| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20171110213717.12457-8-mathieu.desnoyers@efficios.com>
Date: Fri, 10 Nov 2017 16:37:14 -0500
From: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
To: Boqun Feng <boqun.feng@...il.com>,
Peter Zijlstra <peterz@...radead.org>,
"Paul E . McKenney" <paulmck@...ux.vnet.ibm.com>
Cc: linux-kernel@...r.kernel.org, linux-api@...r.kernel.org,
Andy Lutomirski <luto@...nel.org>,
Andrew Hunter <ahh@...gle.com>,
Maged Michael <maged.michael@...il.com>,
Avi Kivity <avi@...lladb.com>,
Benjamin Herrenschmidt <benh@...nel.crashing.org>,
Paul Mackerras <paulus@...ba.org>,
Michael Ellerman <mpe@...erman.id.au>,
Dave Watson <davejwatson@...com>,
Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>,
"H . Peter Anvin" <hpa@...or.com>,
Andrea Parri <parri.andrea@...il.com>,
Russell King <linux@...linux.org.uk>,
Greg Hackmann <ghackmann@...gle.com>,
Will Deacon <will.deacon@....com>,
David Sehr <sehr@...gle.com>,
Linus Torvalds <torvalds@...ux-foundation.org>, x86@...nel.org,
Mathieu Desnoyers <mathieu.desnoyers@...icios.com>,
linux-arch@...r.kernel.org
Subject: [RFC PATCH v2 for 4.15 07/10] membarrier: x86: Provide core serializing command
There are two places where core serialization is needed by membarrier:
1) When returning from the membarrier IPI,
2) After scheduler updates curr to a thread with a different mm, before
going back to user-space, since the curr->mm is used by membarrier to
check whether it needs to send an IPI to that CPU.
x86-32 uses iret as return from interrupt, and both iret and sysexit to go
back to user-space. The iret instruction is core serializing, but not
sysexit.
x86-64 uses iret as return from interrupt, which takes care of the IPI.
However, it can return to user-space through either sysretl (compat
code), sysretq, or iret. Given that sysret{l,q} is not core serializing,
we rely instead on write_cr3() performed by switch_mm() to provide core
serialization after changing the current mm, and deal with the special
case of kthread -> uthread (temporarily keeping current mm into
active_mm) by adding a sync_core_before_usermode() in that specific case.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@...icios.com>
CC: Peter Zijlstra <peterz@...radead.org>
CC: Andy Lutomirski <luto@...nel.org>
CC: Paul E. McKenney <paulmck@...ux.vnet.ibm.com>
CC: Boqun Feng <boqun.feng@...il.com>
CC: Andrew Hunter <ahh@...gle.com>
CC: Maged Michael <maged.michael@...il.com>
CC: Avi Kivity <avi@...lladb.com>
CC: Benjamin Herrenschmidt <benh@...nel.crashing.org>
CC: Paul Mackerras <paulus@...ba.org>
CC: Michael Ellerman <mpe@...erman.id.au>
CC: Dave Watson <davejwatson@...com>
CC: Thomas Gleixner <tglx@...utronix.de>
CC: Ingo Molnar <mingo@...hat.com>
CC: "H. Peter Anvin" <hpa@...or.com>
CC: Andrea Parri <parri.andrea@...il.com>
CC: Russell King <linux@...linux.org.uk>
CC: Greg Hackmann <ghackmann@...gle.com>
CC: Will Deacon <will.deacon@....com>
CC: David Sehr <sehr@...gle.com>
CC: x86@...nel.org
CC: linux-arch@...r.kernel.org
---
Changes since v1:
- Use the newly introduced sync_core_before_usermode(). Move all state
handling to generic code.
---
arch/x86/Kconfig | 1 +
arch/x86/entry/entry_32.S | 5 +++++
arch/x86/entry/entry_64.S | 8 ++++++++
arch/x86/mm/tlb.c | 7 ++++---
include/linux/sched/mm.h | 12 ++++++++++++
kernel/sched/core.c | 6 +++++-
kernel/sched/membarrier.c | 4 ++++
7 files changed, 39 insertions(+), 4 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 54fbb8960d94..94bdf5fc7d94 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -54,6 +54,7 @@ config X86
select ARCH_HAS_FORTIFY_SOURCE
select ARCH_HAS_GCOV_PROFILE_ALL
select ARCH_HAS_KCOV if X86_64
+ select ARCH_HAS_MEMBARRIER_SYNC_CORE
select ARCH_HAS_PMEM_API if X86_64
# Causing hangs/crashes, see the commit that added this change for details.
select ARCH_HAS_REFCOUNT if BROKEN
diff --git a/arch/x86/entry/entry_32.S b/arch/x86/entry/entry_32.S
index 4838037f97f6..04e5daba8456 100644
--- a/arch/x86/entry/entry_32.S
+++ b/arch/x86/entry/entry_32.S
@@ -553,6 +553,11 @@ restore_all:
.Lrestore_nocheck:
RESTORE_REGS 4 # skip orig_eax/error_code
.Lirq_return:
+ /*
+ * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on iret core serialization
+ * when returning from IPI handler and when returning from
+ * scheduler to user-space.
+ */
INTERRUPT_RETURN
.section .fixup, "ax"
diff --git a/arch/x86/entry/entry_64.S b/arch/x86/entry/entry_64.S
index bcfc5668dcb2..4859f04e1695 100644
--- a/arch/x86/entry/entry_64.S
+++ b/arch/x86/entry/entry_64.S
@@ -642,6 +642,10 @@ GLOBAL(restore_regs_and_iret)
restore_c_regs_and_iret:
RESTORE_C_REGS
REMOVE_PT_GPREGS_FROM_STACK 8
+ /*
+ * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on iret core serialization
+ * when returning from IPI handler.
+ */
INTERRUPT_RETURN
ENTRY(native_iret)
@@ -1122,6 +1126,10 @@ paranoid_exit_restore:
RESTORE_EXTRA_REGS
RESTORE_C_REGS
REMOVE_PT_GPREGS_FROM_STACK 8
+ /*
+ * ARCH_HAS_MEMBARRIER_SYNC_CORE rely on iret core serialization
+ * when returning from IPI handler.
+ */
INTERRUPT_RETURN
END(paranoid_exit)
diff --git a/arch/x86/mm/tlb.c b/arch/x86/mm/tlb.c
index 5abf9bfcca1f..3b13d6735fa5 100644
--- a/arch/x86/mm/tlb.c
+++ b/arch/x86/mm/tlb.c
@@ -147,9 +147,10 @@ void switch_mm_irqs_off(struct mm_struct *prev, struct mm_struct *next,
this_cpu_write(cpu_tlbstate.is_lazy, false);
/*
- * The membarrier system call requires a full memory barrier
- * before returning to user-space, after storing to rq->curr.
- * Writing to CR3 provides that full memory barrier.
+ * The membarrier system call requires a full memory barrier and
+ * core serialization before returning to user-space, after
+ * storing to rq->curr. Writing to CR3 provides that full
+ * memory barrier and core serializing instruction.
*/
if (real_prev == next) {
VM_WARN_ON(this_cpu_read(cpu_tlbstate.ctxs[prev_asid].ctx_id) !=
diff --git a/include/linux/sched/mm.h b/include/linux/sched/mm.h
index 49a5b37a215a..6d7399a9185c 100644
--- a/include/linux/sched/mm.h
+++ b/include/linux/sched/mm.h
@@ -222,6 +222,7 @@ enum {
MEMBARRIER_STATE_PRIVATE_EXPEDITED_READY = (1U << 0),
MEMBARRIER_STATE_PRIVATE_EXPEDITED = (1U << 1),
MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE_READY = (1U << 2),
+ MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE = (1U << 3),
};
enum {
@@ -232,6 +233,14 @@ enum {
#include <asm/membarrier.h>
#endif
+static inline void membarrier_mm_sync_core_before_usermode(struct mm_struct *mm)
+{
+ if (likely(!(atomic_read(&mm->membarrier_state) &
+ MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE)))
+ return;
+ sync_core_before_usermode();
+}
+
static inline void membarrier_execve(struct task_struct *t)
{
atomic_set(&t->mm->membarrier_state, 0);
@@ -246,6 +255,9 @@ static inline void membarrier_arch_switch_mm(struct mm_struct *prev,
static inline void membarrier_execve(struct task_struct *t)
{
}
+static inline void membarrier_mm_sync_core_before_usermode(struct mm_struct *mm)
+{
+}
#endif
#endif /* _LINUX_SCHED_MM_H */
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 4a1c9782267a..c3b8248c684d 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -2700,9 +2700,13 @@ static struct rq *finish_task_switch(struct task_struct *prev)
* thread, mmdrop()'s implicit full barrier is required by the
* membarrier system call, because the current active_mm can
* become the current mm without going through switch_mm().
+ * membarrier also requires a core serializing instruction
+ * before going back to user-space after storing to rq->curr.
*/
- if (mm)
+ if (mm) {
mmdrop(mm);
+ membarrier_mm_sync_core_before_usermode(mm);
+ }
if (unlikely(prev_state == TASK_DEAD)) {
if (prev->sched_class->task_dead)
prev->sched_class->task_dead(prev);
diff --git a/kernel/sched/membarrier.c b/kernel/sched/membarrier.c
index 82efa7c64902..c240158138ee 100644
--- a/kernel/sched/membarrier.c
+++ b/kernel/sched/membarrier.c
@@ -141,6 +141,10 @@ static int membarrier_register_private_expedited(int flags)
return 0;
atomic_or(MEMBARRIER_STATE_PRIVATE_EXPEDITED,
&mm->membarrier_state);
+ if (flags & MEMBARRIER_FLAG_SYNC_CORE) {
+ atomic_or(MEMBARRIER_STATE_PRIVATE_EXPEDITED_SYNC_CORE,
+ &mm->membarrier_state);
+ }
if (!(atomic_read(&mm->mm_users) == 1 && get_nr_threads(p) == 1)) {
/*
* Ensure all future scheduler executions will observe the
--
2.11.0
Powered by blists - more mailing lists