| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Mon, 6 Nov 2017 14:35:16 +0100
From: Arnd Bergmann <arnd@...db.de>
To: Sathya Prakash <sathya.prakash@...adcom.com>,
Chaitra P B <chaitra.basappa@...adcom.com>,
Suganath Prabu Subramani
<suganath-prabu.subramani@...adcom.com>,
"James E.J. Bottomley" <jejb@...ux.vnet.ibm.com>,
"Martin K. Petersen" <martin.petersen@...cle.com>
Cc: Arnd Bergmann <arnd@...db.de>, Tomas Henzl <thenzl@...hat.com>,
Sreekanth Reddy <sreekanth.reddy@...adcom.com>,
Hannes Reinecke <hare@...e.de>,
Romain Perier <romain.perier@...labora.com>,
James Bottomley <James.Bottomley@...senPartnership.com>,
Bart Van Assche <bart.vanassche@...disk.com>,
MPT-FusionLinux.pdl@...adcom.com, linux-scsi@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: [PATCH] mpt3sas: fix dma_addr_t casts
The newly added base_make_prp_nvme function triggers a build warning
on some 32-bit configurations:
drivers/scsi/mpt3sas/mpt3sas_base.c: In function 'base_make_prp_nvme':
drivers/scsi/mpt3sas/mpt3sas_base.c:1664:13: error: cast from pointer to integer of different size [-Werror=pointer-to-int-cast]
msg_phys = (dma_addr_t)mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
After taking a closer look, I found that the problem is that the new
code mixes up pointers and dma_addr_t values unnecessarily.
This changes it to use the correct types consistently, which lets us
get rid of a lot of type casts in the process. I'm also renaming some
variables to avoid confusion between physical and dma address spaces
that are often distinct.
Fixes: 016d5c35e278 ("scsi: mpt3sas: SGL to PRP Translation for I/Os to NVMe devices")
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/scsi/mpt3sas/mpt3sas_base.c | 62 +++++++++++++++++--------------------
drivers/scsi/mpt3sas/mpt3sas_base.h | 2 +-
2 files changed, 30 insertions(+), 34 deletions(-)
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.c b/drivers/scsi/mpt3sas/mpt3sas_base.c
index 7a3f4d14f260..8027de465d47 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.c
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.c
@@ -1437,11 +1437,11 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
size_t data_in_sz)
{
int prp_size = NVME_PRP_SIZE;
- __le64 *prp_entry, *prp1_entry, *prp2_entry, *prp_entry_phys;
- __le64 *prp_page, *prp_page_phys;
+ __le64 *prp_entry, *prp1_entry, *prp2_entry;
+ __le64 *prp_page;
+ dma_addr_t prp_entry_dma, prp_page_dma, dma_addr;
u32 offset, entry_len;
u32 page_mask_result, page_mask;
- dma_addr_t paddr;
size_t length;
/*
@@ -1465,7 +1465,7 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* contiguous memory.
*/
prp_page = (__le64 *)mpt3sas_base_get_pcie_sgl(ioc, smid);
- prp_page_phys = (__le64 *)mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+ prp_page_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
/*
* Check if we are within 1 entry of a page boundary we don't
@@ -1476,21 +1476,21 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
if (!page_mask_result) {
/* Bump up to next page boundary. */
prp_page = (__le64 *)((u8 *)prp_page + prp_size);
- prp_page_phys = (__le64 *)((u8 *)prp_page_phys + prp_size);
+ prp_page_dma = prp_page_dma + prp_size;
}
/*
* Set PRP physical pointer, which initially points to the current PRP
* DMA memory page.
*/
- prp_entry_phys = prp_page_phys;
+ prp_entry_dma = prp_page_dma;
/* Get physical address and length of the data buffer. */
if (data_in_sz) {
- paddr = data_in_dma;
+ dma_addr = data_in_dma;
length = data_in_sz;
} else {
- paddr = data_out_dma;
+ dma_addr = data_out_dma;
length = data_out_sz;
}
@@ -1500,8 +1500,7 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* Check if we need to put a list pointer here if we are at
* page boundary - prp_size (8 bytes).
*/
- page_mask_result =
- (uintptr_t)((u8 *)prp_entry_phys + prp_size) & page_mask;
+ page_mask_result = (prp_entry_dma + prp_size) & page_mask;
if (!page_mask_result) {
/*
* This is the last entry in a PRP List, so we need to
@@ -1515,13 +1514,13 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* contiguous, no need to get a new page - it's
* just the next address.
*/
- prp_entry_phys++;
- *prp_entry = cpu_to_le64((uintptr_t)prp_entry_phys);
+ prp_entry_dma++;
+ *prp_entry = cpu_to_le64(prp_entry_dma);
prp_entry++;
}
/* Need to handle if entry will be part of a page. */
- offset = (u32)paddr & page_mask;
+ offset = dma_addr & page_mask;
entry_len = ioc->page_size - offset;
if (prp_entry == prp1_entry) {
@@ -1529,7 +1528,7 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* Must fill in the first PRP pointer (PRP1) before
* moving on.
*/
- *prp1_entry = cpu_to_le64((u64)paddr);
+ *prp1_entry = cpu_to_le64(dma_addr);
/*
* Now point to the second PRP entry within the
@@ -1549,8 +1548,7 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* list will start at the beginning of the
* contiguous buffer.
*/
- *prp2_entry =
- cpu_to_le64((uintptr_t)prp_entry_phys);
+ *prp2_entry = cpu_to_le64(prp_entry_dma);
/*
* The next PRP Entry will be the start of the
@@ -1562,7 +1560,7 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* After this, the PRP Entries are complete.
* This command uses 2 PRP's and no PRP list.
*/
- *prp2_entry = cpu_to_le64((u64)paddr);
+ *prp2_entry = cpu_to_le64(dma_addr);
}
} else {
/*
@@ -1572,16 +1570,16 @@ _base_build_nvme_prp(struct MPT3SAS_ADAPTER *ioc, u16 smid,
* all remaining PRP entries in a PRP List, one per
* each time through the loop.
*/
- *prp_entry = cpu_to_le64((u64)paddr);
+ *prp_entry = cpu_to_le64(dma_addr);
prp_entry++;
- prp_entry_phys++;
+ prp_entry_dma++;
}
/*
* Bump the phys address of the command's data buffer by the
* entry_len.
*/
- paddr += entry_len;
+ dma_addr += entry_len;
/* Decrement length accounting for last partial page. */
if (entry_len > length)
@@ -1610,11 +1608,10 @@ base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
Mpi25SCSIIORequest_t *mpi_request,
u16 smid, int sge_count)
{
- int sge_len, offset, num_prp_in_chain = 0;
+ int sge_len, num_prp_in_chain = 0;
Mpi25IeeeSgeChain64_t *main_chain_element, *ptr_first_sgl;
__le64 *curr_buff;
- dma_addr_t msg_phys;
- u64 sge_addr;
+ dma_addr_t msg_dma, sge_addr, offset;
u32 page_mask, page_mask_result;
struct scatterlist *sg_scmd;
u32 first_prp_len;
@@ -1661,9 +1658,9 @@ base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
* page (4k).
*/
curr_buff = mpt3sas_base_get_pcie_sgl(ioc, smid);
- msg_phys = (dma_addr_t)mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
+ msg_dma = mpt3sas_base_get_pcie_sgl_dma(ioc, smid);
- main_chain_element->Address = cpu_to_le64(msg_phys);
+ main_chain_element->Address = cpu_to_le64(msg_dma);
main_chain_element->NextChainOffset = 0;
main_chain_element->Flags = MPI2_IEEE_SGE_FLAGS_CHAIN_ELEMENT |
MPI2_IEEE_SGE_FLAGS_SYSTEM_ADDR |
@@ -1675,7 +1672,7 @@ base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
sge_addr = sg_dma_address(sg_scmd);
sge_len = sg_dma_len(sg_scmd);
- offset = (u32)(sge_addr & page_mask);
+ offset = sge_addr & page_mask;
first_prp_len = nvme_pg_size - offset;
ptr_first_sgl->Address = cpu_to_le64(sge_addr);
@@ -1693,7 +1690,7 @@ base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
}
for (;;) {
- offset = (u32)(sge_addr & page_mask);
+ offset = sge_addr & page_mask;
/* Put PRP pointer due to page boundary*/
page_mask_result = (uintptr_t)(curr_buff + 1) & page_mask;
@@ -1701,15 +1698,15 @@ base_make_prp_nvme(struct MPT3SAS_ADAPTER *ioc,
scmd_printk(KERN_NOTICE,
scmd, "page boundary curr_buff: 0x%p\n",
curr_buff);
- msg_phys += 8;
- *curr_buff = cpu_to_le64(msg_phys);
+ msg_dma += 8;
+ *curr_buff = cpu_to_le64(msg_dma);
curr_buff++;
num_prp_in_chain++;
}
*curr_buff = cpu_to_le64(sge_addr);
curr_buff++;
- msg_phys += 8;
+ msg_dma += 8;
num_prp_in_chain++;
sge_addr += nvme_pg_size;
@@ -2755,11 +2752,10 @@ mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid)
*
* Returns phys pointer to the address of the PCIe buffer.
*/
-void *
+dma_addr_t
mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid)
{
- return (void *)(uintptr_t)
- (ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl_dma);
+ return ioc->scsi_lookup[smid - 1].pcie_sg_list.pcie_sgl_dma;
}
/**
diff --git a/drivers/scsi/mpt3sas/mpt3sas_base.h b/drivers/scsi/mpt3sas/mpt3sas_base.h
index 2d7d44281cb7..60f42ca3954f 100644
--- a/drivers/scsi/mpt3sas/mpt3sas_base.h
+++ b/drivers/scsi/mpt3sas/mpt3sas_base.h
@@ -1395,7 +1395,7 @@ void *mpt3sas_base_get_sense_buffer(struct MPT3SAS_ADAPTER *ioc, u16 smid);
__le32 mpt3sas_base_get_sense_buffer_dma(struct MPT3SAS_ADAPTER *ioc,
u16 smid);
void *mpt3sas_base_get_pcie_sgl(struct MPT3SAS_ADAPTER *ioc, u16 smid);
-void *mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
+dma_addr_t mpt3sas_base_get_pcie_sgl_dma(struct MPT3SAS_ADAPTER *ioc, u16 smid);
void mpt3sas_base_sync_reply_irqs(struct MPT3SAS_ADAPTER *ioc);
/* hi-priority queue */
--
2.9.0
Powered by blists - more mailing lists