lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Sat,  4 Nov 2017 04:16:12 -0700
From:   Andy Lutomirski <luto@...nel.org>
To:     X86 ML <x86@...nel.org>
Cc:     Borislav Petkov <bpetkov@...e.de>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Andy Lutomirski <luto@...nel.org>
Subject: [PATCH urgent] Revert "x86/mm: Stop calling leave_mm() in idle code"

This reverts commit 43858b4f25cf0adc5c2ca9cf5ce5fdf2532941e5.

The reason I removed the leave_mm() calls in question is because the
heuristic wasn't needed after that patch.  With the original version
of my PCID series, we never flushed a "lazy cpu" (i.e. a CPU running
kernel thread) due a flush on the loaded mm.

Unfortunately, that caused architectural issues, so now I've
reinstated these flushes on non-PCID systems in

    commit b956575bed91 ("x86/mm: Flush more aggressively in lazy TLB mode").

That, in turn, gives us a power management and occasionally
performance regression as compared to old kernels: a process that
goes into a deep idle state on a given CPU and gets its mm flushed
due to activity on a different CPU will wake the idle CPU.

Reinstate the old ugly heuristic: if a CPU goes into ACPI C3 or an
intel_idle state that is likely to cause a TLB flush gets its mm
switched to init_mm before going idle.

FWIW, this heuristic is lousy.  Whether we should change CR3 before
idle isn't a good hint except insofar as the performance hit is a bit
lower if the TLB is getting flushed by the idle code anyway.  What we
really want to know is whether we anticipate being idle long enough
that the mm is likely to be flushed before we wake up.  Ths is more a
matter of the expected latency than the idle state that gets chosen.
This heuristic also completely fails on systems that don't know
whether the TLB will be flushed (e.g. AMD systems?).  OTOH it may be a
bit obsolete anyway -- PCID systems don't presently benefit from this
heuristic at all.

We also shouldn't do this callback from innermost bit of the idle code
due to the RCU nastiness it causes.  All the information need is
available before rcu_idle_enter() needs to happen.

Fixes: 43858b4f25cf "x86/mm: Stop calling leave_mm() in idle code"
Signed-off-by: Andy Lutomirski <luto@...nel.org>
---

Sorry, got distracted by KS, travel, and entry stuff and didn't send
this.

 arch/ia64/include/asm/acpi.h  |  2 ++
 arch/x86/include/asm/acpi.h   |  2 ++
 arch/x86/mm/tlb.c             | 18 +++++++++++++++---
 drivers/acpi/processor_idle.c |  2 ++
 drivers/idle/intel_idle.c     |  9 +++++----
 5 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/arch/ia64/include/asm/acpi.h b/arch/ia64/include/asm/acpi.h
index c86a947f5368..a3d0211970e9 100644
--- a/arch/ia64/include/asm/acpi.h
+++ b/arch/ia64/include/asm/acpi.h
@@ -112,6 +112,8 @@ static inline void arch_acpi_set_pdc_bits(u32 *buf)
 	buf[2] |= ACPI_PDC_EST_CAPABILITY_SMP;
 }
 
+#define acpi_unlazy_tlb(x)
+
 #ifdef CONFIG_ACPI_NUMA
 extern cpumask_t early_cpu_possible_map;
 #define for_each_possible_early_cpu(cpu)  \
diff --git a/arch/x86/include/asm/acpi.h b/arch/x86/include/asm/acpi.h
index 72d867f6b518..8d0ec9df1cbe 100644
--- a/arch/x86/include/asm/acpi.h
+++ b/arch/x86/include/asm/acpi.h
@@ -150,6 +150,8 @@ static inline void disable_acpi(void) { }
 extern int x86_acpi_numa_init(void);
 #endif /* CONFIG_ACPI_NUMA */
 
+#define acpi_unlazy_tlb(x)	leave_mm(x)
+
 #ifdef CONFIG_ACPI_APEI
 static inline pgprot_t arch_apei_get_mem_attribute(phys_addr_t addr)
 {
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 0f3d0cea4d00..7b6444fd2f36 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -85,6 +85,7 @@ void leave_mm(int cpu)
 
 	switch_mm(NULL, &init_mm, NULL);
 }
+EXPORT_SYMBOL_GPL(leave_mm);
 
 void switch_mm(struct mm_struct *prev, struct mm_struct *next,
 	       struct task_struct *tsk)
@@ -195,12 +196,23 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
 			this_cpu_write(cpu_tlbstate.ctxs[new_asid].ctx_id, next->context.ctx_id);
 			this_cpu_write(cpu_tlbstate.ctxs[new_asid].tlb_gen, next_tlb_gen);
 			write_cr3(build_cr3(next, new_asid));
-			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH,
-					TLB_FLUSH_ALL);
+
+			/*
+			 * NB: This gets called via leave_mm() in the idle path
+			 * where RCU functions differently.  Tracing normally
+			 * uses RCU, so  we need to use the _rcuidle variant.
+			 *
+			 * (There is no good reason for this.  The idle code should
+			 *  be rearranged to call this before rcu_idle_enter().)
+			 */
+			trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH,
+						TLB_FLUSH_ALL);
 		} else {
 			/* The new ASID is already up to date. */
 			write_cr3(build_cr3_noflush(next, new_asid));
-			trace_tlb_flush(TLB_FLUSH_ON_TASK_SWITCH, 0);
+
+			/* See above wrt _rcuidle. */
+			trace_tlb_flush_rcuidle(TLB_FLUSH_ON_TASK_SWITCH, 0);
 		}
 
 		this_cpu_write(cpu_tlbstate.loaded_mm, next);
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index 2736e25e9dc6..d50a7b6ccddd 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -710,6 +710,8 @@ static DEFINE_RAW_SPINLOCK(c3_lock);
 static void acpi_idle_enter_bm(struct acpi_processor *pr,
 			       struct acpi_processor_cx *cx, bool timer_bc)
 {
+	acpi_unlazy_tlb(smp_processor_id());
+
 	/*
 	 * Must be done before busmaster disable as we might need to
 	 * access HPET !
diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c
index 5dc7ea4b6bc4..f0b06b14e782 100644
--- a/drivers/idle/intel_idle.c
+++ b/drivers/idle/intel_idle.c
@@ -913,15 +913,16 @@ static __cpuidle int intel_idle(struct cpuidle_device *dev,
 	struct cpuidle_state *state = &drv->states[index];
 	unsigned long eax = flg2MWAIT(state->flags);
 	unsigned int cstate;
+	int cpu = smp_processor_id();
 
 	cstate = (((eax) >> MWAIT_SUBSTATE_SIZE) & MWAIT_CSTATE_MASK) + 1;
 
 	/*
-	 * NB: if CPUIDLE_FLAG_TLB_FLUSHED is set, this idle transition
-	 * will probably flush the TLB.  It's not guaranteed to flush
-	 * the TLB, though, so it's not clear that we can do anything
-	 * useful with this knowledge.
+	 * leave_mm() to avoid costly and often unnecessary wakeups
+	 * for flushing the user TLB's associated with the active mm.
 	 */
+	if (state->flags & CPUIDLE_FLAG_TLB_FLUSHED)
+		leave_mm(cpu);
 
 	if (!(lapic_timer_reliable_states & (1 << (cstate))))
 		tick_broadcast_enter();
-- 
2.13.6

Powered by blists - more mailing lists