[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <55121e359ace8568711411de7da68205fc039d56.1510520397.git.hns@goldelico.com>
Date: Sun, 12 Nov 2017 21:59:57 +0100
From: "H. Nikolaus Schaller" <hns@...delico.com>
To: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
BenoƮt Cousson <bcousson@...libre.com>,
Tony Lindgren <tony@...mide.com>,
Russell King <linux@...linux.org.uk>,
"H. Nikolaus Schaller" <hns@...delico.com>,
Thierry Reding <treding@...dia.com>,
Jonathan Cameron <jic23@...nel.org>,
Maxime Ripard <maxime.ripard@...e-electrons.com>,
Jarkko Sakkinen <jarkko.sakkinen@...ux.intel.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org, letux-kernel@...nphoenux.org,
kernel@...a-handheld.com
Subject: [PATCH v2 4/5] DTS: gta04: add serdev node for w2sg00x4
GTA04 has a W2SG0004/84 connected to UART2 of the OMAP3
processor. A GPIO can pulse the on/off toggle switch.
The VSIM regulator is used to power on/off the LNA of an external
active GPS antenna so that a driver can turn the LNA off if GPS is
not needed to save battery energy.
Signed-off-by: H. Nikolaus Schaller <hns@...delico.com>
---
arch/arm/boot/dts/omap3-gta04.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/omap3-gta04.dtsi b/arch/arm/boot/dts/omap3-gta04.dtsi
index 4504908c23fe..e967d738aaaf 100644
--- a/arch/arm/boot/dts/omap3-gta04.dtsi
+++ b/arch/arm/boot/dts/omap3-gta04.dtsi
@@ -477,6 +477,12 @@
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&uart2_pins>;
+
+ gps: gps {
+ compatible = "wi2wi,w2sg0004";
+ lna-supply = <&vsim>; /* LNA regulator */
+ enable-gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; /* GPIO_145: trigger for turning on/off w2sg0004 */
+ };
};
&uart3 {
--
2.12.2
Powered by blists - more mailing lists