[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20171113080155.2463-1-yixun.lan@amlogic.com>
Date: Mon, 13 Nov 2017 16:01:55 +0800
From: Yixun Lan <yixun.lan@...ogic.com>
To: <devicetree@...r.kernel.org>, Kevin Hilman <khilman@...libre.com>
CC: Neil Armstrong <narmstrong@...libre.com>,
Jerome Brunet <jbrunet@...libre.com>,
Giuseppe Cavallaro <peppe.cavallaro@...com>,
Alexandre Torgue <alexandre.torgue@...com>,
Carlo Caione <carlo@...one.org>,
Yixun Lan <yixun.lan@...ogic.com>,
<linux-amlogic@...ts.infradead.org>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>, <netdev@...r.kernel.org>
Subject: [PATCH] ARM64: dts: meson-axg: add ethernet mac controller
Add DT info for the stmmac ethernet MAC which found in
the Amlogic's Meson-AXG SoC, also describe the ethernet
pinctrl & clock information here.
This is tested in the S400 dev board which use a RTL8211F PHY,
and the pins connect to the 'eth_rgmii_y_pins' group.
Signed-off-by: Yixun Lan <yixun.lan@...ogic.com>
---
arch/arm64/boot/dts/amlogic/meson-axg-s400.dts | 7 ++++
arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 53 ++++++++++++++++++++++++++
2 files changed, 60 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
index 9eb6aaee155d..7b39a9fe2b0f 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-axg-s400.dts
@@ -21,3 +21,10 @@
status = "okay";
};
+ðmac {
+ status = "okay";
+ phy-mode = "rgmii";
+
+ pinctrl-0 = <ð_rgmii_y_pins>;
+ pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 65945c6c8b65..57faaa9d8013 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -157,6 +157,19 @@
#address-cells = <0>;
};
+ ethmac: ethernet@...f0000 {
+ compatible = "amlogic,meson-axg-dwmac", "amlogic,meson-gxbb-dwmac", "snps,dwmac";
+ reg = <0x0 0xff3f0000 0x0 0x10000
+ 0x0 0xff634540 0x0 0x8>;
+ interrupts = <GIC_SPI 8 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "macirq";
+ status = "disabled";
+ clocks = <&clkc CLKID_ETH>,
+ <&clkc CLKID_FCLK_DIV2>,
+ <&clkc CLKID_MPLL2>;
+ clock-names = "stmmaceth", "clkin0", "clkin1";
+ };
+
hiubus: hiubus@...3c000 {
compatible = "simple-bus";
reg = <0x0 0xff63c000 0x0 0x1c00>;
@@ -203,6 +216,46 @@
#gpio-cells = <2>;
gpio-ranges = <&pinctrl_periphs 0 0 86>;
};
+
+ eth_rgmii_x_pins: eth-x-rgmii {
+ mux {
+ groups = "eth_mdio_x",
+ "eth_mdc_x",
+ "eth_rgmii_rx_clk_x",
+ "eth_rx_dv_x",
+ "eth_rxd0_x",
+ "eth_rxd1_x",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_x",
+ "eth_txd0_x",
+ "eth_txd1_x",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
+
+ eth_rgmii_y_pins: eth-y-rgmii {
+ mux {
+ groups = "eth_mdio_y",
+ "eth_mdc_y",
+ "eth_rgmii_rx_clk_y",
+ "eth_rx_dv_y",
+ "eth_rxd0_y",
+ "eth_rxd1_y",
+ "eth_rxd2_rgmii",
+ "eth_rxd3_rgmii",
+ "eth_rgmii_tx_clk",
+ "eth_txen_y",
+ "eth_txd0_y",
+ "eth_txd1_y",
+ "eth_txd2_rgmii",
+ "eth_txd3_rgmii";
+ function = "eth";
+ };
+ };
};
};
--
2.14.1
Powered by blists - more mailing lists