91_twi_configure_dma(struct at91_twi_dev *dev, u32 phy_addr)
> -{
> - int ret = 0;
> - struct dma_slave_config slave_config;
> - struct at91_twi_dma *dma = &dev->dma;
> - enum dma_slave_buswidth addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
> -
> - /*
> - * The actual width of the access will be chosen in
> - * dmaengine_prep_slave_sg():
> - * for each buffer in the scatter-gather list, if its size is aligned
> - * to addr_width then addr_width accesses will be performed to transfer
> - * the buffer. On the other hand, if the buffer size is not aligned to
> - * addr_width then the buffer is transferred using single byte accesses.
> - * Please refer to the Atmel eXtended DMA controller driver.
> - * When FIFOs are used, the TXRDYM threshold can always be set to
> - * trigger the XDMAC when at least 4 data can be written into the TX
> - * FIFO, even if single byte accesses are performed.
> - * However the RXRDYM threshold must be set to fit the access width,
> - * deduced from buffer length, so the XDMAC is triggered properly to
> - * read data from the RX FIFO.
> - */
> - if (dev->fifo_size)
> - addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
> -
> - memset(&slave_config, 0, sizeof(slave_config));
> - slave_config.src_addr = (dma_addr_t)phy_addr + AT91_TWI_RHR;
> - slave_config.src_addr_width = addr_width;
> - slave_config.src_maxburst = 1;
> - slave_config.dst_addr = (dma_addr_t)phy_addr + AT91_TWI_THR;
> - slave_config.dst_addr_width = addr_width;
> - slave_config.dst_maxburst = 1;
> - slave_config.device_fc = false;
> -
> - dma->chan_tx = dma_request_slave_channel_reason(dev->dev, "tx");
> - if (IS_ERR(dma->chan_tx)) {
> - ret = PTR_ERR(dma->chan_tx);
> - dma->chan_tx = NULL;
> - goto error;
> - }
> -
> - dma->chan_rx = dma_request_slave_channel_reason(dev->dev, "rx");
> - if (IS_ERR(dma->chan_rx)) {
> - ret = PTR_ERR(dma->chan_rx);
> - dma->chan_rx = NULL;
> - goto error;
> - }
> -
> - slave_config.direction = DMA_MEM_TO_DEV;
> - if (dmaengine_slave_config(dma->chan_tx, &slave_config)) {
> - dev_err(dev->dev, "failed to configure tx channel\n");
> - ret = -EINVAL;
> - goto error;
> - }
> -
> - slave_config.direction = DMA_DEV_TO_MEM;
> - if (dmaengine_slave_config(dma->chan_rx, &slave_config)) {
> - dev_err(dev->dev, "failed to configure rx channel\n");
> - ret = -EINVAL;
> - goto error;
> - }
> -
> - sg_init_table(dma->sg, 2);
> - dma->buf_mapped = false;
> - dma->xfer_in_progress = false;
> - dev->use_dma = true;
> -
> - dev_info(dev->dev, "using %s (tx) and %s (rx) for DMA transfers\n",
> - dma_chan_name(dma->chan_tx), dma_chan_name(dma->chan_rx));
> -
> - return ret;
> -
> -error:
> - if (ret != -EPROBE_DEFER)
> - dev_info(dev->dev, "can't get DMA channel, continue without DMA support\n");
> - if (dma->chan_rx)
> - dma_release_channel(dma->chan_rx);
> - if (dma->chan_tx)
> - dma_release_channel(dma->chan_tx);
> - return ret;
> -}
> -
> -static struct at91_twi_pdata *at91_twi_get_driver_data(
> - struct platform_device *pdev)
> -{
> - if (pdev->dev.of_node) {
> - const struct of_device_id *match;
> - match = of_match_node(atmel_twi_dt_ids, pdev->dev.of_node);
> - if (!match)
> - return NULL;
> - return (struct at91_twi_pdata *)match->data;
> - }
> - return (struct at91_twi_pdata *) platform_get_device_id(pdev)->driver_data;
> -}
> -
> -static int at91_twi_probe_master(struct platform_device *pdev,
> - u32 phy_addr, struct at91_twi_dev *dev)
> -{
> - int rc;
> - u32 bus_clk_rate;
> -
> - init_completion(&dev->cmd_complete);
> -
> - rc = devm_request_irq(&pdev->dev, dev->irq, atmel_twi_interrupt, 0,
> - dev_name(dev->dev), dev);
> - if (rc) {
> - dev_err(dev->dev, "Cannot get irq %d: %d\n", dev->irq, rc);
> - return rc;
> - }
> -
> - if (dev->dev->of_node) {
> - rc = at91_twi_configure_dma(dev, phy_addr);
> - if (rc == -EPROBE_DEFER)
> - return rc;
> - }
> -
> - if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
> - &dev->fifo_size)) {
> - dev_info(dev->dev, "Using FIFO (%u data)\n", dev->fifo_size);
> - }
> -
> - rc = of_property_read_u32(dev->dev->of_node, "clock-frequency",
> - &bus_clk_rate);
> - if (rc)
> - bus_clk_rate = DEFAULT_TWI_CLK_HZ;
> -
> - at91_calc_twi_clock(dev, bus_clk_rate);
> -
> - dev->adapter.algo = &at91_twi_algorithm;
> - dev->adapter.quirks = &at91_twi_quirks;
> -
> - return 0;
> -}
> -
> -static int at91_twi_probe(struct platform_device *pdev)
> -{
> - struct at91_twi_dev *dev;
> - struct resource *mem;
> - int rc;
> - u32 phy_addr;
> -
> - dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_KERNEL);
> - if (!dev)
> - return -ENOMEM;
> -
> - dev->dev = &pdev->dev;
> -
> - mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> - if (!mem)
> - return -ENODEV;
> - phy_addr = mem->start;
> -
> - dev->pdata = at91_twi_get_driver_data(pdev);
> - if (!dev->pdata)
> - return -ENODEV;
> -
> - dev->base = devm_ioremap_resource(&pdev->dev, mem);
> - if (IS_ERR(dev->base))
> - return PTR_ERR(dev->base);
> -
> - dev->irq = platform_get_irq(pdev, 0);
> - if (dev->irq < 0)
> - return dev->irq;
> -
> - platform_set_drvdata(pdev, dev);
> -
> - dev->clk = devm_clk_get(dev->dev, NULL);
> - if (IS_ERR(dev->clk)) {
> - dev_err(dev->dev, "no clock defined\n");
> - return -ENODEV;
> - }
> - rc = clk_prepare_enable(dev->clk);
> - if (rc)
> - return rc;
> -
> - snprintf(dev->adapter.name, sizeof(dev->adapter.name), "AT91");
> - i2c_set_adapdata(&dev->adapter, dev);
> - dev->adapter.owner = THIS_MODULE;
> - dev->adapter.class = I2C_CLASS_DEPRECATED;
> - dev->adapter.dev.parent = dev->dev;
> - dev->adapter.nr = pdev->id;
> - dev->adapter.timeout = AT91_I2C_TIMEOUT;
> - dev->adapter.dev.of_node = pdev->dev.of_node;
> -
> - rc = at91_twi_probe_master(pdev, phy_addr, dev);
> - if (rc)
> - return rc;
> -
> - at91_init_twi_bus(dev);
> -
> - pm_runtime_set_autosuspend_delay(dev->dev, AUTOSUSPEND_TIMEOUT);
> - pm_runtime_use_autosuspend(dev->dev);
> - pm_runtime_set_active(dev->dev);
> - pm_runtime_enable(dev->dev);
> -
> - rc = i2c_add_numbered_adapter(&dev->adapter);
> - if (rc) {
> - clk_disable_unprepare(dev->clk);
> -
> - pm_runtime_disable(dev->dev);
> - pm_runtime_set_suspended(dev->dev);
> -
> - return rc;
> - }
> -
> - dev_info(dev->dev, "AT91 i2c bus driver (hw version: %#x).\n",
> - at91_twi_read(dev, AT91_TWI_VER));
> - return 0;
> -}
> -
> -static int at91_twi_remove(struct platform_device *pdev)
> -{
> - struct at91_twi_dev *dev = platform_get_drvdata(pdev);
> -
> - i2c_del_adapter(&dev->adapter);
> - clk_disable_unprepare(dev->clk);
> -
> - pm_runtime_disable(dev->dev);
> - pm_runtime_set_suspended(dev->dev);
> -
> - return 0;
> -}
> -
> -#ifdef CONFIG_PM
> -
> -static int at91_twi_runtime_suspend(struct device *dev)
> -{
> - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> -
> - clk_disable_unprepare(twi_dev->clk);
> -
> - pinctrl_pm_select_sleep_state(dev);
> -
> - return 0;
> -}
> -
> -static int at91_twi_runtime_resume(struct device *dev)
> -{
> - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> -
> - pinctrl_pm_select_default_state(dev);
> -
> - return clk_prepare_enable(twi_dev->clk);
> -}
> -
> -static int at91_twi_suspend_noirq(struct device *dev)
> -{
> - if (!pm_runtime_status_suspended(dev))
> - at91_twi_runtime_suspend(dev);
> -
> - return 0;
> -}
> -
> -static int at91_twi_resume_noirq(struct device *dev)
> -{
> - struct at91_twi_dev *twi_dev = dev_get_drvdata(dev);
> - int ret;
> -
> - if (!pm_runtime_status_suspended(dev)) {
> - ret = at91_twi_runtime_resume(dev);
> - if (ret)
> - return ret;
> - }
> -
> - pm_runtime_mark_last_busy(dev);
> - pm_request_autosuspend(dev);
> -
> - at91_init_twi_bus(twi_dev);
> -
> - return 0;
> -}
> -
> -static const struct dev_pm_ops at91_twi_pm = {
> - .suspend_noirq = at91_twi_suspend_noirq,
> - .resume_noirq = at91_twi_resume_noirq,
> - .runtime_suspend = at91_twi_runtime_suspend,
> - .runtime_resume = at91_twi_runtime_resume,
> -};
> -
> -#define at91_twi_pm_ops (&at91_twi_pm)
> -#else
> -#define at91_twi_pm_ops NULL
> -#endif
> -
> -static struct platform_driver at91_twi_driver = {
> - .probe = at91_twi_probe,
> - .remove = at91_twi_remove,
> - .id_table = at91_twi_devtypes,
> - .driver = {
> - .name = "at91_i2c",
> - .of_match_table = of_match_ptr(atmel_twi_dt_ids),
> - .pm = at91_twi_pm_ops,
> - },
> -};
> -
> -static int __init at91_twi_init(void)
> -{
> - return platform_driver_register(&at91_twi_driver);
> -}
> -
> -static void __exit at91_twi_exit(void)
> -{
> - platform_driver_unregister(&at91_twi_driver);
> -}
> -
> -subsys_initcall(at91_twi_init);
> -module_exit(at91_twi_exit);
> -
> -MODULE_AUTHOR("Nikolaus Voss <n.voss@...nmann.de>");
> -MODULE_DESCRIPTION("I2C (TWI) driver for Atmel AT91");
> -MODULE_LICENSE("GPL");
> -MODULE_ALIAS("platform:at91_i2c");
> diff --git a/drivers/i2c/busses/i2c-at91.h b/drivers/i2c/busses/i2c-at91.h
> new file mode 100644
> index 0000000..555b167
> --- /dev/null
> +++ b/drivers/i2c/busses/i2c-at91.h
> @@ -0,0 +1,151 @@
> +/*
> + * i2c Support for Atmel's AT91 Two-Wire Interface (TWI)
> + *
> + * Copyright (C) 2011 Weinmann Medical GmbH
> + * Author: Nikolaus Voss <n.voss@...nmann.de>
> + *
> + * Evolved from original work by:
> + * Copyright (C) 2004 Rick Bronson
> + * Converted to 2.6 by Andrew Victor <andrew@...people.com>
> + *
> + * Borrowed heavily from original work by:
> + * Copyright (C) 2000 Philip Edelbrock <phil@...mpy.netroedge.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/completion.h>
> +#include <linux/dma-mapping.h>
> +#include <linux/dmaengine.h>
> +#include <linux/i2c.h>
> +#include <linux/platform_data/dma-atmel.h>
> +#include <linux/platform_device.h>
> +
> +#define DEFAULT_TWI_CLK_HZ 100000 /* max 400 Kbits/s */
> +#define AT91_I2C_TIMEOUT msecs_to_jiffies(100) /* transfer timeout */
> +#define AT91_I2C_DMA_THRESHOLD 8 /* enable DMA if transfer size is bigger than this threshold */
> +#define AUTOSUSPEND_TIMEOUT 2000
> +#define AT91_I2C_MAX_ALT_CMD_DATA_SIZE 256
> +
> +/* AT91 TWI register definitions */
> +#define AT91_TWI_CR 0x0000 /* Control Register */
> +#define AT91_TWI_START BIT(0) /* Send a Start Condition */
> +#define AT91_TWI_STOP BIT(1) /* Send a Stop Condition */
> +#define AT91_TWI_MSEN BIT(2) /* Master Transfer Enable */
> +#define AT91_TWI_MSDIS BIT(3) /* Master Transfer Disable */
> +#define AT91_TWI_SVEN BIT(4) /* Slave Transfer Enable */
> +#define AT91_TWI_SVDIS BIT(5) /* Slave Transfer Disable */
> +#define AT91_TWI_QUICK BIT(6) /* SMBus quick command */
> +#define AT91_TWI_SWRST BIT(7) /* Software Reset */
> +#define AT91_TWI_ACMEN BIT(16) /* Alternative Command Mode Enable */
> +#define AT91_TWI_ACMDIS BIT(17) /* Alternative Command Mode Disable */
> +#define AT91_TWI_THRCLR BIT(24) /* Transmit Holding Register Clear */
> +#define AT91_TWI_RHRCLR BIT(25) /* Receive Holding Register Clear */
> +#define AT91_TWI_LOCKCLR BIT(26) /* Lock Clear */
> +#define AT91_TWI_FIFOEN BIT(28) /* FIFO Enable */
> +#define AT91_TWI_FIFODIS BIT(29) /* FIFO Disable */
> +
> +#define AT91_TWI_MMR 0x0004 /* Master Mode Register */
> +#define AT91_TWI_IADRSZ_1 0x0100 /* Internal Device Address Size */
> +#define AT91_TWI_MREAD BIT(12) /* Master Read Direction */
> +
> +#define AT91_TWI_IADR 0x000c /* Internal Address Register */
> +
> +#define AT91_TWI_CWGR 0x0010 /* Clock Waveform Generator Reg */
> +#define AT91_TWI_CWGR_HOLD_MAX 0x1f
> +#define AT91_TWI_CWGR_HOLD(x) (((x) & AT91_TWI_CWGR_HOLD_MAX) << 24)
> +
> +#define AT91_TWI_SR 0x0020 /* Status Register */
> +#define AT91_TWI_TXCOMP BIT(0) /* Transmission Complete */
> +#define AT91_TWI_RXRDY BIT(1) /* Receive Holding Register Ready */
> +#define AT91_TWI_TXRDY BIT(2) /* Transmit Holding Register Ready */
> +#define AT91_TWI_OVRE BIT(6) /* Overrun Error */
> +#define AT91_TWI_UNRE BIT(7) /* Underrun Error */
> +#define AT91_TWI_NACK BIT(8) /* Not Acknowledged */
> +#define AT91_TWI_LOCK BIT(23) /* TWI Lock due to Frame Errors */
> +
> +#define AT91_TWI_INT_MASK \
> + (AT91_TWI_TXCOMP | AT91_TWI_RXRDY | AT91_TWI_TXRDY | AT91_TWI_NACK)
> +
> +#define AT91_TWI_IER 0x0024 /* Interrupt Enable Register */
> +#define AT91_TWI_IDR 0x0028 /* Interrupt Disable Register */
> +#define AT91_TWI_IMR 0x002c /* Interrupt Mask Register */
> +#define AT91_TWI_RHR 0x0030 /* Receive Holding Register */
> +#define AT91_TWI_THR 0x0034 /* Transmit Holding Register */
> +
> +#define AT91_TWI_ACR 0x0040 /* Alternative Command Register */
> +#define AT91_TWI_ACR_DATAL(len) ((len) & 0xff)
> +#define AT91_TWI_ACR_DIR BIT(8)
> +
> +#define AT91_TWI_FMR 0x0050 /* FIFO Mode Register */
> +#define AT91_TWI_FMR_TXRDYM(mode) (((mode) & 0x3) << 0)
> +#define AT91_TWI_FMR_TXRDYM_MASK (0x3 << 0)
> +#define AT91_TWI_FMR_RXRDYM(mode) (((mode) & 0x3) << 4)
> +#define AT91_TWI_FMR_RXRDYM_MASK (0x3 << 4)
> +#define AT91_TWI_ONE_DATA 0x0
> +#define AT91_TWI_TWO_DATA 0x1
> +#define AT91_TWI_FOUR_DATA 0x2
> +
> +#define AT91_TWI_FLR 0x0054 /* FIFO Level Register */
> +
> +#define AT91_TWI_FSR 0x0060 /* FIFO Status Register */
> +#define AT91_TWI_FIER 0x0064 /* FIFO Interrupt Enable Register */
> +#define AT91_TWI_FIDR 0x0068 /* FIFO Interrupt Disable Register */
> +#define AT91_TWI_FIMR 0x006c /* FIFO Interrupt Mask Register */
> +
> +#define AT91_TWI_VER 0x00fc /* Version Register */
> +
> +struct at91_twi_pdata {
> + unsigned clk_max_div;
> + unsigned clk_offset;
> + bool has_unre_flag;
> + bool has_alt_cmd;
> + bool has_hold_field;
> + struct at_dma_slave dma_slave;
> +};
> +
> +struct at91_twi_dma {
> + struct dma_chan *chan_rx;
> + struct dma_chan *chan_tx;
> + struct scatterlist sg[2];
> + struct dma_async_tx_descriptor *data_desc;
> + enum dma_data_direction direction;
> + bool buf_mapped;
> + bool xfer_in_progress;
> +};
> +
> +struct at91_twi_dev {
> + struct device *dev;
> + void __iomem *base;
> + struct completion cmd_complete;
> + struct clk *clk;
> + u8 *buf;
> + size_t buf_len;
> + struct i2c_msg *msg;
> + int irq;
> + unsigned imr;
> + unsigned transfer_status;
> + struct i2c_adapter adapter;
> + unsigned twi_cwgr_reg;
> + struct at91_twi_pdata *pdata;
> + bool use_dma;
> + bool use_alt_cmd;
> + bool recv_len_abort;
> + u32 fifo_size;
> + struct at91_twi_dma dma;
> +};
> +
> +unsigned at91_twi_read(struct at91_twi_dev *dev, unsigned reg);
> +void at91_twi_write(struct at91_twi_dev *dev, unsigned reg, unsigned val);
> +void at91_disable_twi_interrupts(struct at91_twi_dev *dev);
> +void at91_twi_irq_save(struct at91_twi_dev *dev);
> +void at91_twi_irq_restore(struct at91_twi_dev *dev);
> +void at91_init_twi_bus(struct at91_twi_dev *dev);
> +
> +void at91_init_twi_bus_master(struct at91_twi_dev *dev);
> +int at91_twi_probe_master(struct platform_device *pdev, u32 phy_addr,
> + struct at91_twi_dev *dev);
> --
> 2.7.4
>
Powered by blists - more mailing lists