| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Fri, 3 Nov 2017 15:12:13 +0800
From: Lei YU <mine260309@...il.com>
To: Guenter Roeck <linux@...ck-us.net>
Cc: Jean Delvare <jdelvare@...e.com>, linux-kernel@...r.kernel.org,
linux-hwmon@...r.kernel.org, Joel Stanley <joel@....id.au>,
Andrew Jeffery <andrew@...id.au>
Subject: Re: [PATCH 1/2] drivers: hwmon: Add W83773G driver
On Thu, Nov 2, 2017 at 10:04 PM, Guenter Roeck <linux@...ck-us.net> wrote:
> On 11/01/2017 11:33 PM, Lei YU wrote:
>>
>> Nuvoton W83773G is a hardware monitor IC providing one local
>> temperature and two remote temperature sensors.
>>
> This chip is pretty close to LM90. Have you explored adding support for it
> to the LM90 driver ?
Thanks for the info.
After checking the driver of lm90, I find several differences:
1. Most of devices in lm90.c have one local and one remote sensor;
Only MAX6695/MAX6696 support two remote sensors;
2. Most of the devices in lm90.c support ALERT, Hight/Low limit.
Especially for 1. MAX6695/6696 needs to write config register to switch between
the two remote sensors by lm90_select_remote_channel();
While W83773G has two set of registers for the two remote sensors;
The code to support two remote sensors would be different.
So I would prefer to have a separated driver code for this.
What do you think?
Thanks!
>
>
>> Signed-off-by: Lei YU <mine260309@...il.com>
>> ---
>> drivers/hwmon/Kconfig | 11 ++
>> drivers/hwmon/Makefile | 1 +
>> drivers/hwmon/w83773g.c | 276
>> ++++++++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 288 insertions(+)
>> create mode 100644 drivers/hwmon/w83773g.c
>>
>> diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig
>> index d654314..d148b70 100644
>> --- a/drivers/hwmon/Kconfig
>> +++ b/drivers/hwmon/Kconfig
>> @@ -1710,6 +1710,17 @@ config SENSORS_VT8231
>> This driver can also be built as a module. If so, the module
>> will be called vt8231.
>> +config SENSORS_W83773G
>> + tristate "Nuvoton W83773G"
>> + depends on I2C
>> + select HWMON_VID
>> + help
>> + If you say yes here you get support for the Nuvoton W83773G
>> hardware
>> + monitoring chip.
>> +
>> + This driver can also be built as a module. If so, the module
>> + will be called w83773g.
>> +
>> config SENSORS_W83781D
>> tristate "Winbond W83781D, W83782D, W83783S, Asus AS99127F"
>> depends on I2C
>> diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile
>> index c84d978..0649ad8 100644
>> --- a/drivers/hwmon/Makefile
>> +++ b/drivers/hwmon/Makefile
>> @@ -13,6 +13,7 @@ obj-$(CONFIG_SENSORS_ATK0110) += asus_atk0110.o
>> # asb100, then w83781d go first, as they can override other drivers'
>> addresses.
>> obj-$(CONFIG_SENSORS_ASB100) += asb100.o
>> obj-$(CONFIG_SENSORS_W83627HF) += w83627hf.o
>> +obj-$(CONFIG_SENSORS_W83773G) += w83773g.o
>> obj-$(CONFIG_SENSORS_W83792D) += w83792d.o
>> obj-$(CONFIG_SENSORS_W83793) += w83793.o
>> obj-$(CONFIG_SENSORS_W83795) += w83795.o
>> diff --git a/drivers/hwmon/w83773g.c b/drivers/hwmon/w83773g.c
>> new file mode 100644
>> index 0000000..16d5fa0
>> --- /dev/null
>> +++ b/drivers/hwmon/w83773g.c
>> @@ -0,0 +1,276 @@
>> +/*
>> + * Copyright (C) 2017 IBM Corp.
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License, or
>> + * (at your option) any later version.
>> + *
>> + */
>> +
>> +/*
>> + * Driver for the Nuvoton W83773G SMBus temperature sensor IC.
>> + * Supported models: W83773G
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/init.h>
>> +#include <linux/slab.h>
>> +#include <linux/jiffies.h>
>> +#include <linux/i2c.h>
>> +#include <linux/hwmon.h>
>> +#include <linux/hwmon-sysfs.h>
>> +#include <linux/err.h>
>> +#include <linux/mutex.h>
>> +#include <linux/of_device.h>
>> +#include <linux/sysfs.h>
>> +
>> +/* Addresses to scan */
>> +static const unsigned short normal_i2c[] = { 0x4c, 0x4d, I2C_CLIENT_END
>> };
>> +
>> +enum chips { w83773g };
>> +
>> +/* The W83773 registers */
>> +#define W83773_CONVERSION_RATE_REG_READ 0x04
>> +#define W83773_CONVERSION_RATE_REG_WRITE 0x0A
>> +#define W83773_MANUFACTURER_ID_REG 0xFE
>> +#define W83773_LOCAL_TEMP 0x00
>> +
>> +static const u8 W83773_STATUS[2] = { 0x02, 0x17 };
>> +
>> +static const u8 W83773_TEMP_LSB[2] = { 0x10, 0x25 };
>> +static const u8 W83773_TEMP_MSB[2] = { 0x01, 0x24 };
>> +
>> +static const u8 W83773_OFFSET_LSB[2] = { 0x12, 0x16 };
>> +static const u8 W83773_OFFSET_MSB[2] = { 0x11, 0x15 };
>> +
>> +/* Manufacturer / Device ID's */
>> +#define W83773_MANUFACTURER_ID 0x5c
>> +
>> +
>> +/* this is the number of sensors in the device */
>> +static const struct i2c_device_id w83773_id[] = {
>> + { "w83773g", 3 },
>> + { }
>> +};
>> +
>> +MODULE_DEVICE_TABLE(i2c, w83773_id);
>> +
>> +static const struct of_device_id w83773_of_match[] = {
>> + {
>> + .compatible = "nuvoton,w83773g",
>> + .data = (void *)3
>> + },
>> +
>> + { },
>> +};
>> +MODULE_DEVICE_TABLE(of, w83773_of_match);
>> +
>> +/*
>> + * W83773G has 3 temp sensors:
>> + * Channel 0 is the local sensor
>> + * Channel 1-2 are two remote sensors
>> + */
>> +struct w83773_data {
>> + struct i2c_client *client;
>> + struct mutex update_lock;
>> + u32 temp_config[4];
>> + struct hwmon_channel_info temp_info;
>> + const struct hwmon_channel_info *info[2];
>> + struct hwmon_chip_info chip;
>> + bool valid;
>> + unsigned long last_updated;
>> + int channels;
>> + s8 temp_local;
>> + s8 status[2];
>> + s8 temp_hb[2];
>> + s8 temp_lb[2];
>> + s8 offset_hb[2];
>> + s8 offset_lb[2];
>> +};
>> +
>> +static long temp_of_local(s8 reg)
>> +{
>> + return reg * 1000;
>> +}
>> +
>> +static long temp_of_remote(s8 hb, s8 lb, s8 offset_hb, s8 offset_lb)
>> +{
>> + return (hb + offset_hb) * 1000 + ((u8)(lb + offset_lb) >> 5) *
>> 125;
>> +}
>> +
>> +
>> +static struct w83773_data *w83773_update_device(struct device *dev)
>> +{
>> + struct w83773_data *data = dev_get_drvdata(dev);
>> + struct i2c_client *client = data->client;
>> + int i;
>> +
>> + mutex_lock(&data->update_lock);
>> +
>> + if (time_after(jiffies, data->last_updated + 2 * HZ) ||
>> !data->valid) {
>> + data->temp_local = i2c_smbus_read_byte_data(client,
>> W83773_LOCAL_TEMP);
>> + for (i = 0; i < data->channels - 1; i++) {
>> + data->status[i] = i2c_smbus_read_byte_data(client,
>> W83773_STATUS[i]);
>> + data->temp_hb[i] =
>> i2c_smbus_read_byte_data(client, W83773_TEMP_MSB[i]);
>> + data->temp_lb[i] =
>> i2c_smbus_read_byte_data(client, W83773_TEMP_LSB[i]);
>> + data->offset_hb[i] =
>> i2c_smbus_read_byte_data(client, W83773_OFFSET_MSB[i]);
>> + data->offset_lb[i] =
>> i2c_smbus_read_byte_data(client, W83773_OFFSET_LSB[i]);
>> + }
>> + data->last_updated = jiffies;
>> + data->valid = true;
>> + }
>> +
>> + mutex_unlock(&data->update_lock);
>> +
>> + return data;
>> +}
>> +
>> +static int w83773_read(struct device *dev, enum hwmon_sensor_types type,
>> + u32 attr, int channel, long *val)
>> +{
>> + struct w83773_data *w83773 = w83773_update_device(dev);
>> +
>> + switch (attr) {
>> + case hwmon_temp_input:
>> + if (channel == 0) {
>> + /* channel 0 is the local temp */
>> + *val = temp_of_local(w83773->temp_local);
>> + }
>> + else {
>> + /* channel 1-2 are the remote temps */
>> + channel--;
>> + *val = temp_of_remote(
>> + w83773->temp_hb[channel],
>> + w83773->temp_lb[channel],
>> + w83773->offset_hb[channel],
>> + w83773->offset_lb[channel]);
>> + }
>> + return 0;
>> + case hwmon_temp_fault:
>> + if (channel == 0)
>> + *val = 0;
>> + else
>> + /* Check the status register bit 2 for faults */
>> + *val = (w83773->status[channel - 1] & 0x04) >> 2;
>> + return 0;
>> + default:
>> + return -EOPNOTSUPP;
>> + }
>> +
>> +}
>> +
>> +static umode_t w83773_is_visible(const void *data, enum
>> hwmon_sensor_types type,
>> + u32 attr, int channel)
>> +{
>> + switch (attr) {
>> + case hwmon_temp_fault:
>> + if (channel == 0)
>> + return 0;
>> + return S_IRUGO;
>> + case hwmon_temp_input:
>> + return S_IRUGO;
>> + default:
>> + return 0;
>> + }
>> +}
>> +
>> +static int w83773_init_client(struct i2c_client *client)
>> +{
>> + /* Set the conversion rate to 2 Hz */
>> + i2c_smbus_write_byte_data(client,
>> W83773_CONVERSION_RATE_REG_WRITE, 0x05);
>> +
>> + return 0;
>> +}
>> +
>> +static int w83773_detect(struct i2c_client *client,
>> + struct i2c_board_info *info)
>> +{
>> + enum chips kind;
>> + struct i2c_adapter *adapter = client->adapter;
>> + const char * const names[] = { "W83773G" };
>> + u8 reg;
>> +
>> + if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA))
>> + return -ENODEV;
>> +
>> + reg = i2c_smbus_read_byte_data(client,
>> W83773_MANUFACTURER_ID_REG);
>> + if (reg != W83773_MANUFACTURER_ID)
>> + return -ENODEV;
>> +
>> + reg = i2c_smbus_read_byte_data(client,
>> W83773_CONVERSION_RATE_REG_READ);
>> + if (reg & 0xf8)
>> + return -ENODEV;
>> +
>> + kind = w83773g;
>> +
>> + strlcpy(info->type, w83773_id[kind].name, I2C_NAME_SIZE);
>> + dev_info(&adapter->dev, "Detected Nuvoton %s chip at 0x%02x\n",
>> + names[kind], client->addr);
>> +
>> + return 0;
>> +}
>> +
>> +static const struct hwmon_ops w83773_ops = {
>> + .is_visible = w83773_is_visible,
>> + .read = w83773_read,
>> +};
>> +
>> +static int w83773_probe(struct i2c_client *client,
>> + const struct i2c_device_id *id)
>> +{
>> + struct device *dev = &client->dev;
>> + struct device *hwmon_dev;
>> + struct w83773_data *data;
>> + int i, err;
>> +
>> + data = devm_kzalloc(dev, sizeof(struct w83773_data), GFP_KERNEL);
>> + if (!data)
>> + return -ENOMEM;
>> +
>> + mutex_init(&data->update_lock);
>> + if (client->dev.of_node)
>> + data->channels =
>> (int)of_device_get_match_data(&client->dev);
>> + else
>> + data->channels = id->driver_data;
>> + data->client = client;
>> +
>> + err = w83773_init_client(client);
>> + if (err)
>> + return err;
>> +
>> + for (i = 0; i < data->channels; i++)
>> + data->temp_config[i] = HWMON_T_INPUT | HWMON_T_FAULT;
>> +
>> + data->chip.ops = &w83773_ops;
>> + data->chip.info = data->info;
>> +
>> + data->info[0] = &data->temp_info;
>> +
>> + data->temp_info.type = hwmon_temp;
>> + data->temp_info.config = data->temp_config;
>> +
>> + hwmon_dev = devm_hwmon_device_register_with_info(dev,
>> client->name,
>> + data,
>> + &data->chip,
>> + NULL);
>> + return PTR_ERR_OR_ZERO(hwmon_dev);
>> +}
>> +
>> +static struct i2c_driver w83773_driver = {
>> + .class = I2C_CLASS_HWMON,
>> + .driver = {
>> + .name = "w83773g",
>> + .of_match_table = of_match_ptr(w83773_of_match),
>> + },
>> + .probe = w83773_probe,
>> + .id_table = w83773_id,
>> + .detect = w83773_detect,
>> + .address_list = normal_i2c,
>> +};
>> +
>> +module_i2c_driver(w83773_driver);
>> +
>> +MODULE_AUTHOR("Nickolaus Gruendler <ngruend@...ibm.com>");
>> +MODULE_DESCRIPTION("W83773G temperature sensor driver");
>> +MODULE_LICENSE("GPL");
>>
>
Powered by blists - more mailing lists