early console in setup code Probing EDD (edd=off to disable)... ok early console in extract_kernel input_data: 0x000000000511b276 input_len: 0x00000000010c8ea8 output: 0x0000000001000000 output_len: 0x0000000003006878 kernel_total_size: 0x0000000005204000 Decompressing Linux... Parsing ELF... done. Booting the kernel. [ 0.000000] Linux version 4.14.0-rc8 (kbuild@lkp-wsm-ep2) (gcc version 4.8.4 (Debian 4.8.4-1)) #1 SMP Mon Nov 6 18:52:36 CST 2017 [ 0.000000] Command line: ip=::::vm-vp-quantal-x86_64-33::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-10312215 branch=linus/master commit=39dae59d66acd86d1de24294bd2f343fd5e7a625 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/vmlinuz-4.14.0-rc8 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/1 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw drbd.minor_count=8 [ 0.000000] x86/fpu: x87 FPU will use FXSAVE [ 0.000000] e820: BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable [ 0.000000] BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001ffdffff] usable [ 0.000000] BIOS-e820: [mem 0x000000001ffe0000-0x000000001fffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000feffc000-0x00000000feffffff] reserved [ 0.000000] BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved [ 0.000000] debug: ignoring loglevel setting. [ 0.000000] bootconsole [earlyser0] enabled [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] random: fast init done [ 0.000000] SMBIOS 2.8 present. [ 0.000000] DMI: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 0.000000] Hypervisor detected: KVM [ 0.000000] tsc: Fast TSC calibration using PIT [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable [ 0.000000] e820: last_pfn = 0x1ffe0 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: write-back [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 0080000000 mask FF80000000 uncachable [ 0.000000] 1 disabled [ 0.000000] 2 disabled [ 0.000000] 3 disabled [ 0.000000] 4 disabled [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] x86/PAT: PAT not supported by CPU. [ 0.000000] x86/PAT: Configuration [0-7]: WB WT UC- UC WB WT UC- UC [ 0.000000] Scanning 1 areas for low memory corruption [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576 [ 0.000000] BRK [0x061df000, 0x061dffff] PGTABLE [ 0.000000] BRK [0x061e0000, 0x061e0fff] PGTABLE [ 0.000000] BRK [0x061e1000, 0x061e1fff] PGTABLE [ 0.000000] BRK [0x061e2000, 0x061e2fff] PGTABLE [ 0.000000] RAMDISK: [mem 0x1e7aa000-0x1ffdffff] [ 0.000000] ACPI: Early table checksum verification disabled [ 0.000000] ACPI: RSDP 0x00000000000F6870 000014 (v00 BOCHS ) [ 0.000000] ACPI: RSDT 0x000000001FFE1628 000030 (v01 BOCHS BXPCRSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACP 0x000000001FFE147C 000074 (v01 BOCHS BXPCFACP 00000001 BXPC 00000001) [ 0.000000] ACPI: DSDT 0x000000001FFE0040 00143C (v01 BOCHS BXPCDSDT 00000001 BXPC 00000001) [ 0.000000] ACPI: FACS 0x000000001FFE0000 000040 [ 0.000000] ACPI: APIC 0x000000001FFE1570 000080 (v01 BOCHS BXPCAPIC 00000001 BXPC 00000001) [ 0.000000] ACPI: HPET 0x000000001FFE15F0 000038 (v01 BOCHS BXPCHPET 00000001 BXPC 00000001) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] mapped APIC to ffffffffff5fd000 ( fee00000) [ 0.000000] kvm-clock: Using msrs 4b564d01 and 4b564d00 [ 0.000000] kvm-clock: cpu 0, msr 0:1e72a001, primary cpu clock [ 0.000000] kvm-clock: using sched offset of 375470210 cycles [ 0.000000] clocksource: kvm-clock: mask: 0xffffffffffffffff max_cycles: 0x1cd42e4dffb, max_idle_ns: 881590591483 ns [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff] [ 0.000000] DMA32 [mem 0x0000000001000000-0x000000001ffdffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009efff] [ 0.000000] node 0: [mem 0x0000000000100000-0x000000001ffdffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000001ffdffff] [ 0.000000] On node 0 totalpages: 130942 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 21 pages reserved [ 0.000000] DMA zone: 3998 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 1984 pages used for memmap [ 0.000000] DMA32 zone: 126944 pages, LIFO batch:31 [ 0.000000] kasan: KernelAddressSanitizer initialized [ 0.000000] ACPI: PM-Timer IO Port: 0x608 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) [ 0.000000] IOAPIC[0]: apic_id 0, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 00, APIC ID 0, APIC INT 02 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 05, APIC ID 0, APIC INT 05 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 09, APIC ID 0, APIC INT 09 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0a, APIC ID 0, APIC INT 0a [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 high level) [ 0.000000] Int: type 0, pol 1, trig 3, bus 00, IRQ 0b, APIC ID 0, APIC INT 0b [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 01, APIC ID 0, APIC INT 01 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 03, APIC ID 0, APIC INT 03 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 04, APIC ID 0, APIC INT 04 [ 0.000000] ACPI: IRQ5 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 06, APIC ID 0, APIC INT 06 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 07, APIC ID 0, APIC INT 07 [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 08, APIC ID 0, APIC INT 08 [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ10 used by override. [ 0.000000] ACPI: IRQ11 used by override. [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0c, APIC ID 0, APIC INT 0c [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0d, APIC ID 0, APIC INT 0d [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0e, APIC ID 0, APIC INT 0e [ 0.000000] Int: type 0, pol 0, trig 0, bus 00, IRQ 0f, APIC ID 0, APIC INT 0f [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] mapped IOAPIC to ffffffffff5fc000 (fec00000) [ 0.000000] e820: [mem 0x20000000-0xfeffbfff] available for PCI devices [ 0.000000] Booting paravirtualized kernel on KVM [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns [ 0.000000] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:2 nr_cpu_ids:2 nr_node_ids:1 [ 0.000000] percpu: Embedded 492 pages/cpu @ffff880018a00000 s1984920 r0 d30312 u2097152 [ 0.000000] pcpu-alloc: s1984920 r0 d30312 u2097152 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [ 0.000000] KVM setup async PF for cpu 0 [ 0.000000] kvm-stealtime: cpu 0, msr 18a15a00 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 128873 [ 0.000000] Kernel command line: ip=::::vm-vp-quantal-x86_64-33::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-10312215 branch=linus/master commit=39dae59d66acd86d1de24294bd2f343fd5e7a625 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/vmlinuz-4.14.0-rc8 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/1 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw drbd.minor_count [ 0.000000] sysrq: sysrq always enabled. [ 0.000000] PID hash table entries: 2048 (order: 2, 16384 bytes) [ 0.000000] Dentry cache hash table entries: 65536 (order: 7, 524288 bytes) [ 0.000000] Inode-cache hash table entries: 32768 (order: 6, 262144 bytes) [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.000000] Memory: 323732K/523768K available (26446K kernel code, 4602K rwdata, 8292K rodata, 3348K init, 38752K bss, 200036K reserved, 0K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.003333] Running RCU self tests [ 0.003333] Hierarchical RCU implementation. [ 0.003333] RCU lockdep checking is enabled. [ 0.003333] RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=2. [ 0.003333] RCU debug extended QS entry/exit. [ 0.003333] RCU CPU stall warnings timeout set to 100 (rcu_cpu_stall_timeout). [ 0.003333] Tasks RCU enabled. [ 0.003333] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 [ 0.003333] NR_IRQS: 524544, nr_irqs: 440, preallocated irqs: 16 [ 0.003333] Offload RCU callbacks from CPUs: . [ 0.003333] Console: colour VGA+ 80x25 [ 0.003333] console [tty0] enabled [ 0.003333] console [ttyS0] enabled [ 0.003333] bootconsole [earlyser0] disabled [ 0.003333] Lock dependency validator: Copyright (c) 2006 Red Hat, Inc., Ingo Molnar [ 0.003333] ... MAX_LOCKDEP_SUBCLASSES: 8 [ 0.003333] ... MAX_LOCK_DEPTH: 48 [ 0.003333] ... MAX_LOCKDEP_KEYS: 8191 [ 0.003333] ... CLASSHASH_SIZE: 4096 [ 0.003333] ... MAX_LOCKDEP_ENTRIES: 32768 [ 0.003333] ... MAX_LOCKDEP_CHAINS: 65536 [ 0.003333] ... CHAINHASH_SIZE: 32768 [ 0.003333] memory used by lock dependency info: 7903 kB [ 0.003333] per task-struct memory footprint: 2688 bytes [ 0.003333] ------------------------ [ 0.003333] | Locking API testsuite: [ 0.003333] ---------------------------------------------------------------------------- [ 0.003333] | spin |wlock |rlock |mutex | wsem | rsem | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] A-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-A-B-C deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-B-C-C-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-D-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] A-B-C-D-B-C-D-A deadlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] double unlock: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] initialize held: ok | ok | ok | ok | ok | ok | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] recursive read-lock: | ok | | ok | [ 0.003333] recursive read-lock #2: | ok | | ok | [ 0.003333] mixed read-write-lock: | ok | | ok | [ 0.003333] mixed write-read-lock: | ok | | ok | [ 0.003333] mixed read-lock/lock-write ABBA: |FAILED| | ok | [ 0.003333] mixed read-lock/lock-read ABBA: | ok | | ok | [ 0.003333] mixed write-lock/lock-write ABBA: | ok | | ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] hard-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/12: ok | ok | ok | [ 0.003333] hard-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] soft-irqs-on + irq-safe-A/21: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/12: ok | ok | ok | [ 0.003333] sirq-safe-A => hirqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/12: ok | ok | ok | [ 0.003333] hard-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] soft-safe-A + irqs-on/21: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #1/321: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/123: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/132: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/213: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/231: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/312: ok | ok | ok | [ 0.003333] hard-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] soft-safe-A + unsafe-B #2/321: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/123: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/123: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/132: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/132: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/213: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/213: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/231: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/231: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/312: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/312: ok | ok | ok | [ 0.003333] hard-irq lock-inversion/321: ok | ok | ok | [ 0.003333] soft-irq lock-inversion/321: ok | ok | ok | [ 0.003333] hard-irq read-recursion/123: ok | [ 0.003333] soft-irq read-recursion/123: ok | [ 0.003333] hard-irq read-recursion/132: ok | [ 0.003333] soft-irq read-recursion/132: ok | [ 0.003333] hard-irq read-recursion/213: ok | [ 0.003333] soft-irq read-recursion/213: ok | [ 0.003333] hard-irq read-recursion/231: ok | [ 0.003333] soft-irq read-recursion/231: ok | [ 0.003333] hard-irq read-recursion/312: ok | [ 0.003333] soft-irq read-recursion/312: ok | [ 0.003333] hard-irq read-recursion/321: ok | [ 0.003333] soft-irq read-recursion/321: ok | [ 0.003333] -------------------------------------------------------------------------- [ 0.003333] | Wound/wait tests | [ 0.003333] --------------------- [ 0.003333] ww api failures: ok | ok | ok | [ 0.003333] ww contexts mixing: ok | ok | [ 0.003333] finishing ww context: ok | ok | ok | ok | [ 0.003333] locking mismatches: ok | ok | ok | [ 0.003333] EDEADLK handling: ok | ok | ok | ok | ok | ok | ok | ok | ok | ok | [ 0.003333] spinlock nest unlocked: ok | [ 0.003333] ----------------------------------------------------- [ 0.003333] |block | try |context| [ 0.003333] ----------------------------------------------------- [ 0.003333] context: ok | ok | ok | [ 0.003333] try: ok | ok | ok | [ 0.003333] block: ok | ok | ok | [ 0.003333] spinlock: ok | ok | ok | [ 0.003333] ------------------------------------------------------- [ 0.003333] Good, all 261 testcases passed! | [ 0.003333] --------------------------------- [ 0.003333] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604467 ns [ 0.003333] hpet clockevent registered [ 0.003358] tsc: Detected 2693.508 MHz processor [ 0.004433] Calibrating delay loop (skipped) preset value.. 5389.47 BogoMIPS (lpj=8978360) [ 0.006682] pid_max: default: 32768 minimum: 301 [ 0.008012] ACPI: Core revision 20170728 [ 0.030400] ACPI: 1 ACPI AML tables successfully acquired and loaded [ 0.032473] Mount-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.033351] Mountpoint-cache hash table entries: 1024 (order: 1, 8192 bytes) [ 0.037258] CPU: Physical Processor ID: 0 [ 0.038428] mce: CPU supports 10 MCE banks [ 0.039679] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0 [ 0.040014] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0 [ 0.043381] Freeing SMP alternatives memory: 64K [ 0.046285] smpboot: Max logical packages: 2 [ 0.046772] enabled ExtINT on CPU#0 [ 0.048910] ENABLING IO-APIC IRQs [ 0.050051] init IO_APIC IRQs [ 0.050964] apic 0 pin 0 not connected [ 0.052135] IOAPIC[0]: Set routing entry (0-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) [ 0.053395] IOAPIC[0]: Set routing entry (0-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) [ 0.055594] IOAPIC[0]: Set routing entry (0-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-4 -> 0x34 -> IRQ 4 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-5 -> 0x35 -> IRQ 5 Mode:1 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-6 -> 0x36 -> IRQ 6 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-7 -> 0x37 -> IRQ 7 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-8 -> 0x38 -> IRQ 8 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-9 -> 0x39 -> IRQ 9 Mode:1 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-10 -> 0x3a -> IRQ 10 Mode:1 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-11 -> 0x3b -> IRQ 11 Mode:1 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-12 -> 0x3c -> IRQ 12 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-13 -> 0x3d -> IRQ 13 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-14 -> 0x3e -> IRQ 14 Mode:0 Active:0 Dest:1) [ 0.056666] IOAPIC[0]: Set routing entry (0-15 -> 0x3f -> IRQ 15 Mode:0 Active:0 Dest:1) [ 0.056666] apic 0 pin 16 not connected [ 0.056666] apic 0 pin 17 not connected [ 0.056666] apic 0 pin 18 not connected [ 0.056666] apic 0 pin 19 not connected [ 0.056666] apic 0 pin 20 not connected [ 0.056666] apic 0 pin 21 not connected [ 0.056666] apic 0 pin 22 not connected [ 0.056666] apic 0 pin 23 not connected [ 0.056666] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056666] Using local APIC timer interrupts. [ 0.056666] calibrating APIC timer ... [ 0.059999] ... lapic delta = 6249075 [ 0.059999] ... PM-Timer delta = 357891 [ 0.059999] ... PM-Timer result ok [ 0.059999] ..... delta 6249075 [ 0.059999] ..... mult: 268395754 [ 0.059999] ..... calibration result: 3332840 [ 0.059999] ..... CPU clock speed is 2693.0975 MHz. [ 0.059999] ..... host bus clock speed is 999.3173 MHz. [ 0.060073] smpboot: CPU0: Intel QEMU Virtual CPU version 2.5+ (family: 0x6, model: 0x6, stepping: 0x3) [ 0.062846] Performance Events: PMU not available due to virtualization, using software events only. [ 0.070073] Hierarchical SRCU implementation. [ 0.071935] smp: Bringing up secondary CPUs ... [ 0.074272] x86: Booting SMP configuration: [ 0.075631] .... node #0, CPUs: #1 [ 0.003333] kvm-clock: cpu 1, msr 0:1e72a041, secondary cpu clock [ 0.003333] masked ExtINT on CPU#1 [ 0.080144] KVM setup async PF for cpu 1 [ 0.081268] kvm-stealtime: cpu 1, msr 18c15a00 [ 0.085220] smp: Brought up 1 node, 2 CPUs [ 0.088493] smpboot: Total of 2 processors activated (10778.95 BogoMIPS) [ 0.097237] devtmpfs: initialized [ 0.103967] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns [ 0.104859] futex hash table entries: 512 (order: 4, 65536 bytes) [ 0.106775] xor: measuring software checksum speed [ 0.140015] prefetch64-sse: 18894.000 MB/sec [ 0.170673] generic_sse: 16956.000 MB/sec [ 0.171368] xor: using function: prefetch64-sse (18894.000 MB/sec) [ 0.172226] prandom: seed boundary self test passed [ 0.173790] prandom: 100 self tests passed [ 0.175321] NET: Registered protocol family 16 [ 0.181589] cpuidle: using governor menu [ 0.183341] ACPI: bus type PCI registered [ 0.183341] PCI: Using configuration type 1 for base access [ 0.233988] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages [ 0.287328] raid6: sse2x1 gen() 4391 MB/s [ 0.344005] raid6: sse2x1 xor() 2077 MB/s [ 0.400669] raid6: sse2x2 gen() 6904 MB/s [ 0.457328] raid6: sse2x2 xor() 3804 MB/s [ 0.514052] raid6: sse2x4 gen() 9072 MB/s [ 0.570684] raid6: sse2x4 xor() 5701 MB/s [ 0.571298] raid6: using algorithm sse2x4 gen() 9072 MB/s [ 0.572035] raid6: .... xor() 5701 MB/s, rmw enabled [ 0.572711] raid6: using intx1 recovery algorithm [ 0.576671] ACPI: Added _OSI(Module Device) [ 0.576708] ACPI: Added _OSI(Processor Device) [ 0.576708] ACPI: Added _OSI(3.0 _SCP Extensions) [ 0.576708] ACPI: Added _OSI(Processor Aggregator Device) [ 0.588616] ACPI: Interpreter enabled [ 0.589217] ACPI: (supports S0 S5) [ 0.589732] ACPI: Using IOAPIC for interrupt routing [ 0.590087] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 0.592391] ACPI: Enabled 2 GPEs in block 00 to 0F [ 0.627437] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff]) [ 0.628305] acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI] [ 0.629274] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM [ 0.632997] PCI host bridge to bus 0000:00 [ 0.633346] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window] [ 0.634258] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window] [ 0.635153] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window] [ 0.636166] pci_bus 0000:00: root bus resource [mem 0x20000000-0xfebfffff window] [ 0.640012] pci_bus 0000:00: root bus resource [bus 00-ff] [ 0.640827] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000 [ 0.642403] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100 [ 0.642838] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180 [ 0.646676] pci 0000:00:01.1: reg 0x20: [io 0xc040-0xc04f] [ 0.648676] pci 0000:00:01.1: legacy IDE quirk: reg 0x10: [io 0x01f0-0x01f7] [ 0.649610] pci 0000:00:01.1: legacy IDE quirk: reg 0x14: [io 0x03f6] [ 0.650009] pci 0000:00:01.1: legacy IDE quirk: reg 0x18: [io 0x0170-0x0177] [ 0.650952] pci 0000:00:01.1: legacy IDE quirk: reg 0x1c: [io 0x0376] [ 0.653373] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000 [ 0.654988] pci 0000:00:01.3: quirk: [io 0x0600-0x063f] claimed by PIIX4 ACPI [ 0.655975] pci 0000:00:01.3: quirk: [io 0x0700-0x070f] claimed by PIIX4 SMB [ 0.657814] pci 0000:00:02.0: [1234:1111] type 00 class 0x030000 [ 0.660014] pci 0000:00:02.0: reg 0x10: [mem 0xfd000000-0xfdffffff pref] [ 0.663348] pci 0000:00:02.0: reg 0x18: [mem 0xfebf0000-0xfebf0fff] [ 0.669143] pci 0000:00:02.0: reg 0x30: [mem 0xfebe0000-0xfebeffff pref] [ 0.671236] pci 0000:00:03.0: [8086:100e] type 00 class 0x020000 [ 0.673343] pci 0000:00:03.0: reg 0x10: [mem 0xfebc0000-0xfebdffff] [ 0.675231] pci 0000:00:03.0: reg 0x14: [io 0xc000-0xc03f] [ 0.680577] pci 0000:00:03.0: reg 0x30: [mem 0xfeb80000-0xfebbffff pref] [ 0.682664] pci 0000:00:04.0: [8086:25ab] type 00 class 0x088000 [ 0.683958] pci 0000:00:04.0: reg 0x10: [mem 0xfebf1000-0xfebf100f] [ 0.689154] pci_bus 0000:00: on NUMA node 0 [ 0.693446] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 *10 11) [ 0.695229] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11) [ 0.697120] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11) [ 0.698666] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 10 *11) [ 0.699809] ACPI: PCI Interrupt Link [LNKS] (IRQs *9) [ 0.704433] pci 0000:00:02.0: vgaarb: setting as boot VGA device [ 0.704433] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none [ 0.706676] pci 0000:00:02.0: vgaarb: bridge control possible [ 0.707515] vgaarb: loaded [ 0.708426] SCSI subsystem initialized [ 0.708426] ACPI: bus type USB registered [ 0.708745] usbcore: registered new interface driver usbfs [ 0.709542] usbcore: registered new interface driver hub [ 0.713004] usbcore: registered new device driver usb [ 0.713337] pps_core: LinuxPPS API ver. 1 registered [ 0.713337] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.713365] PTP clock support registered [ 0.714342] Advanced Linux Sound Architecture Driver Initialized. [ 0.715294] PCI: Using ACPI for IRQ routing [ 0.716044] PCI: pci_cache_line_size set to 64 bytes [ 0.716787] e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff] [ 0.717662] e820: reserve RAM buffer [mem 0x1ffe0000-0x1fffffff] [ 0.719486] Bluetooth: Core ver 2.22 [ 0.720043] NET: Registered protocol family 31 [ 0.720679] Bluetooth: HCI device and connection manager initialized [ 0.721523] Bluetooth: HCI socket layer initialized [ 0.722205] Bluetooth: L2CAP socket layer initialized [ 0.722943] NET: Registered protocol family 8 [ 0.723339] NET: Registered protocol family 20 [ 0.728087] HPET: 3 timers in total, 0 timers will be used for per-cpu timer [ 0.730117] clocksource: Switched to clocksource kvm-clock [ 0.731035] VFS: Disk quotas dquot_6.6.0 [ 0.731658] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.732722] FS-Cache: Loaded [ 0.733426] CacheFiles: Loaded [ 0.733962] pnp: PnP ACPI init [ 0.734768] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active) [ 0.735880] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active) [ 0.737006] pnp 00:02: Plug and Play ACPI device, IDs PNP0f13 (active) [ 0.737947] pnp 00:03: [dma 2] [ 0.738498] pnp 00:03: Plug and Play ACPI device, IDs PNP0700 (active) [ 0.739699] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active) [ 0.740971] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.742155] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active) [ 0.744749] pnp: PnP ACPI: found 7 devices [ 0.757776] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns [ 0.759214] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window] [ 0.760467] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window] [ 0.761319] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window] [ 0.762271] pci_bus 0000:00: resource 7 [mem 0x20000000-0xfebfffff window] [ 0.763822] NET: Registered protocol family 2 [ 0.765477] TCP established hash table entries: 4096 (order: 3, 32768 bytes) [ 0.766488] TCP bind hash table entries: 4096 (order: 6, 327680 bytes) [ 0.767593] TCP: Hash tables configured (established 4096 bind 4096) [ 0.768556] UDP hash table entries: 256 (order: 3, 49152 bytes) [ 0.769421] UDP-Lite hash table entries: 256 (order: 3, 49152 bytes) [ 0.770590] NET: Registered protocol family 1 [ 0.771269] pci 0000:00:00.0: Limiting direct PCI/PCI transfers [ 0.772115] pci 0000:00:01.0: PIIX3: Enabling Passive Release [ 0.772936] pci 0000:00:01.0: Activating ISA DMA hang workarounds [ 0.773860] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff] [ 0.775043] PCI: CLS 0 bytes, default 64 [ 0.775932] Unpacking initramfs... [ 2.382714] Freeing initrd memory: 24792K [ 2.396698] Scanning for low memory corruption every 60 seconds [ 2.398986] cryptomgr_test (31) used greatest stack depth: 31312 bytes left [ 2.402256] PCLMULQDQ-NI instructions are not detected. [ 2.403130] AVX or AES-NI instructions are not detected. [ 2.403948] CPU feature 'AVX registers' is not supported. [ 2.404708] CPU feature 'AVX registers' is not supported. [ 2.405488] AVX2 or AES-NI instructions are not detected. [ 2.406257] AVX2 instructions are not detected. [ 2.407124] spin_lock-torture:--- Start of test [debug]: nwriters_stress=4 nreaders_stress=0 stat_interval=60 verbose=1 shuffle_interval=3 stutter=5 shutdown_secs=0 onoff_interval=0 onoff_holdoff=0 [ 2.409539] spin_lock-torture: Creating torture_shuffle task [ 2.410475] spin_lock-torture: Creating torture_stutter task [ 2.411345] spin_lock-torture: torture_shuffle task started [ 2.412197] spin_lock-torture: Creating lock_torture_writer task [ 2.412232] spin_lock-torture: torture_stutter task started [ 2.413982] spin_lock-torture: Creating lock_torture_writer task [ 2.414893] spin_lock-torture: lock_torture_writer task started [ 2.415787] spin_lock-torture: Creating lock_torture_writer task [ 2.415877] spin_lock-torture: lock_torture_writer task started [ 2.416788] spin_lock-torture: Creating lock_torture_writer task [ 2.417330] spin_lock-torture: lock_torture_writer task started [ 2.417786] spin_lock-torture: Creating lock_torture_stats task [ 2.417806] spin_lock-torture: lock_torture_writer task started [ 2.418842] spin_lock-torture: lock_torture_stats task started [ 3.410146] tsc: Refined TSC clocksource calibration: 2693.509 MHz [ 3.411057] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x26d34aa491a, max_idle_ns: 440795256568 ns [ 8.964049] torture_init_begin: Refusing rcu init: spin_lock running. [ 8.967084] torture_init_begin: One torture test at a time! [ 8.971487] workingset: timestamp_bits=62 max_order=17 bucket_order=0 [ 8.987228] zbud: loaded [ 8.991764] DLM installed [ 8.994607] ntfs: driver 2.1.32 [Flags: R/W DEBUG]. [ 8.999058] fuse init (API version 7.26) [ 9.000798] JFS: nTxBlock = 2723, nTxLock = 21786 [ 9.004920] NILFS version 2 loaded [ 9.006150] ocfs2: Registered cluster interface o2cb [ 9.007107] ocfs2: Registered cluster interface user [ 9.008153] OCFS2 User DLM kernel interface loaded [ 9.011833] gfs2: GFS2 installed [ 9.024309] NET: Registered protocol family 38 [ 9.025403] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245) [ 9.026485] io scheduler noop registered [ 9.027245] io scheduler deadline registered (default) [ 9.027991] io scheduler mq-deadline registered [ 9.029512] io scheduler bfq registered [ 9.030114] test_string_helpers: Running tests... [ 9.035137] test_hexdump: all 1184 tests passed [ 9.037469] Running rhashtable test nelem=8, max_size=0, shrinking=0 [ 9.038351] Test 00: [ 9.043780] Adding 50000 keys [ 9.149408] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.229759] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.230948] Deleting 50000 keys [ 9.291015] Duration of test: 246513029 ns [ 9.291710] Test 01: [ 9.294192] Adding 50000 keys [ 9.399877] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.480326] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.481835] Deleting 50000 keys [ 9.541681] Duration of test: 246927610 ns [ 9.542392] Test 02: [ 9.544933] Adding 50000 keys [ 9.654015] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.740037] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.741277] Deleting 50000 keys [ 9.799247] Duration of test: 253777719 ns [ 9.799962] Test 03: [ 9.802465] Adding 50000 keys [ 9.914602] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.994248] Traversal complete: counted=50000, nelems=50000, entries=50000, table-jumps=0 [ 9.995446] Deleting 50000 keys [ 10.052839] Duration of test: 249823712 ns [ 10.053534] Average test time: 249260517 [ 10.054115] Testing concurrent rhashtable access from 10 threads [ 13.551071] rhashtable_thra (145) used greatest stack depth: 30816 bytes left [ 13.871404] Started 10 threads, 0 failed [ 13.873391] test_printf: all 260 tests passed [ 13.947487] test_bitmap: test 13: input is '0-2047:128/256' OK, Time: 2277 [ 13.953219] test_bitmap: all 460506 tests passed [ 13.953933] test_uuid: all 18 tests passed [ 13.954902] crc32: CRC_LE_BITS = 64, CRC_BE BITS = 64 [ 13.955631] crc32: self tests passed, processed 225944 bytes in 166388 nsec [ 13.956752] crc32c: CRC_LE_BITS = 64 [ 13.957291] crc32c: self tests passed, processed 225944 bytes in 86012 nsec [ 13.990435] crc32_combine: 8373 self tests passed [ 14.023288] crc32c_combine: 8373 self tests passed [ 14.024204] xz_dec_test: module loaded [ 14.024776] xz_dec_test: Create a device node with 'mknod xz_dec_test c 244 0' and write .xz files to it. [ 14.027761] gpio_it87: no device [ 14.028540] gpio-mockup: probe of gpio-mockup failed with error -22 [ 14.031075] VIA Graphics Integration Chipset framebuffer 2.4 initializing [ 14.032323] no IO addresses supplied [ 14.033067] hgafb: HGA card not detected. [ 14.033705] hgafb: probe of hgafb.0 failed with error -22 [ 14.034712] usbcore: registered new interface driver udlfb [ 14.035523] usbcore: registered new interface driver smscufx [ 14.036921] kworker/u4:0 (156) used greatest stack depth: 29816 bytes left [ 14.038639] uvesafb: failed to execute /sbin/v86d [ 14.039334] uvesafb: make sure that the v86d helper is installed and executable [ 14.040441] uvesafb: Getting VBE info block failed (eax=0x4f00, err=-2) [ 14.041339] uvesafb: vbe_init() failed with -22 [ 14.042036] uvesafb: probe of uvesafb.0 failed with error -22 [ 14.042863] intel_idle: does not run on family 6 model 6 [ 14.043683] ipmi message handler version 39.2 [ 14.044367] IPMI System Interface driver. [ 14.045118] ipmi_si: Unable to find any System Interface(s) [ 14.045935] IPMI Watchdog: driver initialized [ 14.046576] Copyright (C) 2004 MontaVista Software - IPMI Powerdown via sys_reboot. [ 14.048920] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 14.050003] ACPI: Power Button [PWRF] [ 14.051188] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 14.052238] ACPI: Power Button [PWRF] [ 14.054135] r3964: Philips r3964 Driver $Revision: 1.10 $ [ 14.054924] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 14.079367] 00:05: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A [ 14.081492] console [ttyS0] disabled [ 14.105751] console [ttyS0] enabled [ 14.130201] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 14.155005] 00:06: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A [ 14.159182] Initializing Nozomi driver 2.1d [ 14.160364] lp: driver loaded but no devices found [ 14.161073] Applicom driver: $Id: ac.c,v 1.30 2000/03/22 16:03:57 dwmw2 Exp $ [ 14.162047] ac.o: No PCI boards found. [ 14.162623] ac.o: For an ISA board you must supply memory and irq parameters. [ 14.163694] ppdev: user-space parallel port driver [ 14.164418] telclk_interrupt = 0xf non-mcpbl0010 hw. [ 14.165131] Linux agpgart interface v0.103 [ 14.166982] [drm] radeon kernel modesetting enabled. [ 14.168571] [drm] Initialized vgem 1.0.0 20120112 for virtual device on minor 0 [ 14.170190] [drm] Found bochs VGA, ID 0xb0c0. [ 14.170828] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000. [ 14.172053] [TTM] Zone kernel: Available graphics memory: 174294 kiB [ 14.172945] [TTM] Initializing pool allocator [ 14.173666] [TTM] Initializing DMA pool allocator [ 14.177669] fbcon: bochsdrmfb (fb0) is primary device [ 14.192295] Console: switching to colour frame buffer device 128x48 [ 14.199399] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device [ 14.200280] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1 [ 14.202669] Console: switching to colour VGA+ 80x25 [ 14.204660] ------------[ cut here ]------------ [ 14.205319] WARNING: CPU: 0 PID: 1 at drivers/gpu/drm/drm_mode_config.c:431 drm_mode_config_cleanup+0xbe/0x300 [ 14.206848] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.14.0-rc8 #1 [ 14.207676] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1 04/01/2014 [ 14.208789] task: ffff880018513040 task.stack: ffff880018518000 [ 14.209587] RIP: 0010:drm_mode_config_cleanup+0xbe/0x300 [ 14.210373] RSP: 0000:ffff88001851fc30 EFLAGS: 00010297 [ 14.211094] RAX: ffff880018513040 RBX: 0000000000000000 RCX: 0000000000000018 [ 14.212028] RDX: 0000000000000000 RSI: 0000000000000003 RDI: 0000000000000246 [ 14.212967] RBP: ffff88001851fc60 R08: 00000000be162c32 R09: 0000000000000001 [ 14.213955] R10: 0000000000000000 R11: 0000000000000000 R12: ffff88001165d500 [ 14.214931] R13: ffff8800110d2780 R14: ffff88001165dd70 R15: 0000000000000001 [ 14.215880] FS: 0000000000000000(0000) GS:ffff880018a00000(0000) knlGS:0000000000000000 [ 14.217019] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 14.217829] CR2: 0000000000000000 CR3: 000000000346f000 CR4: 00000000000006f0 [ 14.218790] Call Trace: [ 14.219191] bochs_kms_fini+0x24/0x40 [ 14.219753] bochs_unload+0x24/0x50 [ 14.220289] ? bochs_pci_remove+0x20/0x20 [ 14.220875] drm_dev_unregister+0x71/0x110 [ 14.221493] drm_put_dev+0x57/0x70 [ 14.221998] bochs_pci_remove+0x19/0x20 [ 14.222587] pci_device_remove+0x63/0x120 [ 14.223168] ? pcibios_free_irq+0x10/0x10 [ 14.223795] driver_probe_device+0x205/0x450 [ 14.224408] ? driver_probe_device+0x450/0x450 [ 14.225063] __driver_attach+0xad/0xf0 [ 14.225644] bus_for_each_dev+0x89/0xf0 [ 14.226198] driver_attach+0x22/0x30 [ 14.226740] bus_add_driver+0x10f/0x290 [ 14.227420] driver_register+0xca/0x120 [ 14.228156] __pci_register_driver+0x78/0x80 [ 14.229154] ? qxl_init+0x68/0x68 [ 14.229678] bochs_init+0x49/0x5c [ 14.230318] do_one_initcall+0xb1/0x1a2 [ 14.231243] kernel_init_freeable+0x153/0x216 [ 14.232169] ? do_early_param+0xbe/0xbe [ 14.232802] ? rest_init+0xd0/0xd0 [ 14.233450] kernel_init+0x13/0x160 [ 14.233991] ? schedule_tail+0xa/0x70 [ 14.234657] ? rest_init+0xd0/0xd0 [ 14.235188] ret_from_fork+0x2a/0x40 [ 14.235738] Code: c3 75 dc e8 b5 6a 74 ff 48 8d 7d d0 e8 ac 86 ff ff 49 8b 84 24 58 08 00 00 49 8d 94 24 58 08 00 00 48 39 c2 74 59 e8 92 6a 74 ff <0f> ff 48 8d 75 d0 4c 89 e7 e8 f4 84 ff ff eb 20 e8 7d 6a 74 ff [ 14.239079] ---[ end trace d08cd7de7c740e16 ]--- [ 14.239774] [drm:drm_mode_config_cleanup] *ERROR* connector Virtual-1 leaked! [ 14.240967] [TTM] Finalizing pool allocator [ 14.241667] [TTM] Finalizing DMA pool allocator [ 14.242603] [TTM] Zone kernel: Used memory at exit: 0 kiB [ 14.244340] [drm] Found bochs VGA, ID 0xb0c0. [ 14.244993] [drm] Framebuffer size 16384 kB @ 0xfd000000, mmio @ 0xfebf0000. [ 14.246245] [TTM] Zone kernel: Available graphics memory: 174294 kiB [ 14.247171] [TTM] Initializing pool allocator [ 14.247866] [TTM] Initializing DMA pool allocator [ 14.250204] fbcon: bochsdrmfb (fb0) is primary device [ 14.265190] Console: switching to colour frame buffer device 128x48 [ 14.272497] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device [ 14.273363] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 1 [ 14.275169] parport_pc 00:04: reported by Plug and Play ACPI [ 14.276113] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 14.357268] lp0: using parport0 (interrupt-driven). [ 14.358681] parport_pc 00:04: reported by Plug and Play ACPI [ 14.359527] parport1: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] [ 14.440447] lp1: using parport1 (interrupt-driven). [ 14.444881] Floppy drive(s): fd0 is 2.88M AMI BIOS [ 14.452120] loop: module loaded [ 14.460461] FDC 0 is a S82078B [ 14.463749] drbd: initialized. Version: 8.4.10 (api:1/proto:86-101) [ 14.464964] drbd: built-in [ 14.465507] drbd: registered as block device major 147 [ 14.467356] rbd: loaded [ 14.467874] mtip32xx Version 1.3.1 [ 14.471745] null: module loaded [ 14.472211] ibmasm: IBM ASM Service Processor Driver version 1.0 loaded [ 14.473181] lkdtm: No crash points registered, enable through debugfs [ 14.474053] Phantom Linux Driver, version n0.9.8, init OK [ 14.475019] Silicon Labs C2 port support v. 0.51.0 - (C) 2007 Rodolfo Giometti [ 14.476031] c2port c2port0: C2 port uc added [ 14.477872] c2port c2port0: uc flash has 30 blocks x 512 bytes (15360 bytes total) [ 14.480522] Guest personality initialized and is inactive [ 14.482751] VMCI host device registered (name=vmci, major=10, minor=55) [ 14.485040] Initialized host personality [ 14.487201] usbcore: registered new interface driver rtsx_usb [ 14.490410] usbcore: registered new interface driver dln2 [ 14.492790] Uniform Multi-Platform E-IDE driver [ 14.495445] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 14.498110] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 14.501088] ide0: BM-DMA at 0xc040-0xc047 [ 14.503468] ide1: BM-DMA at 0xc048-0xc04f [ 14.505759] Probing IDE interface ide0... [ 15.083666] Probing IDE interface ide1... [ 15.830139] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 16.510249] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 16.513164] hdc: MWDMA2 mode selected [ 16.515807] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 16.518479] ide1 at 0x170-0x177,0x376 on irq 15 [ 16.522549] piix 0000:00:01.1: IDE controller (0x8086:0x7010 rev 0x00) [ 16.525935] piix 0000:00:01.1: not 100% native mode: will probe irqs later [ 16.529308] ide0: BM-DMA at 0xc040-0xc047 [ 16.532046] ide1: BM-DMA at 0xc048-0xc04f [ 16.534994] Probing IDE interface ide0... [ 17.113589] Probing IDE interface ide1... [ 17.860122] hdc: QEMU DVD-ROM, ATAPI CD/DVD-ROM drive [ 18.543583] hdc: host max PIO4 wanted PIO255(auto-tune) selected PIO0 [ 18.546728] hdc: MWDMA2 mode selected [ 18.549640] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 [ 18.552382] ide1 at 0x170-0x177,0x376 on irq 15 [ 18.555781] Loading iSCSI transport class v2.0-870. [ 18.559094] rdac: device handler registered [ 18.561868] hp_sw: device handler registered [ 18.564704] alua: device handler registered [ 18.567282] st: Version 20160209, fixed bufsize 32768, s/g segs 256 [ 18.570189] osst :I: Tape driver with OnStream support version 0.99.4 [ 18.570189] osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ [ 18.576317] SCSI Media Changer driver v0.25 [ 18.579086] osd: LOADED open-osd 0.2.1 [ 18.582890] SSFDC read-only Flash Translation layer [ 18.585768] mtdoops: mtd device (mtddev=name/number) must be supplied [ 18.588674] L440GX flash mapping: failed to find PIIX4 ISA bridge, cannot continue [ 18.591771] device id = 2440 [ 18.594341] device id = 2480 [ 18.596869] device id = 24c0 [ 18.599301] device id = 24d0 [ 18.601699] device id = 25a1 [ 18.604094] device id = 2670 [ 18.607883] platform physmap-flash.0: failed to claim resource 0: [mem 0x08000000-0x07ffffff] [ 18.612166] ftl_cs: FTL header not found. [ 18.616556] eql: Equalizer2002: Simon Janes (simon@ncm.com) and David S. Miller (davem@redhat.com) [ 18.620074] MACsec IEEE 802.1AE [ 18.624249] libphy: Fixed MDIO Bus: probed [ 18.628421] tun: Universal TUN/TAP device driver, 1.6 [ 18.631431] arcnet: arcnet loaded [ 18.633870] arcnet:rfc1201: RFC1201 "standard" (`a') encapsulation support loaded [ 18.636790] arcnet:arc_rawmode: raw mode (`r') encapsulation support loaded [ 18.639633] arcnet:capmode: cap mode (`c') encapsulation support loaded [ 18.642495] arcnet:com90xx: COM90xx chipset support [ 18.947635] S3: No ARCnet cards found. [ 18.950507] arcnet:arc_rimi: RIM I (entirely mem-mapped) support [ 18.953663] arcnet:arc_rimi: E-mail me if you actually test the RIM I driver, please! [ 18.956731] arcnet:arc_rimi: Given: node 00h, shmem 0h, irq 0 [ 18.959546] arcnet:arc_rimi: No autoprobe for RIM I; you must specify the shmem and irq! [ 18.962648] arcnet:com20020_pci: COM20020 PCI support [ 18.965600] ipddp.c:v0.01 8/28/97 Bradford W. Johnson [ 18.969210] ipddp0: Appletalk-IP Decap. mode by Jay Schulist [ 18.972968] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f [ 18.976258] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 18.979391] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 19.634638] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 19.976142] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 19.979472] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 21.673878] e1000 0000:00:03.0 eth0: (PCI:33MHz:32-bit) 52:54:00:12:34:56 [ 21.677280] e1000 0000:00:03.0 eth0: Intel(R) PRO/1000 Network Connection [ 21.680461] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k [ 21.683474] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 21.686579] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k [ 21.689762] igb: Copyright (c) 2007-2014 Intel Corporation. [ 21.692885] ixgbe: Intel(R) 10 Gigabit PCI Express Network Driver - version 5.1.0-k [ 21.696157] ixgbe: Copyright (c) 1999-2016 Intel Corporation. [ 21.700257] PPP generic driver version 2.4.2 [ 21.703559] PPP BSD Compression module registered [ 21.706523] PPP MPPE Compression module registered [ 21.709503] NET: Registered protocol family 24 [ 21.712477] x25_asy: X.25 async: version 0.00 ALPHA (dynamic channels, max=256) [ 21.715741] DLCI driver v0.35, 4 Jan 1997, mike.mclagan@linux.org. [ 21.718917] Loaded prism54 driver, version 1.2 [ 21.722203] usbcore: registered new interface driver i2400m_usb [ 21.725421] VMware vmxnet3 virtual NIC driver - version 1.4.a.0-k-NAPI [ 21.728797] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver [ 21.732236] usbcore: registered new interface driver pegasus [ 21.735448] usbcore: registered new interface driver rtl8150 [ 21.738676] usbcore: registered new interface driver r8152 [ 21.741853] hso: drivers/net/usb/hso.c: Option Wireless [ 21.745339] usbcore: registered new interface driver hso [ 21.748575] usbcore: registered new interface driver lan78xx [ 21.751763] usbcore: registered new interface driver asix [ 21.754865] usbcore: registered new interface driver ax88179_178a [ 21.758051] usbcore: registered new interface driver cdc_ether [ 21.761167] usbcore: registered new interface driver sr9700 [ 21.764184] usbcore: registered new interface driver CoreChips [ 21.767203] usbcore: registered new interface driver smsc95xx [ 21.770180] usbcore: registered new interface driver gl620a [ 21.773046] usbcore: registered new interface driver rndis_host [ 21.775998] usbcore: registered new interface driver cdc_subset [ 21.778866] usbcore: registered new interface driver zaurus [ 21.781691] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 21.784693] usbcore: registered new interface driver int51x1 [ 21.787391] usbcore: registered new interface driver cdc_phonet [ 21.790120] usbcore: registered new interface driver kalmia [ 21.792766] usbcore: registered new interface driver sierra_net [ 21.795483] usbcore: registered new interface driver cx82310_eth [ 21.798145] usbcore: registered new interface driver cdc_ncm [ 21.800691] usbcore: registered new interface driver huawei_cdc_ncm [ 21.803219] usbcore: registered new interface driver lg-vl600 [ 21.805715] usbcore: registered new interface driver qmi_wwan [ 21.808132] usbcore: registered new interface driver cdc_mbim [ 21.810513] usbcore: registered new interface driver ch9200 [ 21.812749] Fusion MPT base driver 3.04.20 [ 21.814870] Copyright (c) 1999-2008 LSI Corporation [ 21.817108] Fusion MPT SPI Host driver 3.04.20 [ 21.819305] Fusion MPT SAS Host driver 3.04.20 [ 21.821482] Fusion MPT misc device (ioctl) driver 3.04.20 [ 21.823855] mptctl: Registered with Fusion MPT base driver [ 21.826036] mptctl: /dev/mptctl @ (major,minor=10,220) [ 21.828622] parport1: cannot grant exclusive access for device ks0108 [ 21.830919] ks0108: ERROR: parport didn't register new device [ 21.833203] panel: panel driver not yet registered [ 21.836813] aoe: AoE v85 initialised. [ 21.839164] usbcore: registered new interface driver hwa-rc [ 21.841583] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 21.844007] ehci-platform: EHCI generic platform driver [ 21.846309] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 21.848633] ohci-platform: OHCI generic platform driver [ 21.850932] driver u132_hcd [ 21.853115] usbcore: registered new interface driver hwa-hc [ 21.855403] fotg210_hcd: FOTG210 Host Controller (EHCI) Driver [ 21.857698] Warning! fotg210_hcd should always be loaded before uhci_hcd and ohci_hcd, not after [ 21.860572] usbcore: registered new interface driver wusb-cbaf [ 21.862853] usbcore: registered new interface driver cdc_acm [ 21.865127] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters [ 21.867688] usbcore: registered new interface driver cdc_wdm [ 21.869941] usbcore: registered new interface driver usbtmc [ 21.872229] usbcore: registered new interface driver usb-storage [ 21.874677] usbcore: registered new interface driver ums-alauda [ 21.877150] usbcore: registered new interface driver ums-cypress [ 21.879540] usbcore: registered new interface driver ums_eneub6250 [ 21.881952] usbcore: registered new interface driver ums-freecom [ 21.884414] usbcore: registered new interface driver ums-isd200 [ 21.886832] usbcore: registered new interface driver ums-jumpshot [ 21.889123] usbcore: registered new interface driver ums-karma [ 21.891425] usbcore: registered new interface driver ums-onetouch [ 21.893742] usbcore: registered new interface driver ums-realtek [ 21.896042] usbcore: registered new interface driver ums-sddr55 [ 21.898320] usbcore: registered new interface driver ums-usbat [ 21.900607] usbcore: registered new interface driver mdc800 [ 21.902773] mdc800: v0.7.5 (30/10/2000):USB Driver for Mustek MDC800 Digital Camera [ 21.905311] usbcore: registered new interface driver microtekX6 [ 21.907770] usbcore: registered new interface driver usbserial [ 21.910172] usbcore: registered new interface driver usbserial_generic [ 21.912688] usbserial: USB Serial support registered for generic [ 21.915117] usbcore: registered new interface driver ark3116 [ 21.917597] usbserial: USB Serial support registered for ark3116 [ 21.920073] usbcore: registered new interface driver belkin_sa [ 21.922565] usbserial: USB Serial support registered for Belkin / Peracom / GoHubs USB Serial Adapter [ 21.925526] usbcore: registered new interface driver ch341 [ 21.928148] usbserial: USB Serial support registered for ch341-uart [ 21.930806] usbcore: registered new interface driver cp210x [ 21.933377] usbserial: USB Serial support registered for cp210x [ 21.936072] usbcore: registered new interface driver cypress_m8 [ 21.938756] usbserial: USB Serial support registered for DeLorme Earthmate USB [ 21.941598] usbserial: USB Serial support registered for HID->COM RS232 Adapter [ 21.944418] usbserial: USB Serial support registered for Nokia CA-42 V2 Adapter [ 21.947229] usbcore: registered new interface driver usb_debug [ 21.950093] usbserial: USB Serial support registered for debug [ 21.952707] usbserial: USB Serial support registered for xhci_dbc [ 21.955350] usbcore: registered new interface driver io_edgeport [ 21.957978] usbserial: USB Serial support registered for Edgeport 2 port adapter [ 21.960781] usbserial: USB Serial support registered for Edgeport 4 port adapter [ 21.963518] usbserial: USB Serial support registered for Edgeport 8 port adapter [ 21.966167] usbserial: USB Serial support registered for EPiC device [ 21.968743] usbcore: registered new interface driver io_ti [ 21.971206] usbserial: USB Serial support registered for Edgeport TI 1 port adapter [ 21.973916] usbserial: USB Serial support registered for Edgeport TI 2 port adapter [ 21.976597] usbcore: registered new interface driver empeg [ 21.979057] usbserial: USB Serial support registered for empeg [ 21.981496] usbcore: registered new interface driver f81232 [ 21.983954] usbserial: USB Serial support registered for f81232 [ 21.986374] usbcore: registered new interface driver f81534 [ 21.988794] usbserial: USB Serial support registered for Fintek F81532/F81534 [ 21.991401] usbcore: registered new interface driver ftdi_sio [ 21.993937] usbserial: USB Serial support registered for FTDI USB Serial Device [ 21.996623] usbcore: registered new interface driver garmin_gps [ 21.999276] usbserial: USB Serial support registered for Garmin GPS usb/tty [ 22.002117] usbcore: registered new interface driver ipaq [ 22.004774] usbserial: USB Serial support registered for PocketPC PDA [ 22.007567] usbcore: registered new interface driver iuu_phoenix [ 22.010343] usbserial: USB Serial support registered for iuu_phoenix [ 22.013167] usbcore: registered new interface driver keyspan [ 22.016024] usbserial: USB Serial support registered for Keyspan - (without firmware) [ 22.019138] usbserial: USB Serial support registered for Keyspan 1 port adapter [ 22.022196] usbserial: USB Serial support registered for Keyspan 2 port adapter [ 22.025268] usbserial: USB Serial support registered for Keyspan 4 port adapter [ 22.028341] usbcore: registered new interface driver kl5kusb105 [ 22.031243] usbserial: USB Serial support registered for KL5KUSB105D / PalmConnect [ 22.034346] usbcore: registered new interface driver mct_u232 [ 22.037274] usbserial: USB Serial support registered for MCT U232 [ 22.040413] usbcore: registered new interface driver mxuport [ 22.043396] usbserial: USB Serial support registered for MOXA UPort [ 22.046446] usbcore: registered new interface driver navman [ 22.049418] usbserial: USB Serial support registered for navman [ 22.052411] usbcore: registered new interface driver omninet [ 22.055403] usbserial: USB Serial support registered for ZyXEL - omni.net lcd plus usb [ 22.058973] usbcore: registered new interface driver option [ 22.061889] usbserial: USB Serial support registered for GSM modem (1-port) [ 22.064927] usbcore: registered new interface driver pl2303 [ 22.067828] usbserial: USB Serial support registered for pl2303 [ 22.070795] usbcore: registered new interface driver qcaux [ 22.073679] usbserial: USB Serial support registered for qcaux [ 22.076603] usbcore: registered new interface driver quatech2 [ 22.079553] usbserial: USB Serial support registered for Quatech 2nd gen USB to Serial Driver [ 22.082799] usbcore: registered new interface driver sierra [ 22.085949] usbserial: USB Serial support registered for Sierra USB modem [ 22.089281] usbcore: registered new interface driver spcp8x5 [ 22.092421] usbserial: USB Serial support registered for SPCP8x5 [ 22.095485] usbcore: registered new interface driver ssu100 [ 22.098536] usbserial: USB Serial support registered for Quatech SSU-100 USB to Serial Driver [ 22.101981] usbcore: registered new interface driver symbolserial [ 22.105200] usbserial: USB Serial support registered for symbol [ 22.108415] usbcore: registered new interface driver upd78f0730 [ 22.111626] usbserial: USB Serial support registered for upd78f0730 [ 22.114898] usbcore: registered new interface driver visor [ 22.119154] usbserial: USB Serial support registered for Handspring Visor / Palm OS [ 22.122573] usbserial: USB Serial support registered for Sony Clie 5.0 [ 22.125902] usbserial: USB Serial support registered for Sony Clie 3.5 [ 22.129164] usbcore: registered new interface driver wishbone_serial [ 22.132418] usbserial: USB Serial support registered for wishbone_serial [ 22.135692] usbcore: registered new interface driver whiteheat [ 22.138855] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT - (prerenumeration) [ 22.142420] usbserial: USB Serial support registered for Connect Tech - WhiteHEAT [ 22.145782] usbcore: registered new interface driver appledisplay [ 22.149005] usbcore: registered new interface driver cypress_cy7c63 [ 22.152371] ftdi_elan: driver ftdi-elan [ 22.155313] usbcore: registered new interface driver ftdi-elan [ 22.158442] usbcore: registered new interface driver iowarrior [ 22.161519] usbcore: registered new interface driver isight_firmware [ 22.164711] usbcore: registered new interface driver usblcd [ 22.167682] usbcore: registered new interface driver ldusb [ 22.170624] usbcore: registered new interface driver legousbtower [ 22.173815] usbcore: registered new interface driver trancevibrator [ 22.176865] usbcore: registered new interface driver uss720 [ 22.179769] uss720: USB Parport Cable driver for Cables using the Lucent Technologies USS720 Chip [ 22.183028] uss720: NOTE: this is a special purpose driver to allow nonstandard [ 22.186120] uss720: protocols (eg. bitbang) over USS720 usb to parallel cables [ 22.189222] uss720: If you just want to connect to a printer, use usblp instead [ 22.192375] usbcore: registered new interface driver usbsevseg [ 22.195430] usbcore: registered new interface driver yurex [ 22.198409] usbcore: registered new interface driver sisusb [ 22.202117] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 22.205068] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1 [ 22.208190] vhci_hcd: created sysfs vhci_hcd.0 [ 22.211965] hub 1-0:1.0: USB hub found [ 22.214719] hub 1-0:1.0: 8 ports detected [ 22.219193] hub 1-0:1.0: USB hub found [ 22.221833] hub 1-0:1.0: 8 ports detected [ 22.226778] hub 1-0:1.0: USB hub found [ 22.229331] hub 1-0:1.0: 8 ports detected [ 22.233407] hub 1-0:1.0: USB hub found [ 22.235924] hub 1-0:1.0: 8 ports detected [ 22.239705] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 22.242354] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 [ 22.245221] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 22.248868] hub 2-0:1.0: USB hub found [ 22.251360] hub 2-0:1.0: 8 ports detected [ 22.255605] hub 2-0:1.0: USB hub found [ 22.258005] hub 2-0:1.0: 8 ports detected [ 22.262565] hub 2-0:1.0: USB hub found [ 22.264887] hub 2-0:1.0: 8 ports detected [ 22.268959] hub 2-0:1.0: USB hub found [ 22.271468] hub 2-0:1.0: 8 ports detected [ 22.275215] vhci_hcd vhci_hcd.0: remove, state 1 [ 22.277594] usb usb2: USB disconnect, device number 1 [ 22.281820] vhci_hcd: stop threads [ 22.284044] vhci_hcd: release socket [ 22.286217] vhci_hcd: disconnect device [ 22.288520] vhci_hcd: stop threads [ 22.290577] vhci_hcd: release socket [ 22.292606] vhci_hcd: disconnect device [ 22.294772] vhci_hcd: stop threads [ 22.296784] vhci_hcd: release socket [ 22.298750] vhci_hcd: disconnect device [ 22.300875] vhci_hcd: stop threads [ 22.302806] vhci_hcd: release socket [ 22.304762] vhci_hcd: disconnect device [ 22.306906] vhci_hcd: stop threads [ 22.308946] vhci_hcd: release socket [ 22.311055] vhci_hcd: disconnect device [ 22.313139] vhci_hcd: stop threads [ 22.315139] vhci_hcd: release socket [ 22.317059] vhci_hcd: disconnect device [ 22.319006] vhci_hcd: stop threads [ 22.320864] vhci_hcd: release socket [ 22.322638] vhci_hcd: disconnect device [ 22.324504] vhci_hcd: stop threads [ 22.326201] vhci_hcd: release socket [ 22.328028] vhci_hcd: disconnect device [ 22.329822] vhci_hcd vhci_hcd.0: USB bus 2 deregistered [ 22.331747] vhci_hcd vhci_hcd.0: remove, state 1 [ 22.333587] usb usb1: USB disconnect, device number 1 [ 22.336695] vhci_hcd: stop threads [ 22.338440] vhci_hcd: release socket [ 22.340267] vhci_hcd: disconnect device [ 22.342204] vhci_hcd: stop threads [ 22.344036] vhci_hcd: release socket [ 22.345735] vhci_hcd: disconnect device [ 22.347737] vhci_hcd: stop threads [ 22.349479] vhci_hcd: release socket [ 22.351291] vhci_hcd: disconnect device [ 22.353090] vhci_hcd: stop threads [ 22.354779] vhci_hcd: release socket [ 22.356347] vhci_hcd: disconnect device [ 22.358076] vhci_hcd: stop threads [ 22.359639] vhci_hcd: release socket [ 22.361281] vhci_hcd: disconnect device [ 22.362960] vhci_hcd: stop threads [ 22.364580] vhci_hcd: release socket [ 22.366160] vhci_hcd: disconnect device [ 22.367871] vhci_hcd: stop threads [ 22.369411] vhci_hcd: release socket [ 22.371015] vhci_hcd: disconnect device [ 22.372611] vhci_hcd: stop threads [ 22.374147] vhci_hcd: release socket [ 22.375671] vhci_hcd: disconnect device [ 22.377346] vhci_hcd vhci_hcd.0: USB bus 1 deregistered [ 22.379165] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 22.381019] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 1 [ 22.383037] vhci_hcd: created sysfs vhci_hcd.0 [ 22.385556] hub 1-0:1.0: USB hub found [ 22.387280] hub 1-0:1.0: 8 ports detected [ 22.390630] hub 1-0:1.0: USB hub found [ 22.392298] hub 1-0:1.0: 8 ports detected [ 22.396061] hub 1-0:1.0: USB hub found [ 22.397870] hub 1-0:1.0: 8 ports detected [ 22.401218] hub 1-0:1.0: USB hub found [ 22.402952] hub 1-0:1.0: 8 ports detected [ 22.406029] vhci_hcd vhci_hcd.0: USB/IP Virtual Host Controller [ 22.408000] vhci_hcd vhci_hcd.0: new USB bus registered, assigned bus number 2 [ 22.410208] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM. [ 22.413143] hub 2-0:1.0: USB hub found [ 22.415064] hub 2-0:1.0: 8 ports detected [ 22.418729] hub 2-0:1.0: USB hub found [ 22.420647] hub 2-0:1.0: 8 ports detected [ 22.424828] hub 2-0:1.0: USB hub found [ 22.426859] hub 2-0:1.0: 8 ports detected [ 22.430537] hub 2-0:1.0: USB hub found [ 22.432405] hub 2-0:1.0: 8 ports detected [ 22.435909] usbcore: registered new device driver usbip-host [ 22.438494] usbip-vudc usbip-vudc.0: unregistering gadget [ 22.440856] udc usbip-vudc.0: releasing 'usbip-vudc.0' [ 22.442866] gadget: usb_udc_nop_release [ 22.445123] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 22.448533] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 22.450705] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 22.454883] mousedev: PS/2 mouse device common for all mice [ 22.457092] evbug: Connected device: input1 (Power Button at LNXPWRBN/button/input0) [ 22.460124] usbcore: registered new interface driver appletouch [ 22.463027] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 22.463417] evbug: Connected device: input2 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 22.469091] usbcore: registered new interface driver bcm5974 [ 22.472563] usbcore: registered new interface driver xpad [ 22.475118] evbug: Disconnected device: input2 [ 22.475607] rtc_cmos 00:00: RTC can wake from S4 [ 22.475785] rtc rtc0: alarm rollover: day [ 22.477735] rtc rtc0: rtc_cmos: dev (249:0) [ 22.477747] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0 [ 22.478131] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 22.480809] rtc_cmos 00:00: RTC can wake from S4 [ 22.480995] rtc rtc1: alarm rollover: day [ 22.482929] rtc rtc1: rtc_cmos: dev (249:1) [ 22.482933] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc1 [ 22.483082] rtc_cmos 00:00: alarms up to one day, y3k, 114 bytes nvram, hpet irqs [ 22.484256] rtc rtc2: alarm rollover: day [ 22.485427] rtc rtc2: test: dev (249:2) [ 22.485431] rtc-test rtc-test.0: rtc core: registered test as rtc2 [ 22.488179] rtc rtc2: alarm rollover: day [ 22.490921] rtc rtc2: test: dev (249:2) [ 22.490925] rtc-test rtc-test.0: rtc core: registered test as rtc2 [ 22.491085] rtc rtc3: alarm rollover: day [ 22.493546] rtc rtc3: test: dev (249:3) [ 22.493550] rtc-test rtc-test.1: rtc core: registered test as rtc3 [ 22.496103] rtc rtc3: alarm rollover: day [ 22.498540] rtc rtc3: test: dev (249:3) [ 22.498543] rtc-test rtc-test.1: rtc core: registered test as rtc3 [ 22.498821] i2c /dev entries driver [ 22.499203] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 22.509135] hub 1-0:1.0: hub_ext_port_status failed (err = -113) [ 22.538254] hub 2-0:1.0: hub_ext_port_status failed (err = -113) [ 22.547739] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 22.551200] evbug: Connected device: input3 (AT Translated Set 2 keyboard at isa0060/serio0/input0) [ 22.672539] piix4_smbus 0000:00:01.3: SMBus Host Controller at 0x700, revision 0 [ 22.847375] usbcore: registered new interface driver i2c-diolan-u2c [ 22.850704] i2c-parport: adapter type unspecified [ 22.853676] i2c-parport-light: adapter type unspecified [ 22.856866] usbcore: registered new interface driver i2c-tiny-usb [ 22.860243] lirc_dev: IR Remote Control driver registered, major 509 [ 22.863475] IR JVC protocol handler initialized [ 22.866425] IR SANYO protocol handler initialized [ 22.869399] IR Sharp protocol handler initialized [ 22.872320] IR MCE Keyboard/mouse protocol handler initialized [ 22.875337] IR XMP protocol handler initialized [ 22.878428] pps pps0: new PPS source ktimer [ 22.881233] pps pps0: ktimer PPS source registered [ 22.884191] Driver for 1-wire Dallas network protocol. [ 22.887228] usbcore: registered new interface driver DS9490R [ 22.890208] DS1WM w1 busmaster driver - (c) 2004 Szabolcs Gyurko [ 22.893286] __power_supply_register: Expected proper parent device for 'test_ac' [ 22.897485] __power_supply_register: Expected proper parent device for 'test_battery' [ 22.900842] __power_supply_register: Expected proper parent device for 'test_usb' [ 23.405696] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 [ 23.409402] evbug: Connected device: input5 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0) [ 23.413515] evbug: Disconnected device: input5 [ 23.553471] applesmc: supported laptop not found! [ 23.558205] applesmc: driver init failed (ret=-19)! [ 23.720156] f71882fg: Not a Fintek device [ 23.723201] f71882fg: Not a Fintek device [ 24.265157] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input6 [ 24.268936] evbug: Connected device: input6 (ImExPS/2 Generic Explorer Mouse at isa0060/serio1/input0) [ 24.526823] pc87360: PC8736x not detected, module not inserted [ 24.530180] sch56xx_common: Unsupported device id: 0xff [ 24.533138] sch56xx_common: Unsupported device id: 0xff [ 24.804480] intel_powerclamp: CPU does not support MWAIT [ 24.804887] acquirewdt: WDT driver for Acquire single board computer initialising [ 24.811452] acquirewdt: I/O address 0x0043 already in use [ 24.814470] acquirewdt: probe of acquirewdt failed with error -5 [ 24.817738] sp5100_tco: SP5100/SB800 TCO WatchDog Timer Driver v0.05 [ 24.820974] ib700wdt: WDT driver for IB700 single board computer initialising [ 24.824883] i6300esb: Intel 6300ESB WatchDog Timer Driver v0.05 [ 24.828176] i6300esb: cannot register miscdev on minor=130 (err=-16) [ 24.831341] i6300ESB timer: probe of 0000:00:04.0 failed with error -16 [ 24.834588] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11 [ 24.837825] it87_wdt: no device [ 24.840746] sc1200wdt: build 20020303 [ 24.843626] sc1200wdt: io parameter must be specified [ 24.846594] pc87413_wdt: Version 1.1 at io 0x2E [ 24.849540] pc87413_wdt: cannot register miscdev on minor=130 (err=-16) [ 24.852691] sbc60xxwdt: I/O address 0x0443 already in use [ 24.855692] cpu5wdt: misc_register failed [ 24.858454] smsc37b787_wdt: SMsC 37B787 watchdog component driver 1.1 initialising... [ 24.862784] smsc37b787_wdt: Unable to register miscdev on minor 130 [ 24.865948] w83877f_wdt: I/O address 0x0443 already in use [ 24.868926] w83977f_wdt: driver v1.00 [ 24.871669] w83977f_wdt: cannot register miscdev on minor=130 (err=-16) [ 24.874723] machzwd: MachZ ZF-Logic Watchdog driver initializing [ 24.877786] machzwd: no ZF-Logic found [ 24.880934] watchdog: Software Watchdog: cannot register miscdev on minor=130 (err=-16). [ 24.884298] watchdog: Software Watchdog: a legacy watchdog module is probably present. [ 24.888101] softdog: initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0) [ 24.891777] Bluetooth: HCI UART driver ver 2.3 [ 24.894762] Bluetooth: HCI UART protocol H4 registered [ 24.897850] Bluetooth: HCI UART protocol BCSP registered [ 24.900966] Bluetooth: HCI UART protocol LL registered [ 24.904053] Bluetooth: HCI UART protocol ATH3K registered [ 24.907144] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 24.910210] Bluetooth: HCI UART protocol QCA registered [ 24.913190] Bluetooth: HCI UART protocol AG6XX registered [ 24.916168] Bluetooth: HCI UART protocol Marvell registered [ 24.919142] usbcore: registered new interface driver bpa10x [ 24.922235] usbcore: registered new interface driver btusb [ 24.926040] CAPI 2.0 started up with major 68 (no middleware) [ 24.928951] Modular ISDN core version 1.1.29 [ 24.931953] NET: Registered protocol family 34 [ 24.934696] DSP module 2.0 [ 24.937268] mISDN_dsp: DSP clocks every 80 samples. This equals 3 jiffies. [ 24.945355] b1pci: revision 1.1.2.2 [ 24.947995] b1: revision 1.1.2.2 [ 24.950511] b1dma: revision 1.1.2.3 [ 24.953058] t1pci: revision 1.1.2.2 [ 24.955642] AVM Fritz PCI driver Rev. 2.3 [ 24.958298] Sedlbauer Speedfax+ Driver Rev. 2.0 [ 24.960947] Infineon ISDN Driver Rev. 1.0 [ 24.963520] mISDNipac module version 2.0 [ 24.965994] mISDN: ISAR driver Rev. 2.1 [ 24.968439] gigaset: Driver for Gigaset 307x (debug build) [ 24.971071] gigaset: no ISDN subsystem interface [ 24.975375] leds_ss4200: no LED devices found [ 24.979419] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 24.982465] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 24.986589] fw_cfg: probe of QEMU0002:00 failed with error -16 [ 24.989416] hidraw: raw HID events driver (C) Jiri Kosina [ 24.995457] NET: Registered protocol family 40 [ 24.998143] cros_ec_lpcs: unsupported system. [ 25.001111] AMD(R) PCI-E Non-Transparent Bridge Driver 1.0 [ 25.003783] Intel(R) PCI-E Non-Transparent Bridge Driver 2.0 [ 25.022698] no UART detected at 0x1 [ 25.027241] usbcore: registered new interface driver snd-usb-usx2y [ 25.029939] usbcore: registered new interface driver snd-usb-caiaq [ 25.032670] usbcore: registered new interface driver snd-usb-6fire [ 25.036283] usbcore: registered new interface driver snd_usb_pod [ 25.038886] usbcore: registered new interface driver snd_usb_podhd [ 25.041641] usbcore: registered new interface driver snd_usb_toneport [ 25.048623] NET: Registered protocol family 26 [ 25.051071] Netfilter messages via NETLINK v0.30. [ 25.053507] nf_tables: (c) 2007-2009 Patrick McHardy [ 25.056088] nf_tables_compat: (c) 2012 Pablo Neira Ayuso [ 25.058733] IPVS: Registered protocols (TCP, SCTP, ESP) [ 25.061252] IPVS: Connection hash table configured (size=4096, memory=64Kbytes) [ 25.063876] IPVS: Each connection entry needs 408 bytes at least [ 25.066811] IPVS: ipvs loaded. [ 25.069009] IPVS: [rr] scheduler registered. [ 25.071356] IPVS: [lc] scheduler registered. [ 25.073699] IPVS: [wlc] scheduler registered. [ 25.076002] IPVS: [ovf] scheduler registered. [ 25.078324] IPVS: [lblc] scheduler registered. [ 25.080670] IPVS: [lblcr] scheduler registered. [ 25.082988] IPVS: [dh] scheduler registered. [ 25.085321] IPVS: [sh] scheduler registered. [ 25.087578] IPVS: [sed] scheduler registered. [ 25.089822] IPVS: [nq] scheduler registered. [ 25.092161] gre: GRE over IPv4 demultiplexor driver [ 25.094521] ip_gre: GRE over IPv4 tunneling driver [ 25.098337] IPv4 over IPsec tunneling driver [ 25.102359] NET: Registered protocol family 10 [ 25.106606] Segment Routing with IPv6 [ 25.109033] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver [ 25.112186] NET: Registered protocol family 17 [ 25.114852] Ebtables v2.0 registered [ 25.117779] NET: Registered protocol family 4 [ 25.120304] NET: Registered protocol family 5 [ 25.122688] NET: Registered protocol family 9 [ 25.125084] X25: Linux Version 0.2 [ 25.127668] NET: Registered protocol family 33 [ 25.129986] Key type rxrpc registered [ 25.132260] Key type rxrpc_s registered [ 25.135184] NET: Registered protocol family 41 [ 25.137634] lec:lane_module_init: lec.c: initialized [ 25.139982] mpoa:atm_mpoa_init: mpc.c: initialized [ 25.142237] NET: Registered protocol family 35 [ 25.145960] DCCP: Activated CCID 2 (TCP-like) [ 25.149414] sctp: Hash tables configured (bind 32/51) [ 25.152170] tipc: Activated (version 2.0.0) [ 25.154564] NET: Registered protocol family 30 [ 25.157301] tipc: Started in single node mode [ 25.159499] 9pnet: Installing 9P2000 support [ 25.161833] NET: Registered protocol family 37 [ 25.164150] Key type dns_resolver registered [ 25.166405] Key type ceph registered [ 25.169651] libceph: loaded (mon/osd proto 15/24) [ 25.173255] batman_adv: B.A.T.M.A.N. advanced 2017.3 (compatibility version 15) loaded [ 25.175968] openvswitch: Open vSwitch switching datapath [ 25.179056] mpls_gso: MPLS GSO support [ 25.181557] start plist test [ 25.190270] end plist test [ 25.194701] ... APIC ID: 00000000 (0) [ 25.196699] ... APIC VERSION: 01050014 [ 25.198023] 0000000000000000000000000000000000000000000000000000000000000000 [ 25.205478] number of MP IRQ sources: 15. [ 25.207647] number of IO-APIC #0 registers: 24. [ 25.209816] testing the IO APIC....................... [ 25.212102] IO APIC #0...... [ 25.214133] .... register #00: 00000000 [ 25.216286] ....... : physical APIC id: 00 [ 25.218501] ....... : Delivery Type: 0 [ 25.220679] ....... : LTS : 0 [ 25.222823] .... register #01: 00170011 [ 25.224944] ....... : max redirection entries: 17 [ 25.227231] ....... : PRQ implemented: 0 [ 25.229378] ....... : IO APIC version: 11 [ 25.231529] .... register #02: 00000000 [ 25.233628] ....... : arbitration: 00 [ 25.235714] .... IRQ redirection table: [ 25.237784] IOAPIC 0: [ 25.239663] pin00, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.242211] pin01, enabled , edge , high, V(31), IRR(0), S(0), logical , D(03), M(1) [ 25.244745] pin02, enabled , edge , high, V(30), IRR(0), S(0), logical , D(03), M(1) [ 25.247299] pin03, enabled , edge , high, V(33), IRR(0), S(0), logical , D(03), M(1) [ 25.249808] pin04, enabled , edge , high, V(34), IRR(0), S(0), logical , D(03), M(1) [ 25.252336] pin05, disabled, level, high, V(35), IRR(0), S(0), logical , D(03), M(1) [ 25.254806] pin06, enabled , edge , high, V(36), IRR(0), S(0), logical , D(03), M(1) [ 25.257311] pin07, enabled , edge , high, V(37), IRR(0), S(0), logical , D(03), M(1) [ 25.259769] pin08, enabled , edge , high, V(38), IRR(0), S(0), logical , D(03), M(1) [ 25.262182] pin09, enabled , level, high, V(39), IRR(0), S(0), logical , D(03), M(1) [ 25.264594] pin0a, disabled, level, high, V(3A), IRR(0), S(0), logical , D(03), M(1) [ 25.267001] pin0b, disabled, level, high, V(3B), IRR(0), S(0), logical , D(03), M(1) [ 25.269335] pin0c, enabled , edge , high, V(3C), IRR(0), S(0), logical , D(03), M(1) [ 25.271653] pin0d, enabled , edge , high, V(3D), IRR(0), S(0), logical , D(03), M(1) [ 25.273960] pin0e, enabled , edge , high, V(3E), IRR(0), S(0), logical , D(03), M(1) [ 25.276219] pin0f, enabled , edge , high, V(3F), IRR(0), S(0), logical , D(03), M(1) [ 25.278459] pin10, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.280695] pin11, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.282910] pin12, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.285074] pin13, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.287249] pin14, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.289365] pin15, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.291470] pin16, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.293498] pin17, disabled, edge , high, V(00), IRR(0), S(0), physical, D(00), M(0) [ 25.295439] IRQ to pin mappings: [ 25.296986] IRQ0 -> 0:2 [ 25.298378] IRQ1 -> 0:1 [ 25.299794] IRQ3 -> 0:3 [ 25.301174] IRQ4 -> 0:4 [ 25.302504] IRQ5 -> 0:5 [ 25.303839] IRQ6 -> 0:6 [ 25.305159] IRQ7 -> 0:7 [ 25.306449] IRQ8 -> 0:8 [ 25.307715] IRQ9 -> 0:9 [ 25.308935] IRQ10 -> 0:10 [ 25.310156] IRQ11 -> 0:11 [ 25.311335] IRQ12 -> 0:12 [ 25.312543] IRQ13 -> 0:13 [ 25.313741] IRQ14 -> 0:14 [ 25.314950] IRQ15 -> 0:15 [ 25.316129] .................................... done. [ 25.317638] sched_clock: Marking stable (25317571710, 0)->(25887058515, -569486805) [ 25.320130] registered taskstats version 1 [ 25.321559] page_owner is disabled [ 25.325938] Btrfs loaded, crc32c=crc32c-generic, debug=on [ 25.328109] Key type encrypted registered [ 25.330806] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f [ 25.332539] DSA: switch 0 0 parsed [ 25.333889] DSA: tree 0 parsed [ 25.336994] libphy: dsa slave smi: probed [ 25.338564] Generic PHY dsa-0.0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:00, irq=POLL) [ 25.341743] Generic PHY dsa-0.0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:01, irq=POLL) [ 25.344600] Generic PHY dsa-0.0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:02, irq=POLL) [ 25.347508] Generic PHY dsa-0.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:03, irq=POLL) [ 25.420644] DSA: tree 0 unapplied [ 25.422473] dsa-loop fixed-0:1f: DSA mockup driver: 0x1f [ 25.424257] DSA: switch 0 0 parsed [ 25.425819] DSA: tree 0 parsed [ 25.427938] libphy: dsa slave smi: probed [ 25.429642] Generic PHY dsa-0.0:00: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:00, irq=POLL) [ 25.432753] Generic PHY dsa-0.0:01: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:01, irq=POLL) [ 25.435849] Generic PHY dsa-0.0:02: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:02, irq=POLL) [ 25.438897] Generic PHY dsa-0.0:03: attached PHY driver [Generic PHY] (mii_bus:phy_addr=dsa-0.0:03, irq=POLL) [ 25.442066] console [netcon0] enabled [ 25.443846] netconsole: network logging started [ 25.445860] gtp: GTP module loaded (pdp ctx size 104 bytes) [ 25.447993] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 25.450129] EDD information not available. [ 25.452745] IP-Config: Failed to open ipddp0 [ 25.457731] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [ 25.460777] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX [ 25.463841] IP-Config: Failed to open gretap0 [ 25.465989] IP-Config: Failed to open erspan0 [ 25.471083] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready [ 25.476255] IPv6: ADDRCONF(NETDEV_UP): lan2: link is not ready [ 25.481415] IPv6: ADDRCONF(NETDEV_UP): lan3: link is not ready [ 25.486529] IPv6: ADDRCONF(NETDEV_UP): lan4: link is not ready [ 25.488941] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 25.503398] Sending DHCP requests ., OK [ 25.506131] IP-Config: Got DHCP answer from 10.0.2.2, my address is 10.0.2.15 [ 25.508759] IP-Config: Complete: [ 25.510976] device=eth0, hwaddr=52:54:00:12:34:56, ipaddr=10.0.2.15, mask=255.255.255.0, gw=10.0.2.2 [ 25.513969] host=vm-vp-quantal-x86_64-33, domain=, nis-domain=(none) [ 25.516732] bootserver=10.0.2.2, rootserver=10.0.2.2, rootpath= nameserver0=10.0.2.3 [ 25.532241] Bluetooth: Starting self testing [ 25.552455] Bluetooth: ECDH test passed in 17100 usecs [ 25.558736] Bluetooth: SMP test passed in 2973 usecs [ 25.561623] Bluetooth: Finished self testing [ 25.564277] ALSA device list: [ 25.566748] #0: Loopback 1 [ 25.569136] #1: Virtual MIDI Card 1 [ 25.587079] Freeing unused kernel memory: 3348K [ 25.589643] Write protecting the kernel read-only data: 36864k [ 25.594254] Freeing unused kernel memory: 172K [ 25.617114] Freeing unused kernel memory: 1948K [ 25.668042] umount (200) used greatest stack depth: 29688 bytes left [ 25.723842] init: Failed to create pty - disabling logging for job [ 25.726977] init: Temporary process spawn error: No such file or directory [ 25.744940] init: Failed to create pty - disabling logging for job [ 25.747948] init: Temporary process spawn error: No such file or directory [ 25.781578] init: Failed to create pty - disabling logging for job [ 25.786017] init: Temporary process spawn error: No such file or directory [ 25.792529] init: Failed to create pty - disabling logging for job [ 25.797226] init: Temporary process spawn error: No such file or directory [ 25.832987] 00-header (239) used greatest stack depth: 29672 bytes left [ 25.851289] init: Failed to create pty - disabling logging for job [ 25.856250] init: Temporary process spawn error: No such file or directory [ 25.861275] init: Failed to create pty - disabling logging for job [ 25.864584] init: Temporary process spawn error: No such file or directory [ 25.870648] init: Failed to create pty - disabling logging for job [ 25.873949] init: Temporary process spawn error: No such file or directory [ 25.878767] init: Failed to create pty - disabling logging for job [ 25.882140] init: Temporary process spawn error: No such file or directory [ 25.891342] init: Failed to create pty - disabling logging for job [ 25.894733] init: Temporary process spawn error: No such file or directory [ 25.905206] init: Failed to create pty - disabling logging for job [ 25.905363] udevd[262]: starting version 175 [ 25.911751] init: Temporary process spawn error: No such file or directory [ 25.916931] init: Failed to create pty - disabling logging for job [ 25.920343] init: Temporary process spawn error: No such file or directory [ 25.927285] init: Failed to create pty - disabling logging for job [ 25.930712] init: Temporary process spawn error: No such file or directory udevd[269]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYSTM:': No such file or directory udevd[276]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory udevd[274]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0019v0000p0001e0000-e0,1,k74,ramlsfw': No such file or directory udevd[288]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00007000sv00001AF4sd00001100bc06sc01i00': No such file or directory udevd[289]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXSYBUS:': No such file or directory udevd[290]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d00001237sv00001AF4sd00001100bc06sc00i00': No such file or directory udevd[291]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv pci:v00008086d000025ABsv00001AF4sd00001100bc08sc80i00': No such file or directory udevd[294]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:Fixed MDIO bus': No such file or directory udevd[296]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:ACPI0010:PNP0A05:': No such file or directory udevd[303]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[302]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[300]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A03:': No such file or directory udevd[292]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory udevd[301]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:SP5100 TCO timer': No such file or directory udevd[299]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[298]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory udevd[297]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0103:': No such file or directory udevd[295]: failed to execute '/sbin/modprobe' '/sbin/modprobe -q fbcon': No such file or directory udevd[304]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory [ 26.055234] init: Failed to create pty - disabling logging for job [ 26.062357] init: Temporary process spawn error: No such file or directory udevd[313]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv ide:m-cdrom': No such file or directory [ 26.069083] init: Failed to create pty - disabling logging for job [ 26.072956] init: Temporary process spawn error: No such file or directory udevd[315]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0C0F:': No such file or directory udevd[317]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[316]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory udevd[320]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:QEMU0002:': No such file or directory udevd[318]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[314]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:LNXCPU:': No such file or directory udevd[324]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0A06:': No such file or directory udevd[352]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory udevd[351]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0400:': No such file or directory udevd[353]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0501:': No such file or directory udevd[350]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0303:': No such file or directory udevd[355]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0B00:': No such file or directory udevd[354]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0700:': No such file or directory [ 26.150109] init: Failed to create pty - disabling logging for job [ 26.151027] init: Temporary process spawn error: No such file or directory udevd[356]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv acpi:PNP0F13:': No such file or directory udevd[358]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:dell_rbu': No such file or directory udevd[362]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:i5k_amb': No such file or directory udevd[359]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:gpio-mockup': No such file or directory udevd[361]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:hgafb': No such file or directory udevd[366]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0002p0006e0000-e0,1,2,k110,111,112,113,114,r0,1,6,8,amlsfw': No such file or directory udevd[363]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv input:b0011v0001p0001eAB41-e0,1,4,11,14,k71,72,73,74,75,76,77,79,7A,7B,7C,7D,7E,7F,80,8C,8E,8F,9B,9C,9D,9E,9F,A3,A4,A5,A6,AC,AD,B7,B8,B9,D9,E2,ram4,l0,1,2,sfw': No such file or directory udevd[367]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:platform-framebuffer': No such file or directory udevd[364]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:pcspkr': No such file or directory udevd[370]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:vgem': No such file or directory udevd[371]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv platform:uvesafb': No such file or directory udevd[372]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv cpu:type:x86,ven0000fam0006mod0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0011,0013,0017,0018,0019,001A,002B,0034,003D,006F,0070,0072,0074,0075,0076,0079,0080,008D,0095,009F,00C0 ': No such file or directory udevd[373]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv cpu:type:x86,ven0000fam0006mod0006:feature:,0000,0002,0003,0004,0005,0006,0007,0008,0009,000B,000C,000D,000E,000F,0011,0013,0017,0018,0019,001A,002B,0034,003D,006F,0070,0072,0074,0075,0076,0079,0080,008D,0095,009F,00C0 ': No such file or directory [ 26.232963] init: Failed to create pty - disabling logging for job [ 26.233915] init: Temporary process spawn error: No such file or directory [ 26.301939] blkid (392) used greatest stack depth: 29216 bytes left udevd[393]: failed to execute '/sbin/modprobe' '/sbin/modprobe -q fbcon': No such file or directory udevd[390]: failed to execute '/sbin/modprobe' '/sbin/modprobe -bv dmi:bvnSeaBIOS:bvr1.10.2-1:bd04/01/2014:svnQEMU:pnStandardPC(i440FX+PIIX,1996):pvrpc-i440fx-2.10:cvnQEMU:ct1:cvrpc-i440fx-2.10:': No such file or directory [ 26.472960] init: Failed to create pty - disabling logging for job [ 26.474592] init: Temporary process spawn error: No such file or directory [ 26.480226] dsa-loop fixed-0:1f lan2: Link is Down [ 26.480234] dsa-loop fixed-0:1f lan1: Link is Down [ 26.490993] init: Failed to create pty - disabling logging for job [ 26.491869] init: Temporary process spawn error: No such file or directory [ 26.503502] dsa-loop fixed-0:1f lan4: Link is Down [ 26.503520] dsa-loop fixed-0:1f lan3: Link is Down [ 26.505328] init: Failed to create pty - disabling logging for job [ 26.506262] init: Temporary process spawn error: No such file or directory [ 26.518807] init: Failed to create pty - disabling logging for job [ 26.519717] init: Temporary process spawn error: No such file or directory [ 26.568366] init: failsafe main process (432) killed by TERM signal [ 26.573519] init: networking main process (428) terminated with status 1 [ 26.625496] init: Failed to create pty - disabling logging for job [ 26.626447] init: Temporary process spawn error: No such file or directory [ 26.628994] init: Failed to create pty - disabling logging for job [ 26.629888] init: Temporary process spawn error: No such file or directory [ 26.632771] init: Failed to create pty - disabling logging for job [ 26.633801] init: Temporary process spawn error: No such file or directory [ 26.641537] init: Failed to create pty - disabling logging for job [ 26.642717] init: Temporary process spawn error: No such file or directory [ 26.648914] init: Failed to create pty - disabling logging for job [ 26.649811] init: Temporary process spawn error: No such file or directory start: Job is already running: rc PATH=/sbin:/usr/sbin:/bin:/usr/bin:/lkp/lkp/src/bin Kernel tests: Boot OK! LKP: HOSTNAME vm-vp-quantal-x86_64-33, MAC 12:8d:0a:cc:22:95, kernel 4.14.0-rc8 1, serial console /dev/ttyS0 [ 26.805868] Kernel tests: Boot OK! [ 26.805877] [ 26.811253] hostname: the specified hostname is invalid [ 26.811262] umount: /tmp: device is busy. (In some cases useful info about processes that use the device is found by lsof(8) or fuser(1)) Trinity v1.4pre Dave Jones [init] Marking syscall get_robust_list (64bit:274 32bit:312) as to be disabled. Done parsing arguments. Marking all syscalls as enabled. [init] Disabling syscalls marked as disabled by command line options [init] Marked 64-bit syscall get_robust_list (274) as deactivated. [init] Marked 32-bit syscall get_robust_list (312) as deactivated. [init] 32-bit syscalls: 350 enabled, 1 disabled. 64-bit syscalls: 313 enabled, 1 disabled. DANGER: RUNNING AS ROOT. Unless you are running in a virtual machine, this could cause serious problems such as overwriting CMOS or similar which could potentially make this machine unbootable without a firmware reset. ctrl-c now unless you really know what you are doing. [ 26.891421] [ 26.935093] RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/1 [ 26.935102] [ 26.939409] job=/lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.yaml [ 26.939415] [ 26.943345] Cannot find wget/curl. [ 26.943352] [ 26.943758] run-job /lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.yaml [ 26.943764] [ 27.083147] serial8250: too much work for irq3 [ 27.130132] serial8250: too much work for irq3 [ 27.180374] serial8250: too much work for irq3 [ 27.230421] serial8250: too much work for irq3 [ 27.283530] serial8250: too much work for irq3 [ 27.333286] serial8250: too much work for irq3 [ 27.382650] serial8250: too much work for irq3 [ 27.432459] serial8250: too much work for irq3 [ 27.482766] serial8250: too much work for irq3 [ 27.533097] serial8250: too much work for irq3 [ 29.067968] [ 29.075574] /lkp/lkp/src/lib/job-init.sh: line 153: 559 Terminated tail -n 0 -f $* > $file [ 29.075581] [ 29.084930] /lkp/lkp/src/lib/job-init.sh: line 153: 560 Terminated tail -n 0 -f $* > $file [ 29.084937] [ 30.101178] [ 30.108321] wait for background monitors: 594 oom-killer [ 30.108328] [ 32.251339] [ 32.286514] Cannot find wget/curl. [ 32.286524] [ 32.303425] LKP: rebooting [ 32.303436] Elapsed time: 40 initrds=( /osimage/quantal/quantal-core-x86_64.cgz /lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.cgz /lkp/lkp/lkp-x86_64.cgz ) cat "${initrds[@]}" > /fs/sdd1/initrd-vm-vp-quantal-x86_64-33 kvm=( qemu-system-x86_64 -enable-kvm -kernel /pkg/linux/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/vmlinuz-4.14.0-rc8 -initrd /fs/sdd1/initrd-vm-vp-quantal-x86_64-33 -m 512 -smp 2 -device e1000,netdev=net0 -netdev user,id=net0 -boot order=nc -no-reboot -watchdog i6300esb -watchdog-action debug -rtc base=localtime -pidfile /dev/shm/kboot/pid-vm-vp-quantal-x86_64-33 -serial file:/dev/shm/kboot/vm-vp-quantal-x86_64-33/serial -serial file:/dev/shm/kboot/vm-vp-quantal-x86_64-33/kmsg -daemonize -display none -monitor null ) append=( ip=::::vm-vp-quantal-x86_64-33::dhcp root=/dev/ram0 user=lkp job=/lkp/scheduled/vm-vp-quantal-x86_64-33/boot-1-quantal-core-x86_64.cgz-39dae59d66acd86d1de24294bd2f343fd5e7a625-20171106-72948-14kcuxn-0.yaml ARCH=x86_64 kconfig=x86_64-randconfig-n0-10312215 branch=linus/master commit=39dae59d66acd86d1de24294bd2f343fd5e7a625 BOOT_IMAGE=/pkg/linux/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/vmlinuz-4.14.0-rc8 max_uptime=600 RESULT_ROOT=/result/boot/1/vm-vp-quantal-x86_64/quantal-core-x86_64.cgz/x86_64-randconfig-n0-10312215/gcc-4.8/39dae59d66acd86d1de24294bd2f343fd5e7a625/1 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw drbd.minor_count=8 ) "${kvm[@]}" -append "${append[*]}"