[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1509479663-8985-4-git-send-email-manivannan.sadhasivam@linaro.org>
Date: Wed, 1 Nov 2017 01:24:23 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: mturquette@...libre.com, sboyd@...eaurora.org, afaerber@...e.de,
robh+dt@...nel.org, mark.rutland@....com
Cc: linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
davem@...emloft.net, mchehab@...nel.org, rdunlap@...radead.org,
daniel.thompson@...aro.org, amit.kucheria@...aro.org,
liuwei@...ions-semi.com,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
Subject: [PATCH 3/3] Documentation: add Actions S900 clock bindings
This patch adds clock bindings for Actions Semi S900 SoC.
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
---
.../bindings/clock/actions,s900-clock.txt | 47 ++++++++++++++++++++++
1 file changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/actions,s900-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/actions,s900-clock.txt b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
new file mode 100644
index 0000000..951d6ad
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/actions,s900-clock.txt
@@ -0,0 +1,47 @@
+* Actions s900 Clock Controller
+
+The Actions s900 clock controller generates and supplies clock to various
+controllers within the SoC. The clock binding described here is applicable to
+s900 SoC.
+
+Required Properties:
+
+- compatible: should be "actions,s900-clock"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- #clock-cells: should be 1.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume.
+
+All available clocks are defined as preprocessor macros in
+dt-bindings/clock/actions,s900-clock.h header and can be used in device
+tree sources.
+
+External clocks:
+
+The hosc clock used as input for the plls is generated outside the SoC. It is
+expected that it is defined using standard clock bindings as "hosc".
+
+Actions s900 Clock Controller also require two more clocks:
+ - "losc" - internal low frequency oscillator
+ - "diff_24M" - internal differential 24MHz clock
+
+Example: Clock controller node:
+
+ clock: clock-controller@...60000 {
+ compatible = "actions,s900-clock";
+ reg = <0 0xe0160000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+Example: UART controller node that consumes clock generated by the clock
+controller:
+
+ serial5: uart@...2a000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012a000 0x0 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clock CLK_UART5>;
+ clock-names = "uart";
+ };
--
2.7.4
Powered by blists - more mailing lists