| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1510551394-20175-1-git-send-email-anju@linux.vnet.ibm.com>
Date: Mon, 13 Nov 2017 11:06:34 +0530
From: Anju T Sudhakar <anju@...ux.vnet.ibm.com>
To: mpe@...erman.id.au
Cc: linuxppc-dev@...ts.ozlabs.org, linux-kernel@...r.kernel.org,
maddy@...ux.vnet.ibm.com, anju@...ux.vnet.ibm.com
Subject: [PATCH] powerpc/perf: Add debugfs interface for imc run-mode and run-status
In memory Collection (IMC) counter pmu driver controls the ucode's execution
state. At the system boot, IMC perf driver pause the ucode. Ucode state is
changed to "running" only when any of the nest units are monitored or profiled
using perf tool.
Nest units support only limited set of hardware counters and ucode is always
programmed in the "production mode" ("accumulation") mode. This mode is
configured to provide key performance metric data for most of the nest units.
But ucode also supports other modes which would be used for "debug" to drill
down specific nest units. That is, ucode when switched to "powerbus" debug
mode (for example), will dynamically reconfigure the nest counters to target
only "powerbus" related events in the hardware counters. This allows the IMC
nest unit to focus on powerbus related transactions in the system in more
detail. At this point, production mode events may or may not be counted.
IMC nest counters has both in-band (ucode access) and out of band access to it.
Since not all nest counter configurations are supported by ucode, out of band
tools are used to characterize other nest counter configurations.
Patch provides an interface via "debugfs" to enable the switching of ucode
modes in the system. To switch ucode mode, one has to first pause the microcode
(imc_cmd), and then write the target mode value to the "imc_mode" file.
Proposed Approach
===================
In the proposed approach, the function (export_imc_mode_and_cmd) which creates
the debugfs interface for imc mode and command is implemented in opal-imc.c.
Thus we can use imc_get_mem_addr() to get the homer base address for each chip.
The interface to expose imc mode and command is required only if we have nest
pmu units registered. Employing the existing data structures to track whether
we have any nest units registered will require to extend data from perf side
to opal-imc.c. Instead an integer is introduced to hold that information by
counting successful nest unit registration. Debugfs interface is removed
based on the integer count.
Example for the interface:
root@...X:/sys/kernel/debug/imc# ls
imc_cmd_0 imc_cmd_8 imc_mode_0 imc_mode_8
Signed-off-by: Anju T Sudhakar <anju@...ux.vnet.ibm.com>
---
arch/powerpc/include/asm/imc-pmu.h | 7 +++
arch/powerpc/platforms/powernv/opal-imc.c | 74 ++++++++++++++++++++++++++++++-
2 files changed, 79 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/include/asm/imc-pmu.h b/arch/powerpc/include/asm/imc-pmu.h
index 7f74c28..317002d 100644
--- a/arch/powerpc/include/asm/imc-pmu.h
+++ b/arch/powerpc/include/asm/imc-pmu.h
@@ -40,6 +40,13 @@
#define THREAD_IMC_ENABLE 0x8000000000000000ULL
/*
+ * For debugfs interface for imc-mode and imc-command
+ */
+#define IMC_CNTL_BLK_OFFSET 0x3FC00
+#define IMC_CNTL_BLK_CMD_OFFSET 8
+#define IMC_CNTL_BLK_MODE_OFFSET 32
+
+/*
* Structure to hold memory address information for imc units.
*/
struct imc_mem_info {
diff --git a/arch/powerpc/platforms/powernv/opal-imc.c b/arch/powerpc/platforms/powernv/opal-imc.c
index 21f6531..a88ddab 100644
--- a/arch/powerpc/platforms/powernv/opal-imc.c
+++ b/arch/powerpc/platforms/powernv/opal-imc.c
@@ -21,6 +21,70 @@
#include <asm/io.h>
#include <asm/imc-pmu.h>
#include <asm/cputhreads.h>
+#include <linux/debugfs.h>
+
+static struct dentry *parent;
+
+/* Helpers to export imc command and status via debugfs */
+static int debugfs_imc_mem_get(void *data, u64 *val)
+{
+ *val = cpu_to_be64(*(u64 *)data);
+ return 0;
+}
+
+static int debugfs_imc_mem_set(void *data, u64 val)
+{
+ *(u64 *)data = cpu_to_be64(val);
+ return 0;
+}
+DEFINE_DEBUGFS_ATTRIBUTE(fops_imc_x64, debugfs_imc_mem_get, debugfs_imc_mem_set,
+ "0x%016llx\n");
+
+static struct dentry *debugfs_create_imc_x64(const char *name, umode_t mode,
+ struct dentry *parent, u64 *value)
+{
+ return debugfs_create_file_unsafe(name, mode, parent, value, &fops_imc_x64);
+}
+
+/*
+ * export_imc_mode_and_cmd: Create a debugfs interface
+ * for imc_cmd and imc_mode
+ * for each node in the system.
+ * imc_mode and imc_cmd can be changed by echo into
+ * this interface.
+ */
+static void export_imc_mode_and_cmd(struct imc_pmu *pmu_ptr)
+{
+ static u64 loc, *imc_mode_addr, *imc_cmd_addr;
+ int i = 0, nid;
+ char mode[16], cmd[16];
+
+ parent = debugfs_create_dir("imc", NULL);
+ /*
+ * Return here, either because 'imc' directory already exists,
+ * Or failed to create a new one.
+ */
+ if (!parent)
+ return;
+
+ for_each_node(nid) {
+ loc = (u64)(pmu_ptr->mem_info[i].vbase) + IMC_CNTL_BLK_OFFSET;
+ imc_mode_addr = (u64 *)(loc + IMC_CNTL_BLK_MODE_OFFSET);
+ sprintf(mode, "imc_mode_%d", nid);
+ if (!debugfs_create_imc_x64(mode, 0600, parent, imc_mode_addr))
+ goto err;
+
+ imc_cmd_addr = (u64 *)(loc + IMC_CNTL_BLK_CMD_OFFSET);
+ sprintf(cmd, "imc_cmd_%d", nid);
+ if (!debugfs_create_imc_x64(cmd, 0600, parent, imc_cmd_addr))
+ goto err;
+ i++;
+ }
+ return;
+
+err:
+ debugfs_remove_recursive(parent);
+}
/*
* imc_get_mem_addr_nest: Function to get nest counter memory region
@@ -65,6 +129,7 @@ static int imc_get_mem_addr_nest(struct device_node *node,
}
pmu_ptr->imc_counter_mmaped = true;
+ export_imc_mode_and_cmd(pmu_ptr);
kfree(base_addr_arr);
kfree(chipid_arr);
return 0;
@@ -156,7 +221,7 @@ static void disable_core_pmu_counters(void)
static int opal_imc_counters_probe(struct platform_device *pdev)
{
struct device_node *imc_dev = pdev->dev.of_node;
- int pmu_count = 0, domain;
+ int pmu_count = 0, domain, nest_pmus = 0;
u32 type;
/*
@@ -191,9 +256,14 @@ static int opal_imc_counters_probe(struct platform_device *pdev)
break;
}
- if (!imc_pmu_create(imc_dev, pmu_count, domain))
+ if (!imc_pmu_create(imc_dev, pmu_count, domain)) {
+ if (domain == IMC_DOMAIN_NEST)
+ nest_pmus++;
pmu_count++;
+ }
}
+ if (nest_pmus == 0)
+ debugfs_remove_recursive(parent);
return 0;
}
--
2.7.4
Powered by blists - more mailing lists