| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20171107043342.GA17606@intel.com>
Date: Mon, 6 Nov 2017 20:33:43 -0800
From: Ramesh Thomas <ramesh.thomas@...el.com>
To: "Rafael J. Wysocki" <rjw@...ysocki.net>
Cc: Linux PM <linux-pm@...r.kernel.org>,
LKML <linux-kernel@...r.kernel.org>,
Ulf Hansson <ulf.hansson@...aro.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>,
Tero Kristo <t-kristo@...com>,
Reinette Chatre <reinette.chatre@...el.com>,
Alex Shi <alex.shi@...aro.org>
Subject: Re: [PATCH v3 2/2] PM / QoS: Fix device resume latency framework
On 2017-11-07 at 02:27:05 +0100, Rafael J. Wysocki wrote:
> From: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
>
> The special value of 0 for device resume latency PM QoS means
> "no restriction", but there are two problems with that.
>
> First, device resume latency PM QoS requests with 0 as the
> value are always put in front of requests with positive
> values in the priority lists used internally by the PM QoS
> framework, causing 0 to be chosen as an effective constraint
> value. However, that 0 is then interpreted as "no restriction"
> effectively overriding the other requests with specific
> restrictions which is incorrect.
>
> Second, the users of device resume latency PM QoS have no
> way to specify that *any* resume latency at all should be
> avoided, which is an artificial limitation in general.
>
> To address these issues, modify device resume latency PM QoS to
> use S32_MAX as the "no constraint" value and 0 as the "no
> latency at all" one and rework its users (the cpuidle menu
> governor, the genpd QoS governor and the runtime PM framework)
> to follow these changes.
>
> Also add a special "n/a" value to the corresponding user space I/F
> to allow user space to indicate that it cannot accept any resume
> latencies at all for the given device.
>
> Fixes: 85dc0b8a4019 (PM / QoS: Make it possible to expose PM QoS latency constraints)
> Link: https://bugzilla.kernel.org/show_bug.cgi?id=197323
> Reported-by: Reinette Chatre <reinette.chatre@...el.com>
> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@...el.com>
> Tested-by: Reinette Chatre <reinette.chatre@...el.com>
> Tested-by: Geert Uytterhoeven <geert+renesas@...der.be>
> ---
> Documentation/ABI/testing/sysfs-devices-power | 4 ++-
> drivers/base/cpu.c | 3 +-
> drivers/base/power/domain.c | 2 -
> drivers/base/power/domain_governor.c | 33 ++++++++++----------------
> drivers/base/power/qos.c | 5 +++
> drivers/base/power/runtime.c | 2 -
> drivers/base/power/sysfs.c | 25 ++++++++++++++++---
> drivers/cpuidle/governors/menu.c | 4 +--
> include/linux/pm_qos.h | 26 ++++++++++++++------
> 9 files changed, 65 insertions(+), 39 deletions(-)
>
> Index: linux-pm/drivers/base/power/sysfs.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/sysfs.c
> +++ linux-pm/drivers/base/power/sysfs.c
> @@ -218,7 +218,14 @@ static ssize_t pm_qos_resume_latency_sho
> struct device_attribute *attr,
> char *buf)
> {
> - return sprintf(buf, "%d\n", dev_pm_qos_requested_resume_latency(dev));
> + s32 value = dev_pm_qos_requested_resume_latency(dev);
> +
> + if (value == 0)
> + return sprintf(buf, "n/a\n");
> + else if (value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
> + value = 0;
> +
> + return sprintf(buf, "%d\n", value);
> }
>
> static ssize_t pm_qos_resume_latency_store(struct device *dev,
> @@ -228,11 +235,21 @@ static ssize_t pm_qos_resume_latency_sto
> s32 value;
> int ret;
>
> - if (kstrtos32(buf, 0, &value))
> - return -EINVAL;
> + if (!kstrtos32(buf, 0, &value)) {
> + /*
> + * Prevent users from writing negative or "no constraint" values
> + * directly.
> + */
> + if (value < 0 || value == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
> + return -EINVAL;
>
> - if (value < 0)
> + if (value == 0)
> + value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
> + } else if (!strcmp(buf, "n/a") || !strcmp(buf, "n/a\n")) {
> + value = 0;
> + } else {
> return -EINVAL;
> + }
>
> ret = dev_pm_qos_update_request(dev->power.qos->resume_latency_req,
> value);
> Index: linux-pm/include/linux/pm_qos.h
> ===================================================================
> --- linux-pm.orig/include/linux/pm_qos.h
> +++ linux-pm/include/linux/pm_qos.h
> @@ -28,16 +28,19 @@ enum pm_qos_flags_status {
> PM_QOS_FLAGS_ALL,
> };
>
> -#define PM_QOS_DEFAULT_VALUE -1
> +#define PM_QOS_DEFAULT_VALUE (-1)
> +#define PM_QOS_LATENCY_ANY S32_MAX
> +#define PM_QOS_LATENCY_ANY_NS ((s64)PM_QOS_LATENCY_ANY * NSEC_PER_USEC)
>
> #define PM_QOS_CPU_DMA_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
> #define PM_QOS_NETWORK_LAT_DEFAULT_VALUE (2000 * USEC_PER_SEC)
> #define PM_QOS_NETWORK_THROUGHPUT_DEFAULT_VALUE 0
> #define PM_QOS_MEMORY_BANDWIDTH_DEFAULT_VALUE 0
> -#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE 0
> +#define PM_QOS_RESUME_LATENCY_DEFAULT_VALUE PM_QOS_LATENCY_ANY
> +#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT PM_QOS_LATENCY_ANY
> +#define PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS PM_QOS_LATENCY_ANY_NS
> #define PM_QOS_LATENCY_TOLERANCE_DEFAULT_VALUE 0
> #define PM_QOS_LATENCY_TOLERANCE_NO_CONSTRAINT (-1)
> -#define PM_QOS_LATENCY_ANY ((s32)(~(__u32)0 >> 1))
>
> #define PM_QOS_FLAG_NO_POWER_OFF (1 << 0)
>
> @@ -174,7 +177,8 @@ static inline s32 dev_pm_qos_requested_f
> static inline s32 dev_pm_qos_raw_read_value(struct device *dev)
> {
> return IS_ERR_OR_NULL(dev->power.qos) ?
> - 0 : pm_qos_read_value(&dev->power.qos->resume_latency);
> + PM_QOS_RESUME_LATENCY_NO_CONSTRAINT :
> + pm_qos_read_value(&dev->power.qos->resume_latency);
> }
> #else
> static inline enum pm_qos_flags_status __dev_pm_qos_flags(struct device *dev,
> @@ -184,9 +188,9 @@ static inline enum pm_qos_flags_status d
> s32 mask)
> { return PM_QOS_FLAGS_UNDEFINED; }
> static inline s32 __dev_pm_qos_read_value(struct device *dev)
> - { return 0; }
> + { return PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; }
> static inline s32 dev_pm_qos_read_value(struct device *dev)
> - { return 0; }
> + { return PM_QOS_RESUME_LATENCY_NO_CONSTRAINT; }
> static inline int dev_pm_qos_add_request(struct device *dev,
> struct dev_pm_qos_request *req,
> enum dev_pm_qos_req_type type,
> @@ -232,9 +236,15 @@ static inline int dev_pm_qos_expose_late
> { return 0; }
> static inline void dev_pm_qos_hide_latency_tolerance(struct device *dev) {}
>
> -static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev) { return 0; }
> +static inline s32 dev_pm_qos_requested_resume_latency(struct device *dev)
> +{
> + return PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
> +}
> static inline s32 dev_pm_qos_requested_flags(struct device *dev) { return 0; }
> -static inline s32 dev_pm_qos_raw_read_value(struct device *dev) { return 0; }
> +static inline s32 dev_pm_qos_raw_read_value(struct device *dev)
> +{
> + return PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
> +}
> #endif
>
> #endif
> Index: linux-pm/drivers/cpuidle/governors/menu.c
> ===================================================================
> --- linux-pm.orig/drivers/cpuidle/governors/menu.c
> +++ linux-pm/drivers/cpuidle/governors/menu.c
> @@ -298,8 +298,8 @@ static int menu_select(struct cpuidle_dr
> data->needs_update = 0;
> }
>
> - /* resume_latency is 0 means no restriction */
> - if (resume_latency && resume_latency < latency_req)
> + if (resume_latency < latency_req &&
> + resume_latency != PM_QOS_RESUME_LATENCY_NO_CONSTRAINT)
> latency_req = resume_latency;
>
> /* Special case when user has set very strict latency requirement */
> Index: linux-pm/drivers/base/power/runtime.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/runtime.c
> +++ linux-pm/drivers/base/power/runtime.c
> @@ -253,7 +253,7 @@ static int rpm_check_suspend_allowed(str
> || (dev->power.request_pending
> && dev->power.request == RPM_REQ_RESUME))
> retval = -EAGAIN;
> - else if (__dev_pm_qos_read_value(dev) < 0)
> + else if (__dev_pm_qos_read_value(dev) == 0)
> retval = -EPERM;
> else if (dev->power.runtime_status == RPM_SUSPENDED)
> retval = 1;
> Index: linux-pm/drivers/base/cpu.c
> ===================================================================
> --- linux-pm.orig/drivers/base/cpu.c
> +++ linux-pm/drivers/base/cpu.c
> @@ -377,7 +377,8 @@ int register_cpu(struct cpu *cpu, int nu
>
> per_cpu(cpu_sys_devices, num) = &cpu->dev;
> register_cpu_under_node(num, cpu_to_node(num));
> - dev_pm_qos_expose_latency_limit(&cpu->dev, 0);
> + dev_pm_qos_expose_latency_limit(&cpu->dev,
> + PM_QOS_RESUME_LATENCY_NO_CONSTRAINT);
>
> return 0;
> }
> Index: linux-pm/drivers/base/power/qos.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/qos.c
> +++ linux-pm/drivers/base/power/qos.c
> @@ -139,6 +139,9 @@ static int apply_constraint(struct dev_p
>
> switch(req->type) {
> case DEV_PM_QOS_RESUME_LATENCY:
> + if (WARN_ON(action != PM_QOS_REMOVE_REQ && value < 0))
> + value = 0;
> +
> ret = pm_qos_update_target(&qos->resume_latency,
> &req->data.pnode, action, value);
> break;
> @@ -189,7 +192,7 @@ static int dev_pm_qos_constraints_alloca
> plist_head_init(&c->list);
> c->target_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
> c->default_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
> - c->no_constraint_value = PM_QOS_RESUME_LATENCY_DEFAULT_VALUE;
> + c->no_constraint_value = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT;
> c->type = PM_QOS_MIN;
> c->notifiers = n;
>
> Index: linux-pm/Documentation/ABI/testing/sysfs-devices-power
> ===================================================================
> --- linux-pm.orig/Documentation/ABI/testing/sysfs-devices-power
> +++ linux-pm/Documentation/ABI/testing/sysfs-devices-power
> @@ -211,7 +211,9 @@ Description:
> device, after it has been suspended at run time, from a resume
> request to the moment the device will be ready to process I/O,
> in microseconds. If it is equal to 0, however, this means that
> - the PM QoS resume latency may be arbitrary.
> + the PM QoS resume latency may be arbitrary and the special value
> + "n/a" means that user space cannot accept any resume latency at
> + all for the given device.
>
> Not all drivers support this attribute. If it isn't supported,
> it is not present.
> Index: linux-pm/drivers/base/power/domain.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/domain.c
> +++ linux-pm/drivers/base/power/domain.c
> @@ -1331,7 +1331,7 @@ static struct generic_pm_domain_data *ge
>
> gpd_data->base.dev = dev;
> gpd_data->td.constraint_changed = true;
> - gpd_data->td.effective_constraint_ns = 0;
> + gpd_data->td.effective_constraint_ns = PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS;
> gpd_data->nb.notifier_call = genpd_dev_pm_qos_notifier;
>
> spin_lock_irq(&dev->power.lock);
> Index: linux-pm/drivers/base/power/domain_governor.c
> ===================================================================
> --- linux-pm.orig/drivers/base/power/domain_governor.c
> +++ linux-pm/drivers/base/power/domain_governor.c
> @@ -33,15 +33,10 @@ static int dev_update_qos_constraint(str
> * known at this point anyway).
> */
> constraint_ns = dev_pm_qos_read_value(dev);
> - if (constraint_ns > 0)
> - constraint_ns *= NSEC_PER_USEC;
> + constraint_ns *= NSEC_PER_USEC;
> }
>
> - /* 0 means "no constraint" */
> - if (constraint_ns == 0)
> - return 0;
> -
> - if (constraint_ns < *constraint_ns_p || *constraint_ns_p == 0)
> + if (constraint_ns < *constraint_ns_p)
> *constraint_ns_p = constraint_ns;
>
> return 0;
> @@ -69,12 +64,12 @@ static bool default_suspend_ok(struct de
> }
> td->constraint_changed = false;
> td->cached_suspend_ok = false;
> - td->effective_constraint_ns = -1;
> + td->effective_constraint_ns = 0;
> constraint_ns = __dev_pm_qos_read_value(dev);
>
> spin_unlock_irqrestore(&dev->power.lock, flags);
>
> - if (constraint_ns < 0)
> + if (constraint_ns == 0)
> return false;
>
> constraint_ns *= NSEC_PER_USEC;
> @@ -87,25 +82,25 @@ static bool default_suspend_ok(struct de
> device_for_each_child(dev, &constraint_ns,
> dev_update_qos_constraint);
>
> - if (constraint_ns == 0) {
> + if (constraint_ns == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS) {
> /* "No restriction", so the device is allowed to suspend. */
> td->effective_constraint_ns = 0;
I think you forgot to change this. Assigning 0 would cause its parent to
fail suspend thinking this child has "no suspend at all" restriction. Should
assign PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS.
Should a macro be created for "no suspend at all" so it will be more clear?
> td->cached_suspend_ok = true;
> - } else if (constraint_ns < 0) {
> + } else if (constraint_ns == 0) {
> /*
> * This triggers if one of the children that don't belong to a
> - * domain has a negative PM QoS constraint and it's better not
> - * to suspend then. effective_constraint_ns is negative already
> - * and cached_suspend_ok is false, so bail out.
> + * domain has a zero PM QoS constraint and it's better not to
> + * suspend then. effective_constraint_ns is zero already and
> + * cached_suspend_ok is false, so bail out.
> */
> return false;
> } else {
> constraint_ns -= td->suspend_latency_ns +
> td->resume_latency_ns;
> /*
> - * effective_constraint_ns is negative already and
> - * cached_suspend_ok is false, so if the computed value is not
> - * positive, return right away.
> + * effective_constraint_ns is zero already and cached_suspend_ok
> + * is false, so if the computed value is not positive, return
> + * right away.
> */
> if (constraint_ns <= 0)
> return false;
> @@ -177,10 +172,8 @@ static bool __default_power_down_ok(stru
> * Negative values mean "no suspend at all" and this runs only
> * when all devices in the domain are suspended, so it must be
> * 0 at least.
I think this message is carried from the previous patch and may need to be
revised.
In this change, negative value does not mean "no suspend at all". It also
cannot be 0 or else it would not have suspended. It will alway be > 0 if it
reaches here.
> - *
> - * 0 means "no constraint"
> */
> - if (constraint_ns == 0)
> + if (constraint_ns == PM_QOS_RESUME_LATENCY_NO_CONSTRAINT_NS)
> continue;
>
> if (constraint_ns <= off_on_time_ns)
>
Regards,
Ramesh
Powered by blists - more mailing lists