lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  PHC 
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Date:   Thu,  9 Nov 2017 14:48:30 +0100
From:   Geert Uytterhoeven <>
To:     "Rafael J . Wysocki" <>,
        Ulf Hansson <>,
        Kevin Hilman <>
Cc:     Thomas Gleixner <>,
        Jason Cooper <>,
        Marc Zyngier <>,
        Linus Walleij <>,,,,,
        Geert Uytterhoeven <>
Subject: [PATCH/RFC 0/3] renesas: irqchip: Use wakeup_path i.s.o. explicit clock handling

	Hi all,

If an interrupt controller in a Renesas ARM SoC is part of a Clock
Domain, and it is part of the wakeup path, it must be kept active during
system suspend.

Currently this is handled in all interrupt controller drivers by
explicitly increasing the use count of the module clock when the device
is part of the wakeup path.  However, this explicit clock handling is
merely a workaround for a failure to properly communicate wakeup
information to the device core.

Hence this series fixes the affected drivers by setting the devices'
power.wakeup_path fields instead, to indicate they are part of the
wakeup path.  Depending on the PM Domain's active_wakeup configuration,
the genpd core code will keep the device enabled (and the clock running)
during system suspend when needed.

Note that most of these patches depend on the series "[PATCH v2 0/3] PM
/ Domain: renesas: Fix active wakeup behavior", hence they should not be
applied yet.

This has been tested on r8a73a4/ape6evm, r8a7740/armadillo,
r8a7791/koelsch, r8a7795/salvator-x and -xs, r8a7796/salvator-x, and

Thanks for your comments!

Geert Uytterhoeven (3):
  irqchip/renesas-intc-irqpin: Use wakeup_path i.s.o. explicit clock
  irqchip/renesas-irqc: Use wakeup_path i.s.o. explicit clock handling
  gpio: rcar: Use wakeup_path i.s.o. explicit clock handling

 drivers/gpio/gpio-rcar.c                  | 43 +++++++++++++----------------
 drivers/irqchip/irq-renesas-intc-irqpin.c | 45 +++++++++++++------------------
 drivers/irqchip/irq-renesas-irqc.c        | 35 ++++++++++++------------
 3 files changed, 54 insertions(+), 69 deletions(-)




Geert Uytterhoeven -- There's lots of Linux beyond ia32 --

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
							    -- Linus Torvalds

Powered by blists - more mailing lists